ANKO 42958352 User manual

Category
Learning toys
Type
User manual
LASER BALL
Keycode:42958352
Technical specification.
Batteries: 2X 1.5V AA (not included ).
Ball has an 15min timer feature. Press the button,
for the Ball to move forwards or backwards, the
ball also shoots out a laser light whilst moving.
Battery Installation & Set Up
1. Open the two sides cover.
2. Use a screwdriver to remove the screw on the battery
cover.
3. Insert 2 x 1.5V AA batteries (not included) and then
replace battery cover.
4. Use a screwdriver to lock the screw securely.
5. Close the two sides cover.
Warning
Do not aim the laser light directly into the eyes of pets
or people.
Pets should be supervised while playing with this
product.
Pet toy-Not intended for children.
It is the responsibility of the pet owner if this toy is
suitable for their pet’s style of play .
No pet toy is indestructible and can be damaged during
play.
For your pet’s safety, inspect regularly and remove if
damaged.
Always supervise your pet during play.
Batteries are to be inserted with the correct polarity.
Do not mix different types of batteries or new and used
batteries.
Non-rechargeable batteries are not to be recharged.
Rechargeable batteries are only to be charged under
adult supervision.
Rechargeable batteries are to be removed from the pet
toy before being charged.
The supply terminals are not to be short-circuited.
Remove batteries from the pet toy when not in use for
extended time or when batteries become exhausted.
Battery installation by adult required.
Dispose of batteries responsibly.
Do not dispose of in fire.
This product is classified as a Class 1 laser product and
contains a Diode laser <1mW.
The instruction manual must be retained since it contains
important information.
MADE IN CHINA
42-958-352
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

ANKO 42958352 User manual

Category
Learning toys
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI