Pottinger HIT HT 8680 Operating instructions

Brand: Pottinger

Model: HIT HT 8680

Category: Mini tillers

Type: Operating instructions

2060.en-US.80X.0

Original operating instructions

Tedder

HIT HT 8680

2060

Machine no.: +..00001

Technical changes

Since we are constantly working on the further development of our products, there may be

deviations between the product and this publication. Therefore, no claims can be derived

from the information, figures and descriptions. For binding information on the specific charac-

teristics of your machine, please contact your service dealer.

Legal information

Please note that only the German operating instructions are the original operating instruc-

tions within the meaning of Directive 2006/42/EC. Operating instructions that are available in

languages other than German are translations of the original German operating instructions.

Please understand that changes to the scope of delivery in terms of form, equipment and

technology are possible at any time.

Reprinting, translation and reproduction in any form, including excerpts, require the written

consent of PÖTTINGER Landtechnik GmbH.

All rights under copyright law are expressly reserved by PÖTTINGER Landtechnik GmbH.

MyPÖTTINGER – Easy. Anytime. Everywhere.

• Scan the QR code from the type plate with a smartphone / tablet or enter www.mypoet-

tinger.com on the Internet.

• Spare parts lists are available exclusively via MyPÖTTINGER.

• Individual information, such as operating instructions and maintenance information for

your machines, is available on MyPÖTTINGER in “My Machines” at any time after regis-

tration.

2 | Original operating instructions HIT HT 8680 2060.en-US.80X.0

Dear customer,

Quality is value that pays for itself. Therefore, we apply the highest quality standards to our

products, which are continuously monitored by our in-house quality management and by our

management. Because safety, flawless function, the highest quality and absolute reliability of

our machines in operation are our core competencies for which we stand.

These operating instructions are intended to facilitate getting to know your machine, and pro-

vide you with clear information on safe and proper handling, care and maintenance. There-

fore, please take some time to read the instructions.

These operating instructions are part of the machine. They must be kept in a suitable loca-

tion during the entire service life of the machine and must be accessible to personnel at all

times. Instructions on the basis of existing national regulations on accident prevention, traffic

regulations and environmental protection must be added.

All personnel charged with the operation, maintenance or transport of the machine must

have read and understood these instructions, in particular the safety instructions, before

starting work. Failure to follow these instructions will void the warranty.

If you have any questions regarding the contents of these operating instructions or any other

questions about this machine, please contact your PÖTTINGER service partner.

Timely and conscientious care and maintenance according the established maintenance in-

tervals will ensure operational and traffic safety as well as the reliability of your machine.

Only use original spare parts or spare parts and accessories approved by PÖTTINGER

Landtechnik GmbH. Only the original spare parts approved by us have been tested by us

and thus fulfill the suitable prerequisites for use in your machine. If unapproved parts are

used, the guarantee or warranty claim will be lost. Even after the warranty period has ex-

pired, we recommend using original spare parts to ensure the continuous performance of the

machine.

The product liability law obligates the manufacturer as well as the dealer to hand over in-

structions when selling machines and to train the customer on the machine by referring to the

safety, operating and maintenance instructions. A confirmation in the form of a delivery dec-

laration is required to prove that the machine and the instructions have been handed over

properly. The delivery declaration was enclosed with the machine at the time of delivery.

According to product liability law, every self-employed person and farmer is an entrepreneur.

Entrepreneurial property damage is therefore excluded from liability by PÖTTINGER accord-

ing to product liability law. Property damage within the meaning of product liability law is

damage caused by a machine, but not to it.

The operating instructions are part of the machine, therefore hand them over to the new own-

er when passing on the machine. Train the new owner, and refer the owner to the aforemen-

tioned instructions.

Your PÖTTINGER service team wishes you much success.

2060.en-US.80X.0 Original operating instructions HIT HT 8680 | 3

Presentation conventions

This section contains explanations for a better understanding of the figures, safety instruc-

tions, warnings and textual descriptions used in these operating instructions.

Safety instructions / warnings

Safety instructions of a general nature are always at the beginning of a section. They warn of

dangers that may arise during operation of the machine or during preparations for work on

the machine. Warnings warn of dangers that may arise immediately during a procedure or

work step on the machine. Warnings are listed together with the respective procedures /

work steps in the instructional text.

Safety instructions and warnings are presented as follows:

DANGER

If the instructions in a text section marked in this way are not followed, there is a risk

of fatal or life-threatening injury.

► Make sure to follow all instructions in such text sections!

WARNING

If the instructions in a text section marked in this way are not followed, there is a risk

of serious injury.

► Make sure to follow all instructions in such text sections!

CAUTION

If the instructions in a text section marked in this way are not followed, there is a risk

of injury.

► Make sure to follow all instructions in such text sections!

NOTICE

If the instructions in a text section marked in this way are not followed, there is a risk

of property damage.

► Make sure to follow all instructions in such text sections!

TIP

Text sections marked in this way contain recommendations and tips for handling the ma-

chine.

ENVIRONMENT

Text sections marked in this way contain information on the topic of environmental protec-

tion.

Directional information

Directional information (such as left, right, front, rear) is given based on the normal “working

direction of travel” of the machine.

4 | Original operating instructions HIT HT 8680 2060.en-US.80X.0

Orientation information for a figure of a machine detail, refers to this figure itself and is only

understood as relative to the direction of travel occasionally. The meaning of the orientation

information (if required), is clear from the accompanying text itself.

Designations

In these operating instructions, the existing interchangeable equipment for agricultural vehi-

cles (according to European Directive 2006/42/EC) is referred to as the machine.

Vehicles intended for driving the existing machine are referred to as tractors.

Equipment designated as optional is only offered on certain machine versions or only in cer-

tain countries.

Cross-references

Cross-references to another place in the operating instructions or another document are in

the text, with specification of the chapter and subchapter or section. The name of the sub-

chapter or section is in quotation marks. (Example: Check all screws on the machine for

tightness. See “Tightening torques” on page xxx.) The subchapter or section can also be

found in the document via an entry in the table of contents.

Action steps

An arrow or sequential numbering indicates action steps that should be performed.

A black-bordered indented arrow or sequential indented numbering indicates intermedi-

ate results or intermediate steps that should be performed.

Figures

Figures may differ in detail from your machine and are to be understood as a schematic dia-

gram/symbolic illustration.

Use of colors

Figures in this printed document are shown exclusively in grayscale or black and white.

Figures in electronically distributable documents (PDF) are also displayed in color and can

be printed in color if required.

Use of symbols

Figures may contain additional inserted symbols, arrows and other lines that are used to im-

prove the comprehensibility of the image content, or are intended to draw attention to a spe-

cific area of the image.

2060.en-US.80X.0 Original operating instructions HIT HT 8680 | 5

Product delivery instructions

Please check the points listed according to the product liability obligation.

Please mark with a cross where applicable.

Machine checked according to delivery note. All enclosed parts removed; all safety

equipment, cardan shaft and operating equipment present.

Operation, commissioning and maintenance of the machine or device discussed

and clarified with the customer based on the operating instructions.

Tires checked for correct air pressure.

Wheel nuts checked for tight fit.

Correct PTO shaft speed and direction of rotation pointed out.

Adjustment to the tractor performed; three-point adjustment, drawbar height, hand-

brake lever attachment in the tractor cab, forced steering linkage adjusted, compati-

bility of all required electrical, hydraulic and pneumatic plug connections to the trac-

tor checked and established.

Cardan shaft correctly cut to length.

Test run of all machine functions as well as parking brake and service brake per-

formed and no defects found.

Function explanation during test run.

Swinging into transport and working position explained.

Information about desired or additional equipment given.

Information on required reading of the operating instructions given.

A confirmation is required to prove that the machine and the operating instructions have

been handed over properly. For this purpose, you have received a confirmation email from

PÖTTINGER. If you have not received this email, please contact your local dealer. Your

dealer can fill out the delivery declaration online.

Austria

PÖTTINGER Landtechnik GmbH

Industriegelände 1

4710 Grieskirchen

Phone+43 7248 600-0

Fax+43 7248 600-2513

[email protected]

6 | Original operating instructions HIT HT 8680 2060.en-US.80X.0

Change index

Date Index Reason for change Changed chapter

2060.en-US.80X.0 Original operating instructions HIT HT 8680 | 7

Screw tightening torques factory standard

Screw tightening torques................................................................................................... 12

Design and function

Included accessories......................................................................................................... 13

Retrofit program................................................................................................................ 13

At a glance

Labeling............................................................................................................................. 14

Type plate.................................................................................................................... 14

Functional elements.................................................................................................... 15

Description

EU - Declaration of Conformity......................................................................................... 17

Intended use..................................................................................................................... 18

Improper use..................................................................................................................... 18

Technical data................................................................................................................... 18

Tires and load capacity index...................................................................................... 20

Safety and environment

Safety instructions............................................................................................................. 21

Qualification of the personnel............................................................................................ 21

Performing maintenance work.......................................................................................... 21

Organizational measures.................................................................................................. 21

Ensuring operational safety............................................................................................... 22

Special dangers................................................................................................................ 23

Warning signs................................................................................................................... 24

Operational danger zone................................................................................................... 27

Traffic safety equipment.................................................................................................... 29

Support leg operation........................................................................................................ 32

Disposal of the machine.................................................................................................... 35

Transport locks

Activating / assembling / checking the transport locks...................................................... 36

Content

8 | Original operating instructions HIT HT 8680 2060.en-US.80X.0

Control terminal operation

BASIC CONTROL............................................................................................................. 39

Hydraulic preselection control (optional)..................................................................... 39

Operation

Tractor ballasting............................................................................................................... 41

Determining the tractor ballasting through the weighing method................................ 42

Determining the tractor ballasting through calculation................................................. 44

Setting / conversion........................................................................................................... 45

Prerequisites for commissioning a cardan shaft.......................................................... 46

Activating the night swath gear.................................................................................... 48

Setting the rotor angle................................................................................................. 49

Adjusting the tine angle............................................................................................... 50

Working depth............................................................................................................. 52

Guide value display of the working depth......................................................................... 54

Coupling............................................................................................................................ 55

Commissioning............................................................................................................ 55

Connecting the hydraulic hoses.................................................................................. 56

Connecting the cables................................................................................................. 56

Connecting the preselection control (optional)............................................................ 57

Coupling the machine to the tractor............................................................................. 57

Coupling the cardan shaft............................................................................................ 60

Starting work..................................................................................................................... 62

Cardan shaft permissible joint angles.......................................................................... 63

Transport journey........................................................................................................ 64

Establishing the headland position from the road transport position........................... 65

Establishing the working position from the headland position..................................... 67

Fenceline tedding (field edge clearing)........................................................................ 68

Usage.......................................................................................................................... 71

Establishing the headland position from the working position..................................... 73

Establishing the road transport position from the headland position........................... 75

Uncoupling........................................................................................................................ 76

Parking the machine.................................................................................................... 76

Disconnecting the preselection control (optional)........................................................ 78

Decommissioning the machine at the end of the season.................................................. 78

Content

2060.en-US.80X.0 Original operating instructions HIT HT 8680 | 9

Maintenance

Maintaining operational readiness.................................................................................... 79

General notes.................................................................................................................... 79

Jack lifting points............................................................................................................... 80

Cardan shaft...................................................................................................................... 81

Condition-based maintenance

Tine change...................................................................................................................... 83

Predetermined maintenance

Before each season.......................................................................................................... 84

Checking the cardan shaft cam clutch......................................................................... 84

Checking the friction clutch.......................................................................................... 84

Daily maintenance............................................................................................................. 85

Checking the hydraulic system.................................................................................... 85

Checking / replacing lighting bulbs.............................................................................. 86

Checking / replacing warning signs, warning triangles, warning foils.......................... 86

Checking / correcting the tire pressure........................................................................ 87

Once after 8 hours............................................................................................................ 88

Checking/tightening all screw connections.................................................................. 88

First after 10 hours, after first load run when tires are changed, then every 500 hours.... 89

Tightening the wheel nuts............................................................................................ 89

Every 50 hours.................................................................................................................. 89

Lubricating the cardan shafts...................................................................................... 89

Lubricating the fenceline tedding system.................................................................... 90

After each season (winter storage)................................................................................... 91

Changing the input gearbox oil.................................................................................... 92

Cleaning / preserving the machine.............................................................................. 93

Every 6 years.................................................................................................................... 94

Replacing the hydraulic hoses..................................................................................... 94

Lubrication schedule......................................................................................................... 94

Operating fluids

Operating fluid specification.............................................................................................. 96

Operating fluids and fill quantities..................................................................................... 96

Content

10 | Original operating instructions HIT HT 8680 2060.en-US.80X.0

Advice and support

Lighting.............................................................................................................................. 97

Repairing punctures on rotor units.................................................................................... 97

Cardan shaft cam clutch function...................................................................................... 99

Hydraulic system emergency operation (optional with preselection control).................... 99

Hydraulic system............................................................................................................... 101

Hydraulic plan.............................................................................................................. 101

Hydraulic plan with fenceline tedding adjustment........................................................ 102

Hydraulic plan with height adjustment and fenceline tedding adjustment................... 103

Supplement to the USA / CANADA operating instructions

USA / CANADA English warning signs............................................................................. 104

Safely towing loads........................................................................................................... 109

Content

2060.en-US.80X.0 Original operating instructions HIT HT 8680 | 11

Screw tightening torques

This factory standard applies to all metric screws for which no special tightening torque is

specified in the drawing/instructions. The respective strength class can be seen on the screw

head.

• The values specified are nominal values and apply to a head friction coefficient of

IJ=0.14 and a thread friction of IJ=0.125. Slight deviations of the clamping force due to

different friction coefficients may occur. The values listed must be observed with a toler-

ance of ± 10%.

• If the specified tightening torques are used and the friction coefficients used are present,

the screw material is stressed to 90% of the minimum yield strength according to DIN

ISO 898.

• If a special tightening torque is specified for a screw connection, all of these screw con-

nections must be tightened with a torque wrench and the specified tightening torque.

Metric thread Strength class 8.8 Strength class 10.9

Tightening torque Clamping force Tightening torque Clamping force

M 4 3,1 Nm 4000 N 4,4 Nm 5700 N

M 5 6,2 Nm 6600 N 8,7 Nm 9300 N

M 6 10,5 Nm 9300 N 15 Nm 13000 N

M 8 25 Nm 17000 N 36 Nm 24000 N

M 10 50 Nm 27000 N 70 Nm 38000 N

M 12 86 Nm 39500 N 121 Nm 56000 N

M 14 135 Nm 54000 N 195 Nm 76000 N

M 16 215 Nm 75000 N 300 Nm 105000 N

M 20 410 Nm 117000 N 580 Nm 164000 N

M 24 710 Nm 168000 N 1000 Nm 237000 N

M 30 1400 Nm 270000 N 2000 Nm 380000 N

M 8 x 1 27 Nm 18700 N 38 Nm 26500 N

M 10 x 1.25 53 Nm 29000 N 74 Nm 41000 N

M 12 x 1.25 95 Nm 44500 N 130 Nm 63000 N

M 14 x 1.5 150 Nm 60000 N 210 Nm 85000 N

M 16 x 1.5 230 Nm 81000 N 320 Nm 115000 N

M 20 x 1.5 460 Nm 134000 N 650 Nm 189000 N

M 24 x 2 780 Nm 188000 N 1090 Nm 265000 N

Screw tightening torques factory standard

12 | Original operating instructions HIT HT 8680 2060.en-US.80X.0

Included accessories

• Operating instructions, spare parts list and delivery declaration.

• Various tools

Retrofit program

The retrofit program of PÖTTINGER Landtechnik GmbH offers a wide range of retrofit op-

tions. Your service dealer will be pleased to provide you with further information.

Design and function

2060.en-US.80X.0 Original operating instructions HIT HT 8680 | 13

Labeling

Type plate

1 = Type plate position

Type plate

Before an inquiry about the machine or technical issues, read the model and type from the

type plate and have it ready. Chassis no. and/or serial no. are absolutely necessary for or-

dering spare parts.

CE mark

The CE mark on the type plate confirms the conformity of the machine with the provisions of

the machinery directive (version valid at the time the machine was placed on the market).

Data included

The following data can be read on the type plate, depending on the machine type and de-

sign.

Data Data

Chassis number Year of manufacture

Model Model year

Vehicle identification number Axle loads per axle

Type Drawbar load

Serial number Permissible total weight

Base weight

At a glance

14 | Original operating instructions HIT HT 8680 2060.en-US.80X.0

Functional elements

Name and function

Pos. Name Function

1 Rear warning

signs with light-

ing

Warning device for other road users when driving on public

traffic areas.

2 Chassis Machine in headland position and road transport position.

3 Side guard Prevents approach to the machine in working position and road

transport position.

4 Hydraulic cylin-

der

Start up of headland position, working position and road trans-

port position.

5 Spare wheel Spare wheel for punctures.

6 Front warning

sign with lighting

Warning device for other road users when driving on public

traffic areas.

7 Tine guard Protective cover for the tine tips during transport journeys.

8 Headstock/

drawbar

Optional lower linkage attachment or attachment to the tractor

by means of drawbar eye/ball coupling.

Drawbars with drawbar eye/ball coupling can be rotated and

optionally assembled for either top or bottom attachment.

Pos. Name Function

9 Hand crank Setting the working depth for all rotors.

At a glance

2060.en-US.80X.0 Original operating instructions HIT HT 8680 | 15

Pos. Name Function

10 Hydraulic cylin-

der

Raising the boom into headland position and folding the boom

into road transport position.

Pos. Name Function

11 Fenceline ted-

ding system

Folding the outer rotor back.

12 Wheel bracket

Winding protec-

tion (option with-

out figure)

Adjustable wheel carrier of the rotor units for setting the rotor

angle.

Winding protection is available from PÖTTINGER to prevent

fodder accumulation on the wheel brackets.

13 Protective

bracket

Prevents approach to the machine in the direction of travel in

working position.

At a glance

16 | Original operating instructions HIT HT 8680 2060.en-US.80X.0

EU - Declaration of Conformity

Description

2060.en-US.80X.0 Original operating instructions HIT HT 8680 | 17

Intended use

• The machine is intended exclusively for normal use in agricultural work. It is used for

tedding, turning and swathing of already mown fodder, roughage, wilted silage and

straw lying on the ground.

• When used as intended, no other person is present besides the operator/user of the ma-

chine. The presence of a second person is only permitted for training purposes.

• Intended use also includes following all contents of these instructions and observing the

warning signs (pictograms) on the machine.

Improper use

The following uses of the machine will void the manufacturer's warranty

• Operation of the machine by more than one person at the same time. The presence of a

second person during operation of the machine is only permitted for training purposes.

• Processing of surfaces that have not been mowed beforehand.

• Processing of surfaces that consist completely or partially of sand, stone or asphalt.

• Keeping animals on the machine.

• Immersion in liquids during transport, operation or storage of the machine.

Technical data

Designation HIT HT 8680 (type 2060)

Machine width in working position 8,80 m

Working width 8,60 m

Transport width - folded up 2,85 m

Parking height 2,60 m

Transport height (with largest tires) 2,60 m

Number of rotors 8

Tine arms per rotor 6

Rotor diameter 1,42 m

Required tractor power 44 kW

Max. PTO shaft speed 540 U/min

Recommended PTO shaft speed 380 U/min - 480 U/min

Tires on the two inner rotors / air

pressure

16/9.50-8

2,0 bar

Tires on the outer rotors / air pres-

sure

16/6.50-8

1,5 bar

Description

18 | Original operating instructions HIT HT 8680 2060.en-US.80X.0

Designation HIT HT 8680 (type 2060)

Tires on the chassis / air pressure 260/70 R15 - Air pressure and load capacity, see load

capacity index

340/55 R16 - Air pressure and load capacity, see load

capacity index

Maximum design speed 50 km/h

Weight with drawbar 1820 kg

Weight with lower linkage attach-

ment

2140 kg

Continuous sound pressure level < 70 dB(A)

Hydraulic connections and operat-

ing pressures

1 double-acting hydraulic plug connection

Min. operating pressure: 150 bar max. operating

pressure: 200 bar

1 single-acting hydraulic plug connection

Min. operating pressure: 150 bar max. operating

pressure: 200 bar

Electrical connections 7-pole connection for the lighting equipment (12 V

NOTICE

Damage to the hydraulic system due to incompatible hydraulic oils!

► Do not mix mineral oils with bio-oils!

► Check hydraulic oil compatibility before connecting the machine to the tractor.

Operator terminal

Operator terminal voltage 11 V DC - 16 V DC; 2-pole plug

Operator terminal current consumption max. 8 A

Operator terminal protection class IP65

Operator terminal protection FKS flat fuse Mini 75 A built into the plug

Operator terminal connection to the machine 4-pole plug

Description

2060.en-US.80X.0 Original operating instructions HIT HT 8680 | 19

Tires and load capacity index

Tire designation 260/70-R15

Load index 122 A8

Rims 9.00

Tire width 10.6299 in.

Tire outer diameter 29.72435 in.

Static radius 13.58265 in.

Rolling circumference (calculated) 89.7636 in.

Load capacity index 260/70-R15

Tire

pres-

sure

14.5038 psi 203.0532 psi 261.0684 psi 319.0836 psi 377.0988 psi 435.114 psi 464.1216 psi 580.152 psi Speed

Load

capaci-

ty per

tire

1951.0887 lbs 2447.1282 lbs 2932.1446 lbs 3417.161 lbs 3902.1774 lbs 4387.1938 lbs 4629.702 lbs 5621.781 lbs 6.2137 mph

1664.4881 lbs 2072.3428 lbs 2491.2206 lbs 2910.0984 lbs 3328.9762 lbs 3725.8078 lbs 3946.2698 lbs 4761.9792 lbs 15.53425 mph

1565.2802 lbs 1951.0887 lbs 2336.8972 lbs 2733.7288 lbs 3130.5604 lbs 3505.3458 lbs 3703.7616 lbs 4497.4248 lbs 18.6411 mph

1741.6498 lbs 2094.389 lbs 2447.1282 lbs 2777.8212 lbs 3130.5604 lbs 3306.93 lbs 4012.4084 lbs 24.8548 mph

1884.9501 lbs 2193.5969 lbs 2513.2668 lbs 2821.9136 lbs 2976.237 lbs 3615.5768 lbs 31.0685 mph

Tire designation 340/55-R16

Load index 133 A8

Rims 11

Tire width 13.58265 in.

Tire outer diameter 30.7086 in.

Static radius 14.37005 in.

Rolling circumference (calculated) 92.9132 in.

Load capacity index 340/55-R16

Tire

pres-

sure

14.5038 psi 203.0532 psi 261.0684 psi 319.0836 psi 377.0988 psi 435.114 psi 464.1216 psi 580.152 psi Speed

Load

capaci-

ty per

tire

2866.006 lbs 3505.3458 lbs 4122.6394 lbs 4761.9792 lbs 5401.319 lbs 6040.6588 lbs 6349.3056 lbs 7627.9852 lbs 6.2137 mph

2425.082 lbs 2976.237 lbs 3505.3458 lbs 4056.5008 lbs 4585.6096 lbs 5136.7646 lbs 5401.319 lbs 6481.5828 lbs 12.4274 mph

2292.8048 lbs 2799.8674 lbs 3306.93 lbs 3813.9926 lbs 4321.0552 lbs 4828.1178 lbs 5092.6722 lbs 6106.7974 lbs 18.6411 mph

2491.2206 lbs 2954.1908 lbs 3395.1148 lbs 3858.085 lbs 4321.0552 lbs 4541.5172 lbs 5445.4114 lbs 24.8548 mph

2667.5902 lbs 3064.4218 lbs 3483.2996 lbs 3880.1312 lbs 4078.547 lbs 4894.2564 lbs 31.0685 mph

Description

20 | Original operating instructions HIT HT 8680 2060.en-US.80X.0

Page is loading ...

Pottinger HIT HT 8680 Operating instructions

Brand: Pottinger

Model: HIT HT 8680

Category: Mini tillers

Type: Operating instructions

Download PDF

report

Pottinger HIT HT 8680 Operating instructions

Pottinger HIT HT 8680 Operating instructions

Related papers

Other documents