Zhurui PR10-E User manual

Brand: Zhurui

Model: PR10-E

Type: User manual

Zhurui PR10-E is a power recorder that can measure and monitor power consumption of household appliances, factory equipment, and office devices. It displays various electrical parameters such as voltage, current, power, power factor, and frequency on its 2.4-inch TFT color LCD screen. The device can also record historical data, set alarms and timers, and protect against output overloads. With its compact size and multiple plug and socket options, the Zhurui PR10-E is a versatile tool for measuring and managing electricity consumption.

ZHURUI

User Manual

PR10-E

Power

Recorder

Shenzhen Zhurui Technology Co.,Ltd.

ZHURUI

Shenzhen Zhurui Technology Co.,Ltd.

2 / 13

Thank you for purchasing this ZHURUI "PR10 Power Recorder". To get the

maximum performance from the unit, please read this manual first, and keep this at

hand.

Packing Lists

1.PR10 Power Recorder ………………………………………………………………………………………………………………1 Set

2.User Manual ……………………………………………………………………………………………………………………1 Copy

3.Warranty Card …………………………………………………………………………………………………………………1 Copy

4.Product Certification ……………………………………………………………………………………………………………1 Copy

If the machine fails, do not open the machine and

replace the parts

yourself, so as to avoid electric shock

accident.

There is no replace parts inside of this

machine

. Please contact the manufacturer or

authorized dealer after failure.

The manufacturer

disclaims all

responsibility for any accident or injury.

ZHURUI

Shenzhen Zhurui Technology Co.,Ltd.

3 / 13

Product Overview

PR10 Power Recorder is displayed by 2.4 inch TFT color LCD, and it can measuring a variety of electrical equipment ’s power, power factor, voltage, current,

frequency, accumulated electricity consumption, accumulated electricity bill, accumulated electricity time, one shot electricity consumption, one shot electricity

bill and one shot electricity time. Daily use of electricity and electricity bill will be recorded, you can see the form of a chart or list of historical records. PR10 is

suitable for the measuring and monitor power consumption of the household, factory, office and other cases, and can be used to power on or power off a

various electric equipment according your setting.

Main Features:

 The full digital operation and control.

 2.4 - inch true color TFT LCD display.

 0.5FS - level measuring accuracy.

 8 Languages UI can freely to be chosen.

 23 currency units can be set freely.

 Four operation keys.

 Date and time can be set, 5 date formats are supported.

 After power on, the outlet can be set to automatic power on, no electricity, or maintain the working state of the last working.

 Power statistics have two types: cumulative electricity and one shot electricity, one shot electricity can be cleared, it is convenient for the

measurement of electric charges in specific situations.

 There are three main display pages: the overview page, the one shot electrical page and real-time electrical parameters page, the default page is

overview page, users can press “”key to switch different display page;

 Automatic record historical data, which can be review in the form of a list or chart, and can be stored for up to 30 years.

 Charge rates can be set up to 4 decimal places, the number of decimal places can be adjusted freely, support 8 time sections of sub billing function,

can be easily used for peak load billing occasions.

 There are 9 timers, two are advanced timers, which can be set to power on or power off the power supply in the specific time on “no repeated”,

“everyday ”, “working day” or “weekend”, and other 7 timers are general timers can be set to open or close the power supply on the certain period

of time in one day.

 It has alarm function and can be set to alarm when the voltage, current, power or temperature exceeds alarm settings.

 It has output protection function and can be set to cut off the power supply when the voltage, current, power or temperature exceeds output

protection value. The “Launch overload” mode can be set when the current is 2A or above. No current and power are detected whether exceeds

the setting or not within 15 seconds when the “Launch overload” is checked. It also has automatic recovery function. When “Auto Recovery ” is

checked, if the machine is in output protection mode, 1 minutes later the power supply will be turned on automatically, if the power, voltage,

current or temperature exceed the output protection value, it will restart the output protection again, and the power supply will not powered on.

 Energy-saving setting: it can be set to turn off the screen automatically without operation in 1 minute, 5 minutes or 10 minutes, it also can be set

not to turn off the screen. The measurement function continues after the screen is closed, press any key to turn on the screen.

 The total power consumption and historical records can be cleared or do the factory restore in the system setting page.

 Power resolution switch automatically according to the measurement results, when less than 100W it display two decimal places, when greater

than 100W it display one decimal, when greater than 1000W there’s no decimal display.

 Over range hint.

 6 different forms of plug and socket optional, respectively, for the new GB 10A, GB 16A, EU 16A, FR 16A, American 15A, BS 13A.

 Small size, beautiful appearance, easy to carry, suitable for all kinds of electrical equipment for measurement.

Function Lists

Function Function Function

Power Measuring ● Time and Date Display ● 2

Advanced Timers ●

Voltage Measuring ● Five Date Format ● 7 General Timers ●

Current Measuring ● History Record ● Time and Date Setting ●

ZHURUI

Shenzhen Zhurui Technology Co.,Ltd.

4 / 13

Power Factor Measuring ● Record View by Annual Charts ● Alarm ●

Frequency Measuring ● Record View by Annual Lists ● Output Protect ●

Accumulated Electricity Consumption ● Record View by Monthly Charts ● Switch State Can Be Setting ●

Accumulated Electricity Bill ● Record View by Monthly Lists ● Screen Power Saving ●

Accumulated Electricity Time ● Charge Rate Setting ● History Record Clearing ●

One Shot Electricity Consumption ● Segment Charging Function ● Accumulated Electricity Clearing ●

One Shot Electricity Bill ● 8 Languages ● Factory Reset ●

One Shot Electricity Time ● 23 Currency Units ● Help ●

●supported Functions

Technical index

Electrical parameter measurement

Parameter Measure range Resolution Measuring accuracy

Voltage AC85~265v[1] 0.1v ±(0.5FS+0.1v)

Power 0.1~3750w[2] 0.01w[3] ±(0.5FS+0.01w) [3]

Current 0.005~15A[1] 0.001A ±(0.5FS+0.001A)

Power factor 0~1.000 0.001 ±(0.5FS+0.001)

Frequency 45~65Hz 0.1Hz ±(0.5FS+0.1Hz)

Electricity bill 0~999999 0.01 [4] ±(0.5FS+0.01) [4]

Electricity consumption 0~999999kwh 0.00001kwh[5] ±(0.5FS+0.00001kwh) [5]

Note: [1].Voltage and current measurements are true rms value;

[2].Power measurement is active power;

[3].If power <100w, the resolution is 0.01w, the measuring accuracy is

(0.5FS+0.01w),power>100w, the resolution is 0.1w, the measuring accuracy is

(0.5FS+0.1w),the power> 1000w, the resolution is 1w, the measuring accuracy

(0.5FS+1w);

[4].If Electricity bill<10000,the resolution is 0.01, the measuring accuracy is

(0.5FS+0.01), Electricity bill >=10000, the resolution is 0.1, the

measuring accuracy is

(0.5FS+0.1), Electricity bill >100000, the resolution is 1, the measuring accuracy is

(0.5FS+1);

[5]. The resolution of Electricity consumption is adjusted with the measurement results, the highest one is 0.00001kwh

。

Timing index

Timing range 999 days 23 hours 59 minutes

Timing resolution 1 minutes

Currency unit maintained

Currency name CNY TWD USD EUR GBP JPY RUB INR

Currency symbols 元圆 $ € £ ¥ руб Rs.

Currency name KRW TRY THB PHP IDR MYR ZAR AED

Currency symbols 원 ₤ ฿ ₱ Rp RM R إ.د

Currency name SAR ILS CHF DKK UAH BRL Common

Currency symbols ل ا

﷼

₪ Fr kr ₴ R$ ¤

Other indicators

Operating voltage AC85~265V Operating frequency 45~65Hz

Temperature 0~40℃ Humidity ≤90%RH

Size (length x width x

height)

125mmx79mmx38.5mm(the height does not contain the plug’s), Weight 180g

ZHURUI

Shenzhen Zhurui Technology Co.,Ltd.

5 / 13

PR10 Exterior

PR10-E Front PR10-E Back

Interfaces

Home page

Overview Page One Shot Page Real-time Parameters Page

Status bar icons

Warning：The icon flashes when there is an alarm event;

Timer: The icon appears in the status bar when the timer is turned on.

Output power off: The icon appears in the status bar when the outlet is powered off.

Output power on: The icon appears in the status bar when the outlet is powered on.

Home page 1: The icon appears in the status bar when the machine is in overview page.

Home page 2: The icon appears in the status bar when the machine is in one shot page.

Home page 3: The icon appears in the status bar when the machine is in real-time parameters page.

ZHURUI

Shenzhen Zhurui Technology Co.,Ltd.

6 / 13

Key Functions

Keys Function

In Main page In Setting page

Press this key to show the

System Menu.

If confront digits to confirm the number, then jump to next setting, if confront checkbox to check or

not check, if confront radiobox to check the radiobox or not where the cursor on, and jump to next

setting, then confirm it.

Long press this key to power

on or power off the outlets.

If confront digits to reduce the value where the cursor on, if confront the checkbox, radiobox or

button to jump to the previews setting.

Press this key to switch the

main

page, long press it to

show the serial number of this

machine.

If confront digits to increase the value where the cursor is, if confront the checkbox, radiobox or

button to jump to the next setting.

Press this key to clear one shot

electricity consumption, one

shot electricity bill and one

shot elapse time.

Press this key to quit the settings without any changes.

View history

1. Press “ ” key in operating state, to pop up system menu;

2. Press “” key to select “History” tem, now “History” is white letters on blue;

3. Press “ ” key to pop up history menu;

4. Press “ ” key or “ ” key to select “Month-Chart”, “Month-List”, “Yea r -Chart” or “Year-List” item.

5. Press “ ” key again to enter the history records pages.

History Records Pages

Month-Chart Month-List

ZHURUI

Shenzhen Zhurui Technology Co.,Ltd.

7 / 13

Year-Chart Year-List

Function Settings

Process of entering into setting page.

Function settings in detail

Set languages

1. Press “ ” key in main pages, to pop up the main menu.

2. Press “” key to select the menu item that needed, now the item is

white letters on blue.

3. If the item have submenu, press “ ” key to pop up the submenu, then

select the submenu item and press “” key to enter into the setting page,

if no submenu, press “” key to enter into the setting page.

1. See the “Process of entering into setting pages”, enter the language setting page.

2. Press “” key or “” key to move the cursor to the language which is

needed.

3. Press “” key to set language which is needed.

4. Press “” key to move the cursor to the “OK” button, then press “ ” key

to save the settings and quit. Press “” key to quit without any changes.

ZHURUI

Shenzhen Zhurui Technology Co.,Ltd.

8 / 13

 Currency settings

 Charge rate settings

1. See the “Process of entering into setting pages”, select the "General " sub item,

enter the charge rate setting page;

2. Press “” key to move the cursor to the “Enable segment charge” checkbox,

if want to charge with time division (e.g. charge the peak-valley electricity charge

rates), press “” key to check this checkbox, if not need the segment

charging, please do not check this checkbox;

3. Press “” key to move the cursor to the “Decimal digits” checkbox, then

press “” key or “ ” key to set the decimal digits;

4. Press “” key, if “Enable segment charge” checkbox is checked, then jump to

the “OK” button, press “” key again to set the segment charge rates, do as

the step 7. If “Enable segment charge” checkbox not checked, then set the

charge rate, press “”key or “ ” key to set the charge rate, press

“” key to jump to the next digit, then press “ ” key to confirm it .

5. Press “” key to move the cursor to the “OK” button, press “ ” key t o

keep the setting and quit. Press “Return/Clear” to save the settings and quit.

6. If “Enable segment charge” checkbox is checked, then need to set the charge rate

of segment charging, according to the “Process of entering into setting pages”,

select “SegX”(X=1~8) submenu item, enter into the setting page of the charge

rate of segment charging;

7. Use “” key, “” key, and “” key to set the time segment and

charge rate;

8. If needed, can do the settings in the previews segment or next segment, or press

“” key to move the cursor to the “OK” button, press “” key to save

the settings and quit. Press “” key to quit without any changes.

1. See the “Process of entering into setting pages”, enter the currency setting page;

2. Press “” key or “” key to move the cursor to the currency which is

needed;

3. Press “” key to set the currency which is needed;

4. Press “” key to move the cursor to the “OK” button, then press “” key

to save the settings and quit. Press “” key to quit without any changes.

ZHURUI

Shenzhen Zhurui Technology Co.,Ltd.

9 / 13

 The date formats setting

 The time setting

 Setting the timing (Advanced timer (timer 1,timer 2) setting )

1. See the “Process of entering into setting pages”, enter the date format setting

page;

2. Press “” key or “ ” key to select the needed date formats;

3. Press “” key to move the cursor to the “OK” button, press “” key to

save the settings and quit. Press “” key to quit without any changes.

1. See the “Process of entering into setting pages”, select “timer1” or “timer2”

submenu item and enter the advanced timer setting page.

2. Press “” key to set the timer, now the “Enabled” checkbox is blue;

3. Press “” key to check or uncheck this checkbox, then press “ ” key

to set the start time of the timer;

4. Use “ ” key, “ ” key and “ ” key to set the start time of the

timer.

5. Press “” key or “ ” key to select the time option of the timer, then

press “” key to complete time option setting, the time has 4 options:

"Not repeated", "Every day", "Work day" and "Weekend", "Not repeated"

means the machine will power on or power off on the date and time of

setting, "Every day" means no matter which date, the machine will power on

or power off at the setting time, "Work day" means it will do from Monday to

Friday, "Weekend" means it will do only on Saturday and Sunday;

6. Press “” key or “ ” key to select outlet state when the time

reached, press “” key to complete outlet state setting, now the cursor

jump to the “OK” button.

7. Press “” key to save the settings and quit. Press “” key to quit

without any changes.

1. See the “Process of entering into setting pages”, enter the time setting page;

2. Press “” key to set the time, now the tenth of Year is white letters on

blue;

3. Press “” key or “ ” key to adjust the value, then press “ ” key

to achieve the adjustment and enter the next step;

4. Continue to set as the step 3, until to adjust the time;

5. At last press “ ” key to move the cursor to the “OK” button, press

“” key to save the settings and quit. Press “” key to quit without

any changes.

ZHURUI

Shenzhen Zhurui Technology Co.,Ltd.

10 / 13

 Timer setting ( common timer(timers 3-9)setting)

 Switch settings

 Alarm settings

1. See the “Process of entering into setting pages”, enter the alarm setting page.

2. Press “” key to set the alarm, now the hundreds place of Voltage is white

words on blue background.

3. Use “ ” key, “ ” key, and “ ” key to set the alarm value of

voltage, now the cursor jump to the “Enabled” checkbox of voltage.

4. Press “ ” key to set voltage alarm or not, then press “ ” key to the

current alarm setting.

5. Repeat step 3 and step 4 until all items are set, now the cursor jump to the

“OK” button.

6. Press “” key to save the settings and quit. Press “” key to quit

without any changes.

1. See the “Process of entering into setting pages”, select “timer3” to “timer9”

submenu item and enter the general timer setting page.

2. Press “” key to set the timer, now the “Enabled” checkbox is blue.

3. Press “” key to check or uncheck this checkbox, then press “ ” key ,

“” key and “” key to set the start time and outlet state of the timer;

4. Next set the time and outlet state of the Second groups.

5. Set the outlet state is whether repeated everyday or not, if needed to do the

action of the group timer everyday, please check “Everyday” checkbox, if not

needed, please don’t check this checkbox. If the “Everyday” checkbox is not

checked, then it will turn off this timer after the second group timer

performed.

6. At last press “” key to move the cursor to the “OK” button, press

“” key to save the settings and quit. Press “” key to quit without

any changes.

1. See the “Process of entering into setting pages”, enter the outlet setting page.

2. Press “” key or “ ” key to move the cursor to item needed, “On”

means it automatically power on the outlet and begin to supply electricity to

the electrical equipment after the machine start up; “Off” means it power off

the outlet after the machine start up, unless press “ ” more than 3

seconds to power on the outlet , “Same as last time” means the machine will

remember the last outlet states, and will set the outlet state same as last time

after the machine start up.

3. Press “” key to move the cursor to the “OK” button, press “” key to

save the settings and quit. Press “” key to quit without any changes.

ZHURUI

Shenzhen Zhurui Technology Co.,Ltd.

11 / 13

 Output protection settings



 Screen setting

 System settings (Clear accumulated electricity consumption, clear history recording , restore the factory settings)

1. See the “Process of entering into setting pages”, enter the Output Protect

setting page.

2. According to the alarm settings, complete the output protection parameter

settings of voltage, current, power and temperature.

3. If needed, press “” key to check or uncheck the “Launch overload”

checkbox, press “” key to jump to next setting item. If the start-up

current of the equipment test (e.g. the motor) exceed the output protection

current, then the “Launch overload” checkbox need to be checked, if this

checkbox is checked, the machine will not monitor the output current and

power exceed the max current and power limit which was set before, “Launch

overload” will not take effect when the load current less than 2A.

4. If needed, press “” key to check or uncheck the “Auto Recovery”

checkbox, press “ ” key to move the cursor to the “OK” button; if this

checkbox is checked, when the machine is in output protection and power off

the outlets, one minute later if the voltage, current, power or temperature of

the machine are not in the output protection limits, the machine will

automatically power on the outlets to the test equipment.

5. Press “” key to save the settings and quit. Press “” key to quit

without any changes.

1. See the “Process of entering into setting pages”, enter the screen setting page.

2. Press “” key or “” key to adjust the time option for turn off the

screen, press “ ” key to select the option, now the cursor jump to the

“OK” button.

3. Press “” key to save the settings and quit. Press “” key to quit

without any changes.

1. See the “Process of entering into setting pages”, enter the system setting page.

2. Press “” key or “” key to move the cursor to the item need

operation, then press “ ” key, the confirm dialog will pop up at this time.

3. Press “” key or “” key to decide whether to perform the operation

or not, press “ ” key to perform, press “” key to quit and not perform

this operation.

4. Pease use this function cautiously, especially “Factory Reset” will clear all the

records.

ZHURUI

Shenzhen Zhurui Technology Co.,Ltd.

12 / 13

 Enter the help page

*During setting, long press “ ” key or “ ” key can achieve rapid adjustment

Frequently Asked Questions

Number Problems Solutions

1 After startup, outlet is powered off, icon in the

bottom right corner of screen doesn’t change to Icon.

Long press “” key for 3 seconds to turn on the power, or enter “switch

settings” page, set the switch state to “On”, the machine will power on the outlet

automatically after startup.

2 Outlet is powered off during working, icon appears or

blinks, or icon blinks.

The machine is in output protection. Check whether the voltage, current, power or

temperature exceed the output protection limit or not, if needed, modify the output

protection limit or cancel it or checked “Launch overload” checkbox.

3 The machine give out alarm sound when working, the

icon on the lower right corner of screen blinks.

The machine is in alarm status. Check whether the voltage, current, power or

temperature exceed the alarm limit, if needed, modify the alarm settings or cancel it.

4 After power off, the time and the total power consumption

are not saved.

Built-in button cell has run out, now it needs to replace a new button cell, the

battery model is CR2032.

Considerations

1. The machine cannot works in hot and humid environment, please use it in normal temperature and humidity.

2. The working voltage of the machine is AC85V~AC265V.

3. The working current cannot be greater than the maximum operating current.

4. Do not let the machine expose to the dust, corrosive gases or other harmful substances in the environment when use and keep.

5. Do not touch the plug of the machine when using, or you will get an electric shock.

6. If the machine failed working, don not open the machine and replace parts by yourself to avoid electric shock, please contact the manufacturer.

1. See the “Process of entering into setting pages”, enter the help page.

2. The help page has some prompt of simple operation.

ZHURUI

Shenzhen Zhurui Technology Co.,Ltd.

13 / 13

Legal Notices

Without permission of Shenzhen Zhurui Technology Co., Ltd. any unit or individual will not be allowed to extract, copy parts or all of this manual and

transmit in any form. The product described by this manual may contain the copyright of the hardware and software of Shenzhen Zhurui Technology Co., Ltd.

and it may exist license, unless with the written permission of related rights, otherwise, any person cannot be allowed to copy, distribute, copy board,

decompile, disassemble, decrypt, reverse engineer, lease, transfer and do other violations with the aforementioned hardware and software in any form.

Within the limits permitted by applicable law, Shenzhen Zhurui Technology Co., Ltd. can modify the contents of this manual in any case.

Zhurui PR10-E User manual

Zhurui PR10-E User manual

Other documents