Kenmore Elite 58077157710 User manual

Brand: Kenmore Elite

Model: 58077157710

Category: Split-system air conditioners

Type: User manual

Kenmore Elite®

Smart Room Air Conditioner

Aire Acondicionado Inteligente Para Habitación

Models/Modelos: 580.77157710 (15000 BTU)

580.77187710 (18000 BTU)

580.77247710 (25000 BTU)

Sears Brands Management Corporation

Hoffman Estates, IL 60179 U.S.A.

www.kenmore.com

MFL66921603

Use & Care Guide

Manual de Uso y Cuidado

SMART

CONTROL

TABLE OF CONTENTS PRODUCT RECORD

In the space below, record the date of purchase, model,

and serial number of your product. You will find the

model and serial number printed on an identification

plate located on the outside of the cabinet, or behind

the filter at the bottom of the unit. Use a flashlight to

help read the numbers, or remove the cabinet front as

instructed in the Care and Cleaning section.

Have these items of information available whenever you

contact Sears concerning your product.

Model No.

Date of Purchase

Serial No.

Save these instructions and your sales receipt for future

reference.

IMPORTANT SAFETY INSTRUCTIONS ............................. 3-5

GROUNDING REQUIREMENTS ............................................5

FEATURES AND BENEFITS

Key Parts and Components .....................................................6

Electrical Data ..........................................................................6

INSTALLATION REQUIREMENTS

Key Dimensions and Specifications .......................................7

Items Included ...........................................................................7

Tools Required ...........................................................................7

INSTALLATION INSTRUCTIONS

Window Requirements .............................................................8

Preparation of Cabinet ............................................................8

Cabinet Installation.............................................................. 9-11

HOW TO USE

Control Panel and Remote Control ....................................... 12

Inserting the Remote Control Battery ................................... 13

Ventilation ................................................................................ 13

Air Direction ............................................................................. 13

Additional Features ................................................................ 14

Smart Features ........................................................................ 14

FCC Notice .............................................................................. 15

Wireless LAN Module Specifications .................................. 15

Open Source Software Notice .............................................. 15

CARE AND CLEANING

Air Filter .................................................................................... 16

Cleaning the Air Conditioner ................................................ 16

TROUBLESHOOTING GUIDE

Normal Sounds You May Hear .............................................17

Before Calling for Service ................................................ 18-19

WARRANTY ...................................................................... 20

SERVICE ..........................................................BACK COVER

SAFETY MESSAGES

There are many important safety messages in this manual and on your appliance. Always read and obey all safety

messages.

Read all instructions before using this air conditioner.

This is the safety alert symbol. This symbol alerts you to potential hazards that can result in property

damage and/or serious bodily harm or death.

All safety messages will follow the safety alert symbol and the word WARNING or CAUTION as

shown below.

WARNING

Indicates a hazardous situation which, if not avoided, could result in death or

serious injury.

CAUTION

Indicates a hazardous situation which, if not avoided, could result in minor or

moderate injury.

All safety messages are intended to make you aware of potential hazards and

how to reduce the chances of any injury. The safety message may also point out

the negative consequences in case instructions are not properly followed.

IMPORTANT SAFETY INSTRUCTIONS

WARNING

Risk of Fire or Explosion

Do not store or use gasoline or other flammable

vapors and liquids in the vicinity of this or any other

appliance. Read product labels for flammability and

other warnings.

NOTE:

The power supply cord with this air conditioner

contains a current detection device designed to reduce

the risk of fire. Refer to the Electrical Data section for

operation of the current device.

In the event that the power supply cord is damaged, it

cannot be repaired, and it must be replaced with a cord

from the product manufacturer.

WARNING

Avoid fire hazard or electric shock.

Do not use an extension cord or an adapter plug.

Do not remove any prong from the power cord.

3-prong

grounding

plug and

current

detection

device

3-prong grounding

type wall receptacle

Do not,

under any

circumstances,

cut, remove,

or bypass the

grounding

prong.

WARNING

Electrical Requirements

The complete electrical rating of your new room air

conditioner is stated on the product label. Refer to the

rating when checking the electrical requirements.

Be sure the air conditioner is properly grounded. To

minimize shock and fire hazards, proper grounding

is important. The power cord is equipped with a

threeprong grounding plug for protection against

shock hazards.

The air conditioner must be connected to a properly

grounded wall receptacle. If the wall receptacle you

intend to use is not adequately grounded or protected

by a time delay fuse or circuit breaker, have a

qualified electrician install the proper receptacle.

Do not run air conditioner without cabinet in place.

This could result in mechanical damage within the air

conditioner.

Do not use an extension cord or an adapter plug.

IMPORTANT SAFETY INSTRUCTIONS

To reduce the risk of fire, electric shock, or injury to persons when using this appliance, follow basic precautions,

including the following.

Basic Safety Precautions

Be sure the electrical supply is adequate for the model

you have chosen. This information can be found on

the product label, which is located on the side of the

cabinet.

If the air conditioner is to be installed in a window,

you will probably want to clean both sides of the glass

first. If the window is a triple-track type with a screen

panel included, remove the screen completely before

installation.

During installation, make sure that the unit is secured

firmly in the window and installed as detailed in the

installation instructions in this Use & Care Guide. Save

this manual and the installation instructions for possible

future use in removing or reinstalling this unit.

When handling the air conditioner, be careful to avoid

cuts from sharp metal fins on front and rear coils.

Use an assistant to help lift and place the air

conditioner in the window.

Installation

Do not use a damaged power cord or plug, or connect

to a socket which is loose or damaged.

Do not modify or extend the power cord.

Do not disassemble or modify the product.

Do not place heavy objects on the power cord, and

keep the cord out of traffic areas where it presents a

trip hazard.

Plug the product into a dedicated outlet. Do not use an

adapter to plug multiple appliances into one outlet.

Do not place power cord near a heater.

Installation

Follow installation instructions exactly to avoid

vibration or water leakage.

Operation and Maintenance

This product is intended for indoor residential use only,

not for industrial or other commercial applications. The

warranty is void if this product is ever used for other

than private household purposes.

Do not block the air circulation/ventilation openings.

Operation and Maintenance

In the event of a gas leak, do not operate this or any

other appliance. Open doors or windows to ventilate

the room.

Do not stop or start the product by inserting or pulling

out the power plug.

If the power cord needs to be replaced, the work must

be performed by authorized personnel only, using

genuine replacement parts.

Unplug the product by pulling the plug head, not the

power supply cord.

Do not operate with wet hands or in a damp

environment.

Do not open the suction inlet grille of the product

during operation.

Unplug the product if strange sounds, odors, or smoke

come from it.

Turn off and unplug the unit before cleaning.

Never touch the metal parts of the product while

removing the filter.

Do not allow water to run into electric parts of the

product.

Use a soft cloth to clean. Do not use wax, thinners, or

strong detergents.

Unplug the air conditioner when not in use for long

periods.

For repair and maintenance, contact an Authorized

Service Center. See the warranty page for details or

call 1-844-553-6667.

Do not step on the unit or place objects on top of it.

Clean the filter every two weeks. Insert the filter

properly before operating.

Do not drink water drained from the air conditioner.

Do not insert hands or objects into the air intake or

outlet during operation.

If batteries leak onto skin or clothing, rinse affected

areas well with clean water. Do not use the remote if

the battery has leaked.

If battery fluid is ingested, rinse well with water and

consult a physician immediately.

WARNING

CAUTION

IMPORTANT SAFETY INSTRUCTIONS

Risk of Fire or Explosion

Do not use any means to accelerate the defrosting

process or to clean the product, other than those

recommended by the manufacturer.

Store the appliance in a room without continuously

operating ignition sources such as open flames, an

operating gas appliance or an operating electric

heater.

Do not pierce or burn the appliance. Be aware that

refrigerants may not contain an odor.

Risk of Fire or Explosion

This unit contains R32, a flammable refrigerant, and has

special safety precautions not normally associated with

older units. Please follow all precautions and advisories.

Use caution while handling and prevent damage to

the unit. Do not put any holes into the product for any

reason, as this can cause damage to the product and

prevent it from cooling.

Maintenance and cleaning of the product should be

performed by trained personnel. Failure to properly

clean the product can result in damage to the

refrigeration system and or the electrical system.

Keep the air circulation/ventilation openings free from

obstruction.

Service should only be performed by technicians

properly trained and certified in the use of flammable

refrigerants. Any service performed by unauthorized

servicers/individuals will void all warranties.

When storing the appliance, do not put in a room with

any open flame appliances, such as gas water heaters

or furnaces. Also keep away from electric heaters.

Damaged units should be repaired before storage.

CAUTIONWARNING

GROUNDING REQUIREMENTS

Grounding Instructions

This appliance must be grounded. In the event of

malfunction or breakdown, grounding will reduce

the risk of electric shock by providing a path of least

resistance for electric current. This appliance is equipped

with a cord having an equipment-grounding conductor

and grounding plug. The plug must be plugged into

an appropriate outlet that is properly installed and

grounded in accordance with all local codes and

ordinances.

DO NOT CUT OR REMOVE THE THIRD

(GROUND) PRONG FROM THE POWER PLUG.

IMPORTANT: Please read carefully.

To Connect Electricity

WARNING

Improper connection of the equipment-grounding

conductor can result in risk of electric shock. Check

with a qualified electrician or service technician if you

are in doubt as to whether the appliance is properly

grounded. Do not modify the plug provided with the

appliance. If it does not fit the outlet, have a proper

outlet installed by a qualified electrician. Failure to

follow these warnings can cause serious injury, fire,

electric shock, or death.

WARNING

Being exposed to direct airflow for an extended period

could be hazardous to your health.

Running the fan will not prevent oxygen depletion.

Make sure to open doors or windows occasionally to

ventilate the room.

WARNING:

This product contains chemicals known to

the State of California to cause cancer and birth defects

or other reproductive harm.

Wash hands after handling.

FEATURES AND BENEFITS

Key Parts and Components

WARNING

Install this appliance in accordance with National Electric Code guidelines.

Air Filter

Front

Grille

Air Intake

(Inlet Grille)

Air Discharge

Cabinet

Upper

Guide

Remote Control

QR code emblem

(For establishing

smart app connection)

Horizontal

Air Deflector

(Vertical Louver)

Vertical Air Deflector

(Horizontal Louver)

Evaporator

Brace

Compressor

Condenser

Base Pan

Power Cord

Electrical Data

120 V 240 V

RESET

TEST

RESET

TEST

RESET

TEST

Power cord may include a current interrupter device.

Test and reset buttons are provided on the plug case.

Periodically test the device by first pressing TEST and

then RESET. If the TEST button does not trip or if the

RESET button will not stay engaged, stop using the air

conditioner and contact a qualified service technician.

WARNING

Never push the test button during operation.

Doing so can damage the plug.

Do not remove, modify, or immerse this plug. If

this device trips, the cause should be corrected

before further use.

CAUTION

The conductors inside this cord are surrounded

by shields, which monitor leakage current.

These shields are not grounded. Periodically

examine the cord for any damage. Do not use

this product in the event the shields become

exposed. Avoid shock hazard. This unit cannot

be user-serviced. Do NOT open the tamper-

resistant sealed portion. All warranties and

performance will be voided.

BTU & Wall Receptacle Power Supply

15000 BTU

Use 15 A, time-delay fuse

or 15 A circuit breaker.

Standard 120 V, 3-wire

grounding receptacle rated

15 A/120 VAC/60 Hz

18000 BTU

Standard 240 V, 3-wire

grounding receptacle rated

15 A/240 VAC/60 Hz

25000 BTU

Use 20 A, time-delay

fuse or 20 A circuit

breaker.

Standard 240 V, 3-wire

grounding receptacle rated

20 A/240 VAC/60 Hz

WARNING

DO NOT USE EXTENSION CORDS RISK OF

FIRE, SERIOUS INJURY OR DEATH.

Do not use an extension cord with this

product.

Do not use surge protectors or multi-outlet

adapters with this product.

INSTALLATION REQUIREMENTS

.H\'LPHQVLRQVDQG6SHFLoFDWLRQV

Description Window Air Conditioner

Electrical Requirements See electrical rating plate on unit

Dimensions

(without curtain panels)

26 in. (W) X 28.1 in. (D) X 17.7 in. (H)

66 cm (W) X 71.4 cm (D) X 44.9 cm (H)

Net Weight 15K BTU: 112 lb. (50.8 kg) / 18K BTU: 130 lb. (59 kg) / 25K BTU: 136 lb. (61.7 kg)

Items Included

Heatproof foam (2)

(adhesive-backed)

Right curtain panel

Left curtain panel

Drain joint pipe

Foam strip

(non-adhesive)

Foam-PE (2)

(adhesive-backed)

Frame guide (2)

Window locking bracket

Sill bracket (2)

Support

bracket (2)

Tools Required

Phillips-head screwdriver Flat-blade screwdriver Adjustable wrench

Level Measuring tape Knife

Scissors Pencil

Type A (12) Type B (7) Type C (5) Type D (2) Carriage Bolt (2) Lock Nut (4)

INSTALLATION INSTRUCTIONS

Window Requirements

Size

NOTE:

Secure all supporting parts to firm wood,

masonry, or metal.

This room air conditioner is designed for installation in

standard double-hung windows with actual opening

widths from 29” to 41”.

The upper and lower window sash must open

sufficiently to allow a clear vertical opening of 19”

from the bottom of the upper sash to the inside sill.

The height offset between the inside sill and outside sill

must be less than 1 ¼".

29" to 41"

19" min

Clearance

Proper clearance enhances the cooling efficiency of the

product.

If a storm window presents interference, fasten a 2”

wide wood strip to the inner window sill across the

full width of the sill. The wood strip should be thick

enough to raise the height of the window sill so that

the unit can be installed without interference by the

storm window frame.

(See drawing.) The top of the wood strip on the

inside sill should be approximately ¾” higher

than the storm window frame or wood strip on the

outside sill to help condensation to drain properly to

the outside.

If necessary, install a second wood strip (same

thickness as first strip) across the full width of the

outer sill, flush against the back of the inner sill.

Indoors

Inner Sill

Outer Sill

Storm

Window Frame

Wood Strip Mounted

on Top of Inner Sill

¾"

Clearance

Wood Strip

Outdoors

Preparation of Cabinet

Remove the 4 screws which fasten the cabinet at

both sides and at the back. (2 of the screws will be

used later to refasten the sides of the cabinet to the

unit.)

Shipping

Screws

Slide the unit from the cabinet by gripping the base

pan handle and pulling forward while bracing the

cabinet.

CAUTION

The unit is heavy. To prevent injury, use proper lifting

techniques when pulling unit forward from cabinet.

Obtain assistance from another person if possible.

Cut the window sash seals (Foam-PE) to the

proper length. Peel off the backing and attach

the adhesive-backed foam to the underside of the

window sash and the bottom of the window frame.

Foam-PE

(Adhesive backed)

Insert the lower curtain panel guides into the bottom

of the cabinet. Insert the guides so that the flange

faces to the rear of the cabinet.

INSTALLATION INSTRUCTIONS

Insert the top and bottom rails of the curtain panels

into the upper and lower panel guides.

Upper Guide

Right Curtain Panel

Left Curtain Panel

Lower Guide

CAUTION

The lower panel guides are easily broken. Be careful

with them when installing the cabinet.

Fasten the curtain panels to the unit with 10 type A

screws.

Screws (Type A)

Cabinet Installation

Center Line

Outside Sill

Inside Sill

1 ¼" max.

Open the window. Mark a line on the center of the

inside sill and extending across the center of the

outside sill.

Loosely attach the sill bracket to the support bracket

using a carriage bolt and a lock nut.

Sill Bracket

Carriage

Bolt

Lock Nut

Support Bracket

Carefully place the cabinet in the window and align

the center hole on the cabinet bottom front with the

center line marked on the window sills. Align the

support brackets with the cabinet track holes and

mark the sill along the sides of each sill bracket.

Remove the cabinet from the window and attach

each sill bracket on the outside sill between the

marks using 2 type B screws.

Screws (Type B)

Sill Bracket

Carefully place the cabinet back in the window

and align the cabinet track holes with the support

brackets. Attach each support bracket to the

cabinet through a cabinet track hole, using a type

D screw and a lock nut. Use the first track hole past

the sill bracket on the outer edge of the window

sill. Tighten the lock nuts on the support brackets to

secure them to the sill brackets. Be sure the cabinet

slants down toward the outside.

Screw (Type D)

Support Bracket

Lock Nut

INSTALLATION INSTRUCTIONS

Pull each curtain panel out until it meets the window

sash track. Pull the bottom window sash down

behind the upper guide until they meet.

Front Angle

Sash Track

Upper Guide

Inside Window Sill

NOTE:

Do not pull the window sash down so tightly

that the movement of the curtain panels is restricted.

Attach the cabinet to the inside sill by driving 3 type

B screws through the cabinet and into the sill.

Sash Track

Front Angle

Screws (Type B)

NOTE:

Install the cabinet with a very slight

downward tilt toward the outside.

CAUTION

Do not drill a hole in the bottom pan. The product

is designed to operate with approximately ½” of

water in the bottom pan.

Use a screwdriver or power drill to attach the

curtain panels to the window sashes by driving type

C screws into the sashes through the cabinet holes

shown in the figure below.

Screws (Type C)

With the aid of an assistant, slide the unit into the

cabinet. Reinstall the screws removed from the

cabinet sides in step 1.

CAUTION

The unit is heavy. Use an assistant to help lift the

unit and set it in place. Lifting and maneuvering

the unit by yourself could result in injury.

Hold the unit firmly in place until the window

frame is lowered to meet the top surface of the

unit directly behind the upper guide. If the unit

falls from the window, it could cause personal

injury or property damage.

Cut the non-adhesive foam strip to the proper length

and insert it between the upper window sash and

the lower window sash.

Foam Strip

(Not adhesive

backed)

Attach the window locking bracket with a type C

screw.

Window Locking Bracket

INSTALLATION INSTRUCTIONS

Cut the adhesive-backed heatproof foam to match

the size of the curtain panels. Remove the backing

from the heatproof foam and attach it to the curtain

panels.

Heatproof Foam

NOTE:

Heatproof foam improves the cooling

capability of the air conditioner.

Fold out the vent control lever located to the left of

the control panel, as shown.

Connect the wire harness from the front grille

assembly to the air conditioner.

Attach the front grille assembly to the cabinet by

inserting the grille tabs into the slots on the front

of the cabinet. Push the grille in until it snaps into

place.

NOTE:

Carefully guide the vent control lever through

the grille as you push the grille in.

Open the air inlet grille and secure the front grille

assembly with 1 type A screw through the bottom of

the front grille. (There are 2 type A screws packed

in a small bag. Use one and store one as a spare.)

The window installation of the room air conditioner

is now complete. See the Electrical Data section for

information on attaching the power cord to an electrical

outlet.

HOW TO USE

WARNING

To reduce the risk of fire, electric shock, or injury to persons, read and follow this entire Use & Care Guide,

including the Important Safety Instructions, before operating this air conditioner.

Control Panel and Remote Control

Remote Control

POWER

Press to turn the air conditioner ON or OFF.

FAN SPEED BUTTON

Press to set the fan speed to Low, Medium, or High.

The display will show one, two or three bars.

DELAY ON/OFF TIMER

Delay ON

- When the air conditioner is off, set it to

automatically turn on from 1 to 24 hours later, at its

previous mode and fan settings.

Delay OFF

- When the air conditioner is on, set it to

automatically turn off from 1 to 24 hours later.

Each press of the Timer button advances the timer

by 1 hour. After the last press the display returns to

the temperature setting.

OPERATION MODE BUTTON

Press the Mode button to cycle between 4 types

of air conditioner operation: Cool / Energy Saver

/ Fan Only / Dry.

Cool

- This mode is ideal on hot days to cool and

dehumidify the room quickly. Use the Temp

buttons to set the desired room temperature and

use the Fan Speed button to set the desired fan

circulation speed.

Energy Saver

- In this mode the compressor and

fan turn off when the set temperature is achieved.

Approximately every 3 minutes the fan turns on to

allow the unit sensor to accurately determine if more

cooling is needed.

Fan Only

- In this mode the fan circulates air but

the compressor does not run. Use the Fan Speed

button to set fan speed to High, Medium or Low. In

this mode, you can not adjust the set temperature.

Dry

- This mode is ideal for rainy and damp days

to dehumidify the room rather than cooling it

significantly. Humidity is removed from the room by

the combination of compressor operation and the

fan speed fixed at Low. The compressor and fan

turn off once the set temperature is reached. Fan

speed cannot be adjusted in Dry mode.

TEMPERATURE CONTROL

The thermostat monitors room temperature to

maintain the desired temperature. The thermostat

can be set between 60 °F–86 °F (16 °C–30 °C).

Press

or arrows to increase or decrease

temperature setting.

REMOTE CONTROL SENSOR

Receives signal from Remote Control.

FILTER RESET

The Filter Reset LED lights up to notify you that the

filter needs to be cleaned. After cleaning the filter,

press Temp

and together on the control panel

to turn off the Filter Reset light. (The filter reset must

be done using the control panel, not the remote

control.)

NOTE:

This feature is a reminder to clean the air

filter for more efficient operation. The LED light

turns on after 250 hours of operation.

SMART CONNECT FUNCTION

SMART icon LED turns ON when unit is successfully

connected to the internet.

AUTO RESTART

If the air conditioner turns off due to a power

outage, it will restart automatically once the power

is restored, with the same settings as were set before

the unit turned off.

ENERGY SAVER

The unit defaults to the Energy Saver mode each

time the unit is switched on except in Fan mode or

when power is restored after an electrical power

outage.

CAUTION

The remote control will not function properly if

the AC infrared sensor is exposed to direct light

or if there are obstacles between the remote

controller and the air conditioner.

HOW TO USE

Inserting the Remote Control Battery

Push the release in with your thumb and remove the

cover on the back of the remote control.

Insert one new AAA 1.5 V battery, paying attention

to the polarity.

NOTE:

One new battery is supplied with the air

conditioner for use in the remote control.

Reattach the cover on the remote control.

NOTE

Do not use a rechargeable battery. Make sure that the

battery is new.

In order to prevent discharge, remove the battery from

the remote control if the air conditioner is not going to

be used for an extended period of time.

Keep the remote control away from extremely hot or

humid places.

To maintain optimal operation of the remote control,

the remote sensor should not be exposed to direct

sunlight.

Ventilation

Push the ventilation lever in to the closed position

to maintain the best cooling performance. Pull the

ventilation lever out to open the vent and draw fresh air

into the room.

Close Open

Air Direction

Airflow can be adjusted by changing the direction of the

air conditioner’s louvers.

$GMXVWLQJ+RUL]RQWDO$LUpRZ'LUHFWLRQ

The horizontal airflow is adjusted by moving the lever to

the left or right.

$GMXVWLQJ9HUWLFDO$LUpRZ'LUHFWLRQ

Touch the horizontal louvers to adjust the airflow up or

down.

NOTE:

When the weather is extremely hot, the unit may

turn off automatically to protect the compressor.

Additional Features

Drain Pipe

In humid weather, excess water may cause the base pan

to overflow. To drain the water, remove the drain cap

and secure the drain pipe to the rear hole of the base

pan.

CAUTION

Take care when inserting the drain pipe. Push

away from the sharp fins to avoid slipping and

injuring yourself.

Press the drain pipe into the hole by pushing down and

away from the fins to avoid injury.

Drain Pipe

Slinger Fan

This air conditioner is equipped with a slinger fan. (See

drawing.)

The fan’s outer ring picks up the condensed water from

the base pan if the water level gets high enough. The

water is then picked up by the fan and expelled through

the condenser, making the air conditioner more efficient.

Ring

Smart Features

Getting Connected

You need the following devices and applications to use

the smart features of your air conditioner.

Required Devices:

A wireless connection, Kenmore

Smart AC app, and a mobile device.

Required Application:

Kenmore Smart AC app.

IMPORTANT:

You must download the Kenmore Smart

AC app to your mobile device, connect your Kenmore

Elite Smart appliance to the internet, and register the

appliance to your account by following the prompts.

Connecting the Air Conditioner

Refer to the Quick Start Guide that came with your

smart appliance for detailed instructions on creating

a Kenmore account and setting up the appliance for

connected operation from your mobile device. For

additional assistance, visit http://www.kenmore.com/

smart

Remote Operation

Use a mobile device to control the air conditioner

remotely. Start, stop, change modes, adjust temperature,

and set schedules, all from a mobile device.

NOTE:

When successfully connected to the internet, the

SMART icon LED on the unit control panel will turn ON.

HOW TO USE

FCC Notice

(for transmitter module contained in this product)

This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant

to Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful

interference in a residential installation. This equipment

generates, uses, and can radiate radio frequency energy

and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio

communications. However, there is no guarantee that

interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio

or television reception, which can be determined by

turning the equipment off and on, the user is encouraged

to try to correct the interference by one or more of the

following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and

receiver.

Connect the equipment to an outlet on a circuit

different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV

technician for help.

This device complies with part 15 of the FCC rules.

Operation is subject to the following two conditions:

(1) this device may not cause harmful interference,

and

(2) this device must accept any interference received,

including interference that may cause undesired

operation of the device.

Any changes or modifications in construction of this

device which are not expressly approved by the

party responsible for compliance could void the user's

authority to operate the equipment.

FCC RF Radiation Exposure Statement

This equipment complies with FCC radiation exposure

limits set forth for an uncontrolled environment. This

transmitter must not be co-located or operating in

conjunction with any other antenna or transmitter.

This equipment should be installed and operated with

a minimum distance of 20 cm (7.8 inches) between

the antenna and your body. Users must follow the

specific operating instructions for satisfying RF exposure

compliance.

:LUHOHVV/$10RGXOH6SHFLoFDWLRQV

Operating

Frequency

2.412–2.462 GHz

Complies with IEEE 802.11b/g/n

Open Source Software Notice

To obtain the source code that is contained in this

product under open source licenses, visit https://

kenmore.com/opensource.

In addition to the source code, all referred license

terms, warranty disclaimers, and copyright notices are

available for download.

WARNING

To reduce the risk of fire, electric shock, or injury to persons, read and follow this entire Use & Care Guide,

including the Important Safety Instructions, before operating this air conditioner.

Unplug the air conditioner before cleaning to avoid the risk of electric shock.

Failure to follow this

warning can cause serious injury, fire, electric shock, or death.

Never use harsh chemicals, abrasive cleaners, or solvents to clean the air conditioner.

They will damage

the finish.

Air Filter

Check the air filter at least twice a month to see if

cleaning is necessary. Trapped particles in the filter

can build up and block the airflow, reducing cooling

capacity and causing an accumulation of frost on the

evaporator.

Cleaning the Air Filter

Pull down the air inlet grille by placing fingertips in

the depressions at the top of each side. Grasp the

fingertip tab at the top middle of the air filter and

pull the filter forward then up to remove.

Wash the filter in lukewarm water (below

104°F/40°C).

Gently shake the excess water from the filter and

reinstall it.

Cleaning the Air Conditioner

Wipe the front grille and inlet grille with a cloth

dampened in a mild detergent solution.

Clean the cabinet with a mild soap or detergent and

lukewarm water, then polish with liquid appliance wax.

CARE AND CLEANING

TROUBLESHOOTING GUIDE

Normal Sounds You May Hear

NOTE:

Do not drill any holes in the base pan to eliminate these normal sounds. Doing so will void the warranty.

High Pitched Whine

Today's high efficiency compressors may have a high-pitched whine during the cooling cycle.

Sound of Rushing Air

At the front of the unit, you may hear the sound of rushing air being moved by the fan.

Gurgle/Hiss

Gurgling or hissing noise may be heard due to refrigerant passing through evaporator during normal operation.

Pinging or Swishing

Droplets of water hitting condenser during normal operation may cause pinging or swishing sounds.

Vibration

Unit may vibrate and make noise because of poor wall or window construction or incorrect installation.

Before Calling for Service

If your air conditioner does not function properly or does not function at all, check the following before you call for

service. If you cannot find a solution, turn off the air conditioner and call the Kenmore Customer Care Hotline at

1-844-553-6667.

Problem Possible Cause Solutions

Air conditioner turns on

and off rapidly.

Outside temperature is extremely high. Set fan speed at the fastest setting for

maximum cooling.

Dirty air filter. Airflow is restricted. Clean the air filter.

Noise when unit is

cooling.

Window is vibrating due to improper

installation.

Refer to the installation instructions or

check with the installer.

Normal sound of air movement. This is normal. If too loud, set the fan to a

lower speed.

Remote will not operate

air conditioner.

The remote control is out of range of the

sensor.

Hold the remote control within 20 feet

and a 120° radius of the front of the air

conditioner.

Path between sensor and remote is

blocked.

Remove the obstruction or stand where

there is a clear path between the remote

and the sensor.

Battery is not installed properly. Reinstall battery, checking the polarity.

Sensor is in direct path of sunlight. Position a piece of furniture or other object

to cast a shadow over the sensor.

Room too cold. Set temperature is too low. Increase the set temperature.

Air conditioner does not

start.

The air conditioner is unplugged. Make sure the air conditioner plug is

pushed completely into the outlet.

The current interrupter device on the

power cord has tripped.

Press the RESET button located on the

power cord plug. If the RESET button will

not stay engaged, discontinue use of the

air conditioner and contact a qualified

service technician.

House fuse has blown or circuit breaker

tripped.

Check the house fuse/circuit breaker box

and replace the fuse or reset the breaker.

Temperature setting is warmer than room

temperature.

Set temperature to a lower setting.

Unit was turned OFF and ON too quickly. Built-in delay will prevent compressor from

turning on for 3 minutes.

Air conditioner blows

fuses or trips circuit

breaker.

Too many electrical devices are being

used on the same circuit.

Unplug or relocate electrical devices using

same circuit.

Unit is rated over 7.5 Amps. Unit should be plugged into a single circuit

outlet.

Unit is plugged into an extension cord. Do not use an extension cord to run the

unit.

Unit was turned OFF and ON too quickly. Turn unit OFF and wait 3 minutes before

restarting.

TROUBLESHOOTING GUIDE

Problem Possible Cause Solutions

Air conditioner does not

cool as it should.

Airflow is restricted. Make sure there are no curtains, blinds,

or furniture blocking the front of the air

conditioner.

The temperature control is not set correctly. In COOL mode, press Decrease (v).

The air filter is dirty. Clean the filter at least every 2 weeks. (See

the Care and Cleaning section.)

The room was very hot. After the air conditioner is turned on, allow

time for the room to cool down.

Cold air is escaping. Check for open furnace floor registers and

cold air returns.

Cooling coils have iced up. See “Air conditioner freezing up” below.

Air conditioner freezing

up.

The cooling coils are iced over. Ice may block the airflow and prevent the

air conditioner from properly cooling the

room. Set the mode control to High Fan or

High Cool.

Water drips outside. Room is hot and humid. This is normal when the weather is hot and

humid.

Water drips inside. Air conditioner is not installed properly for

water drainage.

Make sure the air conditioner slants

slightly downward from the front of the

cabinet to the rear. Reposition or shim the

cabinet as necessary. DO NOT drill into

the drain pan.

Water collects in base

pan.

Moisture is removed from the air and

drains into the base pan.

This is normal. It will occur for short

periods in areas where there is low

humidity and for longer periods in very

humid areas.

For detailed information on the Energy Star program, visit www.energystar.gov.

If “CH” appears in the display, call the Kenmore Customer Care Hotline at 1-844-553-6667.

WARRANTY

Kenmore Elite Limited Warranty

WITH PROOF OF SALE, the following warranty coverage applies when this appliance is correctly installed,

operated and maintained according to all supplied instructions.

FOR ONE YEAR from the date of sale this appliance is warranted against defects in material or workmanship.

A defective appliance will receive free repair or replacement at option of seller.

For warranty coverage details to obtain free repair or replacement, visit the web page:

www.kenmore.com/warranty

This warranty applies for only 90 DAYS from the date of sale if this appliance is ever used for other than

private household purposes.

This warranty covers ONLY defects in material and workmanship, and will NOT pay for:

1. Expendable items that can wear out from normal use, including but not limited to filters, belts, bags or

screw-in base light bulbs.

2. A service technician to clean or maintain this appliance, or to instruct the user in correct appliance

installation, operation and maintenance.

3. Service calls to correct appliance installation not performed by Sears authorized service agents, or to

repair problems with house fuses, circuit breakers, house wiring, and plumbing or gas supply systems

resulting from such installation.

4. Damage to or failure of this appliance resulting from installation not performed by Sears authorized

service agents, including installation that was not in accord with electrical, gas or plumbing codes.

5. Damage to or failure of this appliance, including discoloration or surface rust, if it is not correctly

operated and maintained according to all supplied instructions.

6. Damage to or failure of this appliance, including discoloration or surface rust, resulting from accident,

alteration, abuse, misuse or use for other than its intended purpose.

7. Damage to or failure of this appliance, including discoloration or surface rust, caused by the use of

detergents, cleaners, chemicals or utensils other than those recommended in all instructions supplied with

the product.

8. Damage to or failure of parts or systems resulting from unauthorized modifications made to this

appliance.

9. Service to an appliance if the model and serial plate is missing, altered, or cannot easily be determined to

have the appropriate certification logo.

Disclaimer of implied warranties; limitation of remedies

Customer’s sole and exclusive remedy under this limited warranty shall be product repair or replacement

as provided herein. Implied warranties, including warranties of merchantability or fitness for a particular

purpose, are limited to one year or the shortest period allowed by law. Seller shall not be liable for incidental

or consequential damages. Some states and provinces do not allow the exclusion or limitation of incidental or

consequential damages, or limitation on the duration of implied warranties of merchantability or fitness, so

these exclusions or limitations may not apply to you.

This warranty applies only while this appliance is used in the United States.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

6HDUV%UDQGV0DQDJHPHQW&RUSRUDWLRQ+RçPDQ(VWDWHV,/

Page is loading ...

Kenmore Elite 58077157710 User manual

Brand: Kenmore Elite

Model: 58077157710

Category: Split-system air conditioners

Type: User manual

Download PDF

report

in other languages

español: Kenmore Elite 58077157710 Manual de usuario

Kenmore Elite 58077157710 User manual

Kenmore Elite 58077157710 User manual

in other languages

Related papers

Other documents