Deko-light 730389 is a surface mounted wall lamp that is suitable for both indoor and outdoor use. It is designed to be installed outside of the hand's reach when used with incandescent bulbs. The lamp should only be operated on normal or non-flammable surfaces and must not be covered with objects or thermally insulating materials.
The lamp comes with a transformer and must be fully assembled with its protective cover before operation. It is recommended to use a residual current operated protective device for added safety.
In case of a faulty function, check if the lamp is switched on, the transformer is properly connected, the remote control (if available) is intact and has working batteries, and the connected lines are not damaged. If the lamp is still not functioning, the bulb may be defective and needs to be replaced.
Deko-light 730389 is a surface mounted wall lamp that is suitable for both indoor and outdoor use. It is designed to be installed outside of the hand's reach when used with incandescent bulbs. The lamp should only be operated on normal or non-flammable surfaces and must not be covered with objects or thermally insulating materials.
The lamp comes with a transformer and must be fully assembled with its protective cover before operation. It is recommended to use a residual current operated protective device for added safety.
In case of a faulty function, check if the lamp is switched on, the transformer is properly connected, the remote control (if available) is intact and has working batteries, and the connected lines are not damaged. If the lamp is still not functioning, the bulb may be defective and needs to be replaced.
Deko-light 730389 is a surface mounted wall lamp that is suitable for both indoor and outdoor use. It is designed to be installed outside of the hand's reach when used with incandescent bulbs. The lamp should only be operated on normal or non-flammable surfaces and must not be covered with objects or thermally insulating materials.
The lamp comes with a transformer and must be fully assembled with its protective cover before operation. It is recommended to use a residual current operated protective device for added safety.
In case of a faulty function, check if the lamp is switched on, the transformer is properly connected, the remote control (if available) is intact and has working batteries, and the connected lines are not damaged. If the lamp is still not functioning, the bulb may be defective and needs to be replaced.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI