GIMME GKP1 Operating instructions

Type
Operating instructions

GIMME GKP1 is a plug-and-play device that allows you to transfer DEX files from vending machines and grocery stores to your smartphone. It connects directly within the app, eliminating the need for pairing via Bluetooth. The device is entirely self-contained, requiring no charging, and has a long battery life of 2-7 years depending on usage frequency. To use it, simply insert the device into any compatible DEX port and follow the instructions in the app.

GIMME GKP1 is a plug-and-play device that allows you to transfer DEX files from vending machines and grocery stores to your smartphone. It connects directly within the app, eliminating the need for pairing via Bluetooth. The device is entirely self-contained, requiring no charging, and has a long battery life of 2-7 years depending on usage frequency. To use it, simply insert the device into any compatible DEX port and follow the instructions in the app.

Gimme, Gimme Vending, Gimme DSD, and the Stylized “G” and “Gimme” logos are trademarks of Gimme Vending, Inc.
All other trademarks are the property of their respective owners. © 2021 Gimme Vending, Inc. All rights reserved.
www.gimmeDSD.com
Gimme Key Pro™
by Gimme Vending, Inc.
Usage Notes
The Gimme Key Pro is a plug-and-play device. There are no user-operable buttons, switches,
options, etc. The unit is entirely self-contained and does not require charging, with a battery
lifespan of 2-7 years, depending on usage frequency.
The device requires a compatible software app to transfer DEX files. A publicly available
demonstration app is the “Gimme DEX” app on the App Store. Click here for the link.
It is not necessary to pair the device using the system bluetooth menu. The device is designed
to connect directly within the app. Some apps connect automatically, with no additional steps, if
there is only one device nearby.
Usage Instructions
Simply insert the device into any vending machine or grocery store DEX port.
Support
[email protected] or 888-988-4161
Holster Sensor FCC/IC Label
FCC 2AZNZGKP1/ IC 27206-GKP1
This device complies with Part 15 of the FCC Rul
es.
Operation is subject to the following conditions: (1) This
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
Le présent appareil est confor
me aux CNR d’Industrie
Canada applicables aux appareils radio exempts de
licence. L’exploitation est autorisée aux deux conditions
suivantes: (1) l’appareil ne doit pas produire de
brouillage, et (2) l’utilisateur de l’appareil doit accepter
tout brouillage radioélectrique subi, même si le brouillage
est susceptible d’en compromettre le fonctionnement.
INFORMATION TO USER
The users manual or instruction manual for an
intentional or unintentional radiator shall caution
the user that changes or modifications not expressly
approved by the party responsible for compliance
could void the user’s authority to operate the
equipment. In cases where the manual is provided
only in a form other than paper, such as on a
computer disk or over the internet, the information
required by this section may be included in the
manual in that alternative form, provided the user
can reasonably be expected to have the capability to
access information in that form.
  • Page 1 1

GIMME GKP1 Operating instructions

Type
Operating instructions

GIMME GKP1 is a plug-and-play device that allows you to transfer DEX files from vending machines and grocery stores to your smartphone. It connects directly within the app, eliminating the need for pairing via Bluetooth. The device is entirely self-contained, requiring no charging, and has a long battery life of 2-7 years depending on usage frequency. To use it, simply insert the device into any compatible DEX port and follow the instructions in the app.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages