Thermo Fisher Scientific Polysine™ Operating instructions

Brand
Thermo Fisher Scientific
Model
Polysine™
Type
Operating instructions
• Float 2 to 5 micron thick tissue sections on a pre-heated distilled water bath.
Do not add glue or subbing solution to the bath. Polysine™ slides eliminate
the need for these compounds. (Note: You may try substituting tap water for
distilled water. However, if you begin losing tissue sections, use only distilled
water.)
• Mount your tissue sections carefully. Tissue bonding begins quickly on Polysi-
ne™ slides. Tissue can be repositioned for approximately the first minute, but
thereafter the bonding occurs rapidly and thoroughly.
• Dry slides completely at room temperature by vertically draining them before
heating them in an oven. A microwave oven can also be used for quick adhesi-
on, once the tissue sections are thoroughly dried.
thermoscientifi c.com
Slides & Specialty Glass
Tel. +49 (0) 531 59 00 80
Fax +49 (0) 531 50 97 99
menzel.marketing@thermofi sher.com
© 2015 Thermo Fisher Scientifi c Inc. All rights reserved. All trademarks are the property of
Thermo Fisher Scientifi c Inc. and its subsidiaries.
Thermo Fisher Scientifi c
Gerhard Menzel B.V. & Co. KG
Saarbrückener Straße 248
38116 Braunschweig, Germany
Polysine™
Instructions For Use
thermoscientifi c.com
Slides & Specialty Glass
Tel. +49 (0) 531 59 00 80
Fax +49 (0) 531 50 97 99
menzel.marketing@thermofi sher.com
© 2015 Thermo Fisher Scientifi c Inc. All rights reserved. All trademarks are the property of
Thermo Fisher Scientifi c Inc. and its subsidiaries.
Thermo Fisher Scientifi c
Gerhard Menzel B.V. & Co. KG
Saarbrückener Straße 248
38116 Braunschweig, Germany
  • Page 1 1

Thermo Fisher Scientific Polysine™ Operating instructions

Brand
Thermo Fisher Scientific
Model
Polysine™
Type
Operating instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents