Reliable Brio 220CC User manual

Category
Steam cleaners
Type
User manual
MULTIPURPOSE STEAM CLEANER
SYSTEME D’ASPIRATEUR
LIMPIADOR A VAPOR
INSTRUCTION MANUAL
GUIDE D’UTILISATION
MANUAL DE INSTRUCCIONES
BRIO 220CC
ENGLISH 01
FRANÇAIS 20
ESPOL 39
01
THE BRIO 220CC
MULTIPURPOSE STEAM CLEANER
INSTRUCTION MANUAL
ENGLISH
02
RELIABLE. RIGHT THERE WITH YOU.
At Reliable, we do what we love, and take pride in doing it right.
You want what’s best for the people, places and things that matter
in your life – from where you live to what you wear. So do we. From
the start, we approach every product with a craftsmans attention
to detail and passion for making it right. Quality, functionality,
design and customer service play an equally important part in
delivering what’s right for you.
For your safety and to fully enjoy the advantages of this product,
please take a few minutes to read all the important safeguards and
care instructions. Keep this manual handy and review the product
warranty for your reference.
THANK YOU FOR YOUR PURCHASE. PLEASE SHARE YOUR
RELIABLE PRODUCT EXPERIENCE BY POSTING AN ONLINE
REVIEW ON THE WEBSITE FROM WHICH YOU PURCHASED.
WE GREATLY APPRECIATE IT!
03
Brio 220CC Refill Instructions
• When the low water light turns on, it is time to refill your steam cleaner.
• Push the power button to turn off the unit.
• Depress the steam trigger to release the remaining steam pressure.
• Wait 5-8 minutes for the tank to cool down.*
• Turn the boiler cap counter-clockwise to remove. You are now ready to refill your
unit.
*If the boiler cap continues to spin and cannot be removed, the unit has not finished cooling down.
PLEASE READ
04
IMPORTANT SAFEGUARDS – SAVE
THESE INSTRUCTIONS IN A SAFE PLACE
FOR FUTURE REFERENCE
READ ALL INSTRUCTIONS BEFORE USE
When using your Brio 220CC steam cleaner, basic safety precautions should
always be followed. Please read the following instructions carefully as they
provide important information concerning how to install, use and care for this
product. The appliance is designed for household use and may only be operated in
accordance with these instructions for use. The appliance generates high
temperature steam. Always handle with care and warn other users of potential
danger.
DANGER TO CHILDREN
This appliance is not suitable for use by people – including children – with
reduced physical, sensorial or mental capabilities; by people with little or
no experience or awareness of the appliance, unless carefully supervised or
trained in the use of the appliance by a person responsible for their safety.
It is necessary to supervise children to make sure that they do not play with
the appliance.
When disposing of the appliance as waste, it must be made inoperative by
removing the power cord. Also remember to make any parts of the potentially
hazardous parts of the appliance safe, as there is a risk that children may use
them as playthings.
Packaging elements must not be left in reach of children as they are
potentially hazardous.
DANGER FROM ELECTRICITY
Make sure that the power voltage of the appliance corresponds to that of
your electricity.
Always connect the appliance to a properly grounded socket.
Never leave the appliance unattended when it is plugged in; unplug it after
every use and before servicing.
Always switch off the appliance at the main switch and unplug It from the
socket before refilling it.
Make sure that hands are dry before using or adjusting the appliance switches,
before touching the plug or power connections.
05
DANGER FROM OTHER CAUSES
Never leave the appliance exposed to the elements (rain, sunshine, etc.).
Never place the appliance on or near to sources of heat.
Make sure that the power cord does not come into contact with hot surfaces.
Never point steam jets in the direction of people, animals or plants or towards
appliances that contain electrical parts (e.g., oven interiors).
Never direct steam jets onto the appliance itself.
Never immerse the body of the appliance, plug or power cord in water or other
liquids; clean them with a damp cloth.‘
Never use the appliance if the power cord or plug are damaged or if the appli-
ance is faulty / damaged.
All repairs, including the replacement of the power cord, must only be carried
out by Reliable corporation or technicians authorized by Reliable.
This appliance has been designed for domestic use only and may not be used
for commercial or industrial purposes. This appliance is for household use only.
During use, the appliance contains pressurised steam: improper use can be
dangerous. The appliance is designed for domestic use only, as stated in
the manual. The manufacturer cannot accept any liability for damage cause
through improper or incorrect use of the appliance.
When the appliance is not in use, always lock the steam dispensing button.
06
1. Funnel 6. Small nylon brush (3) 11. Jet nozzle
2. Measuring jug 7. Large nylon brush (3) 12. Floor pad
3. Steam hose complete 8. Brass brush (2) 13. Floor brush
4. Accessory adaptor 9. Cotton cover for
window attachment
15. Storage Case
5. Angled connector for
floor blush
10. Window cleaning
attachment
BRIO 220CC KEY FEATURES
1
2
3
4
11
12
14
13
10
986
7
5
14. Extension tubes (2)
15
07
SAFETY REGULATIONS
Please ensure that the voltage shown on the rating plate matches that
of your socket prior to connect the steam cleaner to your mains power
supply.
Only connect the appliance to a proper grounded socket.
The appliance’s plug must fit into the socket. The plug may not be modi-
fied in any way. Do not use adaptors with appliances that have a protective
earths Unmodified plugs and appropriate sockets reduce the risk of an
electric shock.
We recommend that the appliance only be operated from a socket pro-
tected by a residual current circuit-breaker. Please consult an electrician if
necessary,
Never touch the plug with wet hands.
Always disconnect the appliance from the mains by removing the mains
plug from the socket. Never pull on the cable!
A faulty connection cable may only be replaced by a cable with identical
connection values. Send the appliance to the Appliance Customer Service
Centre for repair.
Ensure that the connection values match those of the steam cleaner if
using an extension cable. Ask a specialist dealer if necessary.
Ensure that the cable does not become a tripping hazard. It can not be
kinked, pinched or run over.
SPECIAL GROUPS OF PEOPLE
Take extreme care if using the appliance in the presence of children or the
handicapped!
Never leave the steam cleaner unattended particularly if children or handi-
capped persons are in the same room.
The appliance must be stored out of the reach of children.
Do not allow children to play with the packaging materials (plastic film).
08
SET UP
The steam hose with steam gun must be connected to the appliance, and the
desired accessory must be attached before the Brio 220CC can be used.
Start by connecting the steam hose to the steam socket on the front of the Brio
220CC. To do this, flip the cover flap down, align the steam hose with the bottom
notch and push the connector of the steam hose firmly into the steam socket until it
clicks into place (Fig.4).
To remove the steam hose, press in both release buttons on the right and left hand
sides of the steam connector and pull it out from the steam socket (Fig.5).
Assemble the extension hoses if the steam cleaner is to be used to clean floors or
difficult to reach areas. To do this, push the open end of a tube into the steam gun
until the release button of the steam gun clicks into place (Fig.6). Add one, or two
extension tubes if required. Press in the appropriate release button and pull the
tubes apart with a downward movement to take the extension tube off again (Fig.7).
The floor nozzle is delivered with a separate connector.
Assemble the connector as illustrated. Attach the floor
nozzle to the end of the extension tube. Ensure that
the nozzle clicks into place on assembly (Fig.8).
09
The floor nozzle is ideal for cleaning washable wall and hard floor surfaces. It may
be used with or without the cleaning cloth. However, we recommend using the cloth
to protect sensitive surfaces such as wood or linoleum. Place the floor nozzle on the
cleaning cloth and secure the overhanging material under the cleaning cloth clips
on the left and right. Press on the inner sides of the holder, then open the clips and
the cleaning cloth can be secured in place (Fig.9). To take the floor nozzle off again,
press in the appropriate release button (see Fig.7), and pull the nozzle off with a
downward movement.
The Brio 220CC has a range of attachment nozzles to enable the most effective
and thorough cleaning of different surfaces. First assemble the accessory adaptor
so that these attachments can be connected to the steam cleaner hose. The
accessory adaptor can be attached directly to both the steam gun and the end of
one or more extension tubes.
Ensure that the adaptor is firmly pushed on until it clicks into place (Fig.10). Press
in the appropriate release button and pull apart with a downward movement to take
the adapter off again.
Simply push the jet nozzle firmly into the accessory adaptor to attach it (Fig.11). This
nozzle makes it possible to clean hard to reach places such as corners, joints and
toilets with ease. The jet nozzle may be removed by pulling it off with a downward
movement.
10
STARTING UP
The two brush attachments are pushed firmly onto the accessory adaptor.
Even the most stubborn dirt can be removed from a variety of surfaces using the
small nylon brush (Fig.12) The larger nylon brush, (Fig.13) is suitable for heavy
staining on less sensitive materials such as stainless steel or stone. The brush
nozzles are removed by simply pulling them off with a downward movement.
The 2-in-1 nozzle consists of a right—angled steam attachment onto which the win-
dow cleaner can be attached. Push the right—angled steam attachment firmly onto
the detail nozzle. Pull the cotton cover over the nozzle for more thorough cleaning
and to protect the work surface (Fig .14). Attach the rubber blade to tie right-
angled steam attachment if windows, mirrors or tiles are to be cleaned (Fig. 15).
CAUTION
Glass may crack if subjected to thermal shock! Pre-heat areas of glass prior to
steam cleaning by spraying steam in a wider arc from a distance of 20-25 cm.
Slowly reduce the distance to lO-l5 cm to heat the glass up further.
11
The 220CC has a built-in water tank holding 1.5 liters. The steam cleaner must
always be disconnected from the mains when filling or topping up with water.
Unscrew the tank cap (Fig. 16) by pressing the cap down and simultaneously
turning it counter-clockwise. Use the funnel and measuring jug supplied when
filling with water (Fig. 17).
CAUTION
Always test the steam cleaner first on inconspicuous or invisible areas of the
surfaces or fabrics to be cleaned to check their tolerance to hot steam.
Steam may result in bleaching of painted/varnished wood.
Steam may discolor shiny plastics.
Acrylic, velvet and linen react very sensitively to the temperature of steam
Do not use the steam cleaner on Dralon fibres without first having carried out
a suitability test on a concealed area. Reliable cannot be held responsible for
damage to objects, materials, people, animals or plants that occurs due to
unsuitable use of hot steam or due to improper use of the appliance.
Only fill with pure water without additives of any kind, e.g. perfume, cleaning
agents alcohol, as they could damage the machine and make it dangerous to use.
It is advisable to use distilled water to prevent limescale deposits if your water is
very hard.
CAUTION
Do not exceed the maximum quantity of 1.5 litres when filling the tank!
Screw the tank cap firmly back on by turning it clockwise under pressure.
Tip: The heating up time will be shortened if warm water is used when filling.
12
OPERATING THE BRIO
Plug the steam cleaner‘s plug into a proper installed socket and switch the
appliance on by pressing the On/Off switch (Fig.19).
The green operating pilot lamp and red heating pilot lamp (Fig.19) light up. The
operating pilot lamp lights up as soon as the 220CC has been plugged in and
switched on. The heating pilot lamp indicates that the steam cleaner is currently
heating up. The operating temperature is reached after approximately 8 minutes
and the red heating pilot lamp goes turns off the appliance is now ready for use.
WARNING
Never aim the steam outlet of the steam gun at people animals, plants or
electrical systems (e.g. oven or electric shock)!
Release the locking device (child-proof device) by pushing the black triangular pin
on the right—hand side of the steam gun towards the left.
NOTE
The Brio 220CC is fitted with an over-heating safety feature. The appliance
will switch off automatically on reaching a temperature of 180°C to prevent
overheating. Disconnect from the main immediately by removing the plug.
The appliance may be operated again after a 30-minute cooling period.
13
IMPORTANT
WHEN THE UNIT IS FIRST ACTIVATED, THERE MAY BE A SMALL AMOUNT
OF CONDENSATION BUILT-UP IN THE HOSE. BEFORE USE, HOLD THE STEAM
HEAD OVER A TOWEL OR INTO A SINK/TUB TO REMOVE ANY BUILT-UP
CONDENSATION. CLEANING IS NOW READY TO BEGIN.
Do not aim the steam outlet at one point too long. Loosen the dirt by moving the
steam jet backwards and forwards. The flow rate of the steam emitted can be
regulated by turning the steam controller. Turn the steam controller clockwise for
less steam and counter-clockwise for more steam (fig. 21).
Do not tip or tilt the appliance by more than 90° during use and ensure that the
appliance always stands on a firm base. One full tank is enough for a maximum of
50 minutes of use. Do not leave the machine unsupervised while switched on and if
necessary use the childproof lock to secure the steam switch. To do this, press the
triangular black pin on the left-hand side of the steam gun into the right.
WARNING
The housing and accessories become hot during operation! Allow the appliance
to cool down before changing the accessories. Never open the tank cap while the
steam cleaner is switched on as the tank is under pressure!
14
TOPPING UP WITH WATER
The tank must be topped up if the steam flow emitted starts to decrease. Switch
off the steam cleaner by pressing the On/Off switch. The green operating pilot
lamp goes off. Press the steam button on the steam gun to release the remaining
pressure and then lock the gun. Remove the main plug from the socket and allow
the appliance to cool down. Remove the tank cap by pressing it down and turning
it counter clockwise.
WARNING
Hot steam may escape on opening! There is a risk of burns from the cap thread
and the tank!
Top up with water using the measuring jug and funnel (see page 10, Filling the
Water Tank), then carefully close the tank cap again. The steam cleaner can now
be plugged in again and switched on. The 220CC is ready for use as soon as the
heating pilot lamp goes off.
When finished switch the appliance off. The green operating pilot lamp goes
off. Press the steam button on the steam gun (Fig.22) to release the remaining
pressure. Secure the steam gun by pushing the locking pin on the left—hand side
of the handle into the right. Remove the plug from the socket and allow the appli-
ance to cool down. Empty the water tank so that no deposits can settle (Fig. 23).
Do not close the water tank until it has dried out completely. The steam cleaner
must cool down completely before being put away. Store the appliance so that it is
out of the reach of children. The extension tube with assembled floor nozzle may
be inserted in the parking holder on the back of appliance for storage purposes or
for short breaks while working.
15
WARNING
Always ensure before cleaning or maintaining the steam cleaner that it is switched
off and unplugged from the main power supply.
Only clean the appliance by wiping over the housing with a lightly moistened cloth.
Do not use any cleaning agents, abrasives or alcohol since they may damage the
housing.
CLEANING AND MAINTENANCE
We recommend that the tank be rinsed out after 5 filling operations at the latest if
your water is hard. To rinse your steam cleaner start by adding water to the tank
and giving it a good shake to clean it, this will loosen any lime-scale that has been
deposited on the bottom of the steam cleaner.
The water tank should be treated with lime—scale remover approximately every 6
months to prolong the steam cleaner‘s life. Place one limescale removal packet in
1 litre of warm water and fill the water tank with it. Allow the solution to work for
approximately 30 minutes and then pour away the water with the dissolved solids.
Repeat this process if necessary and then rinse out the tank with water. Then pour
out the water and allow the tank to dry out completely before closing it.
DISPOSAL AFTER END OF USEFUL LIFE
If the appliance‘s useful life has come to an end, the appliance should be rendered
unusable by removing the plug from the socket and cutting off the power cable.
Please dispose of the appliance properly through your public waste authority.
16
TROUBLESHOOTING
If your Brio 220CC steam cleaner does not work well, check the following points:
PROBLEM CAUSE SOLUTION
The operating pilot
lamps fails to light up.
The appliance is neither
plugged into a socket nor
switched on.
The socket is faulty.
The power cable is
damaged.
Insert the plug into a
socket or switch the
appliance on.
Check the socket by
unplugging the steam
cleaner and plugging in a
different appliance.
Contact Reliable.
No steam is emitted
when the steam button is
operated.
The childproofing lock is
preventing release of the
steam button.
The water tank is empty.
Push the black pin on the
right hand side of the
steam gun to the left.
Only a very small amount
of steam flows.
The steam controller is
on minimum.
Turn the steam control-
ler counter-clockwise
until sufficient steam is
emitted.
The appliance takes a
very long time to heat
up.
The water tank has
calcium buildup.
Descale the water tank.
17
SPARE PARTS
All accessories such as the floor nozzle, acessory adaptor, nylon brush nozzle metal
brush nozzle may be ordereed subsequently as spare parts.
Part Number Description
220CCAFLBRUSH Floor brush with connector
220CCA2IN1WINDOW 2-in-1 attachment (including window wiper)
220CCAEXT Extension tubes
220CCANOZZLE Nozzle and accessory adapter
220CCA40N Circular nylon brushes (40mm)
220CCA25N Circular nylon brushes (25mm)
220CCA25B Circular brass brushes (25mm)
220CCACUP Measuring cup
220CCAFUNNEL Funnel
220CCACLOTH Cotton cover for window attachment
220CCAHOSE Hose assembly complete
220CCAJNOZZLE Jet nozzle
220CCACASE Carrying case for accessories
220CCAPAD Floor pad
18
Reliable Corporation (“Reliable”) warrants to the original purchaser of the boiler noted above
from Reliable (the “Reliable Boiler Tank”) that it will be free from defects in materials and
workmanship when utilized for normal use by the original purchaser only. Should the Reliable
Boiler Tank need replacement, Reliable will do so at no parts and labor cost to the original
purchaser, exclusive of shipping.
Subject to the conditions and limitations set forth below, Reliable will either repair or replace
any part of a Reliable Boiler Tank that proves defective by reason of improper workmanship
or materials. If the defective Reliable Boiler Tank is no longer available and cannot be repaired
effectively or replaced with an identical model, Reliable shall replace the defective Reliable
Boiler Tank with a current Reliable Boiler Tank of equal or greater value. Repaired parts or
replacement products will be provided by Reliable on an exchange basis, and will be either new
or refurbished to be functionally equivalent to new. If Reliable is unable to repair or replace a
Reliable Boiler Tank, it will refund the current value of that Reliable Boiler Tank at the time the
warranty claim is made.
This limited warranty does not cover any damage to a Reliable Boiler Tank that results from
improper installation, accident, abuse, misuse, unreasonable use, natural disaster, insufficient
or excessive electrical supply, abnormal mechanical or environmental conditions or any
unauthorized disassembly, repair or modification. This limited warranty does not extend to
any indirect, consequential or incidental damages that may be suffered by a user from the
use of a Reliable Boiler Tank, including without limitation, any liability for third party claims
for damage, and is limited to the amount paid by the original purchaser for the Reliable Boiler
Tank with respect to which this limited warranty protection applies. This limited warranty does
not apply with respect to products that have been altered or which are missing serial numbers
or for products not purchased directly from Reliable or a dealer authorized by Reliable to sell
the Reliable Boiler Tank.
This limited warranty is the only warranty that applies to the Reliable Boiler Tank, supersedes
any and all terms that may be contained in any other document or purchase order and may
not be altered or amended except expressly in writing by Reliable.
To obtain a repair or replacement under the terms of this warranty, please contact our
customer service group at 1 800 268 1649 or at support@reliablecorporation.com. You will be
required to submit an original receipt via fax or e-mail. The receipt must reflect that you are
the original purchaser, the product was bought directly from Reliable or from an authorized
Reliable dealer and that the warranty claim is being made in compliance with the terms set
out in this document or any subsequent document issued by Reliable in connection with this
policy. You will be issued a return authorization number (RA#) and asked to ship the defective
product together with proof of purchase and RA#, prepaid insured to the following address:
Reliable Corporation, 5–100 Wingold Ave, Toronto, ON M6B 4K7.
Freight collect shipments will be refused. The risk of loss or damage in transit will be borne
by the customer. Once Reliable receives the defective product, it will initiate the repair or
replacement process.
RELIABLE CORPORATION LIFETIME
PRODUCT WARRANTY POLICY FOR
PRESSURIZED STEAM BOILER TANKS
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58

Reliable Brio 220CC User manual

Category
Steam cleaners
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI