The ultimate in discreet
tuning, the Micro Clip-Free
Tuner features a full-color
display with four selectable
viewing angles (2 vertical, 2
horizontal) in an attractive,
compact design. The included
clip-free mount attaches directly
to your instrument’s tuning
machine (screws included)
so your tuner is always at hand
and visible only to you.
1. Attach tuner to included mount
using the keyhole interlock.
2. Remove screw from instrument’s
tuning machine of your choice.
3. Align tuner mount with tuning
machine’s screw holes.
4. Use one of the included screws to
secure mount to tuning machine
(match diameter of original screw, two
sizes included). Do not over tighten.
5. Rotate tuner for best viewing angle.
INSTRUCTIONS:
Orientation Button:
Scroll through four
viewing angles.
Power Button: Toggle
tuner on and off. Tuner
automatically powers
off after 10 minutes.
Cursor Buttons:
Adjust tuner calibration
from 410 to 480Hz.
Vertical View
sharp
flat
in tune
Horizontal View
sharpflat in tune
MICRO CLIP-FREE TUNER
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
TC Electronic 3 Ultra Compact Polyphonic Tuner User manual
-
TC Electronic POLYTUNE 3 User manual
-
TC Electronic POLYTUNE 2 Owner's manual
-
TC Electronic PolyTune Clip Manual Manual
-
-
SABINE NEXTUNE Operating instructions
-
Avid Mbox User manual
-
Avid Technology Mbox User manual
-
-