EN
Owner’s manual20
REPLACING SHAVING HEAD
Notes:
• It is recommended to replace shaving head every 18 months.
• Replace damaged shaving blades immediately.
• Always replace the shaving head with the original Teesa shaving head.
• Shaving head is available to be bought from the online store Teesa.pl or rebelelectro.com.
1. Make sure the appliance is turned o and disconnected from power supply.
2. Press the shaving head release button to open the shaving head.
3. Pull the shaving head o the appliance.
4. Insert the lug of the new shaving head into the slot in the top of the appliance. Close
the shaving head.
Note: If the shaving head does not close smoothly, check if you have inserted the
shaving blades properly and if the retaining frame is locked.
SPECIFICATIONS
Main features
Three oating blades adjusting to all face shapes
Built-in pop-up trimmer perfect for trimming sideburns and moustache
High-quality steel blades
Cordless use
Quiet operation
Easy to clean
Ergonomic design
Technical data
Protection class: IPX6
Rotation speed: 7200 rpm
Run time: up to 45 min
Charging time: up to 8 h
Battery: 2x AA 600 mAh Ni-MH
Power: 3 W
AC adapter:
Input: 100 - 240 V; 50/60 Hz
Output: 3 V; 800 mA
In set
AC adapter, protective cap, cleaning brush, user manual
Physical parameters
Weight: 185 g
Dimensions: 57 x 157 x 59 mm