2. C.E. Niehoff & Co
  3. A10-135 Pulley Tool

C.E. Niehoff & Co A10-135 Pulley Tool Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the C.E. Niehoff & Co A10-135 Pulley Tool Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
II0077B
Page 1 of 1
Pulley Tool for
CEN Alternators
Instructions
C. E. Niehoff & Co. • 2021 Lee Street • Evanston, IL 60202 Tech Services Hotline 800-643-4633
Breaker Bar
Torque wrench
T
T
Hardware
T
Figure 1 — Pulley Tool
Pulley Tool
T
Pulley
T
Alternator
T
How to Use Pulley Tool
1. Install pulley on alternator shaft. Fasten with hardened washer and pulley nut.
2. Place pulley nut torque tool on top of pulley and snugly fasten hardware sized specifically for the holes in the
pulley.
3. Hold pulley tool in position with breaker bar.
4. Tighten pulley nut to torque specified by alternator model number.
5. Remove hardware and pulley tool after pulley nut is tightened.
/