2. PurePro
  3. Pro100
Pro100

PurePro Pro100 Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the PurePro Pro100 Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
1
®
PRO100 and PRO100BN
Available in Polished Chrome and Brushed Nickel.
Pipe tape
Hex wrench
Philips Screwdriver
Adjustable wrench
Pliers
Silicone sealant
Tools:
Cleaning:
To maintain and protect the fine luster of all products, clean with a soft damp cloth only.
DO NOT USE harsh chemicals or cleaners as they may harm the protective finish.
© 2021
Made in China
Remove the dispensing head assembly, washer and
nut from soap dispenser sleeve.
Insert soap dispenser sleeve through sink hole and
secure with washer and nut.
1 2
Ø1 1/4"~Ø1 1/2"
(Ø32mm~Ø38mm)
1 9/16"Max
(39mm)Max
This product is used to illustrate installation.
Soap Dispenser
Warning and Notes:
Installation Steps:
PRO100 and PRO100BN
Available in Polished Chrome and Brushed Nickel.
Pipe tape
Hex wrench
Philips Screwdriver
Adjustable wrench
Pliers
Silicone sealant
Tools:
Cleaning:
To maintain and protect the fine luster of all products, clean with a soft damp cloth only.
DO NOT USE harsh chemicals or cleaners as they may harm the protective finish.
Remove the dispensing head assembly, washer and
nut from soap dispenser sleeve.
Insert soap dispenser sleeve through sink hole and
secure with washer and nut.
1 2
Ø1 1/4"~Ø1 1/2"
(Ø32mm~Ø38mm)
1 9/16"Max
(39mm)Max
This product is used to illustrate installation.
Soap Dispenser
Warning and Notes:
Installation Steps:
2
Screw soap bottle into soap dispenser sleeve,
tighten by Adjustable wrench.
Pour in liquid soap ( or hand lotion).
4
6
Put the pump nozzle and plastic pump into sleeve. Pump dispensing head several times until
soap/lotion comes out freely.
Customer Service
For additional assistance, service or parts,
call 1-888-328-2383
Screw soap bottle into soap dispenser sleeve,
tighten by Adjustable wrench.
Pour in liquid soap ( or hand lotion).
3 4
5 6
Put the pump nozzle and plastic pump into sleeve. Pump dispensing head several times until
soap/lotion comes out freely.
Customer Service
For additional assistance, service or parts,
call 1-888-328-2383
/