Defender Pro Scout Max Extreme User guide

Brand: Defender

Model: Pro Scout Max Extreme

Type: User guide

Defender Pro Scout Max Extreme is a versatile and feature-rich trail camera that allows you to capture stunning images and videos of wildlife in their natural habitat. With its cellular connectivity, you can access your camera remotely and receive real-time updates on captured media. The camera also boasts an impressive array of settings, including adjustable capture delay, customizable picture size, and multi-shot capabilities. Additionally, it features a motion test mode to help you fine-tune the PIR range and ensure optimal performance in the field.

CELLULAR SETUP

Download the Strike Force Wireless app from the App Store or Google

Play on your mobile device. Set up an account on the new App. From

the App, select “Setup New Camera”. This will bring up a QR code reader.

Power on the trail camera and press the Mode button. Highlight

either ATT or Verizon as your preferred carrier. Confirm your selection.

Scan the QR Code that appears on the camera’s screen with the QR

code reader on your mobile app. This will register the camera informat ion

on your Strike Force Wireless account. Follow the App instructions

for picking your camera’s data. After 5 minutes, your camera will be set

up on the cellular network.

You can do a manual test by navigating to the LTE TEST camera menu.

This will make test communication to your account at

Strike Force Wireless.

CAMERA SETTINGS

After powering on the trail camera, press the mode button to access the avaliable

setting options. The setting options are as follows:

Set Date

Set Time

Camera Mode: Trail / Video

Capture Delay:1, 5, 10, 30 seconds, 1, 2, 5, 10, 30, 60 minutes

Picture Size: 2, 4, 8 or 20MP

MultiShot: 1-8 shots per trigger

Temperature Units: Fahrenheit or Celcius

Picture Info Strop: on / off

SD Card Management: on / off

Motion Test: Activate to test the PIR range and check setup in the field.

Camera Name: Add a custom name for your camera in tis field.

Set Default: Resets your camera to factory defaults.

Delete All: This erases and reformats your SD card.

Software Update: You can update your camera software here.

LTE Test: You can run a manual cellular test here by pressing the OK button.

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject

to the following two conditions: (1) this device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses

and can radiate radio frequency energy and, if not installed and used

in accordance with the instructions, may cause harmful interference to

radio communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged

to try to correct the interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between th e equipment and receiver.

• Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement: This equipment complies with FCC

radiation exposure limits set forth for an uncontrolled environment. In

order to avoid the possibility of exceeding the FCC radio frequency

exposure limits, Human proximity to the antenna shall not be less than

20cm (8 inches) during normal operation.

Shielded cables with ferrite must be used with this unit to ensure

compliance with the Class B FCC limits.

Warning: Changes or modifications to this unit not expressly approved

by the party responsible for compliance could void the user’s autho rity

to operate the equipment.

This user manual covers both versions of the

Defender Pro Scout Max Extreme Cameras

Model Number: BTC-PSMX

FCC ID: 2ALGTBTC-PSMX

Defender Pro Scout Max Extreme User guide

Defender Pro Scout Max Extreme User guide

Defender Pro Scout Max Extreme User guide

Other documents