Premier Mounts UFP-1065 User manual

Category
Wall & ceiling mounts accessories
Type
User manual
Extension Adapter Plates for 40˝ to 65˝ Flat Panels
Model: UFP-1065
5/16 Flat Washers (Qty 4)
M8 Nyloc Nuts (Qty 4)
Extension Adapter Plates
(Qty 4)
Refer to the following instructions of your specifi c
mount for details on the following:
Griplate™ Washer Installation
Universal Spacer Installation
The extension adapter plates may be used with
mounting patterns ranging from 200mm x 200mm to
650mm x 840mm.
Adapter Plate Installation
Attach the extension adapter plates to the fl at panel using
four mounting screws and four (4) Griplate™ washers.
Step 1
Step 2
1) Place the universal bracket arms over the threaded
mounting studs that are on the adapter plate.
2) Place one (1) 5/16 washer and one (1) M8 nyloc nut
on each threaded mount stud.
3) Use a socket wrench and ½ socket to tighten all
M8 nyloc nuts.
4) Use a screwdriver and tighten the mounting screws.
Make certain that the two alignment stubs on each
adapter plate are properly seated in the universal
bracket slots. The alignment stubs help keep
the universal bracket assembly aligned and level
during installation.
Page 1 Visit Premier Mounts website at http://www.premiermounts.com Installation Instructions
9531-005-011-01
Do not tighten the mounting hardware at this time.
Do not overtighten the mounting screws.
Mounting Screw
Griplate Washer
M10 x 30mm Screws (Qty 4)
Parts List
Universal Bracket
Adapter Plate
Mount Stub
Alignment Stub
CREATING POSITIVE CUSTOMER EXPERIENCES
If M10 x 30mm mounting screws are needed for your
installation, Griplate™ washers cannot be used.
Please use the four (4) 5/16 at washers (supplied)
with the M10 x 30mm screws to attach the adapter
plates to the fl at panel.
  • Page 1 1

Premier Mounts UFP-1065 User manual

Category
Wall & ceiling mounts accessories
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI