2. Miele
  3. H 7260 BP

Miele H 7260 BP Owner's manual

  • Hello, I have reviewed the instructions for creating the Linear Fillet. This document guides you through cutting the rails, applying edging, and assembling the fillet with screws. It also specifies dimensions for 16mm and 19mm fillet options. I'm ready to answer any questions you may have about the instructions.
  • What material is used to make the fillet?
    Is it necessary to apply edging?
    What type of screws should be used for assembly?
Follow the information below for how to create the FH base linear fillet using a 150mm FH door
Cut the rails from each side of the door
Note: Ensure cut is square. Cut from back to front edge.
Edging should be applied to the back cut edge of section ‘A’.
For 16mm Fillet
(Greenwich - Gloss & Super Matt)
54mm
54mm
16mm
22mm
22mm
224mm
224mm
224mm
4x40mm csk
x4
edging
54mm
38mm
Linear Fillet
Builder fit option
HD912111
LEAFLINFIL
1
Assemble the fillet using screws to secure.
Note: Pilot drill holes before fixing.
2
For 19mm Fillet
(Chelford)
54mm 35mm
19mm
54mm
54mm
AAA BA B
BB
AA
BB
edging
/