Nanoxia Deep Silence 3 Specification

Brand: Nanoxia

Model: Deep Silence 3

Category: Computer cases

Type: Specification

Nanoxia Deep Silence 3 is a soundproofed midi tower case designed for silent operation while maintaining low system temperatures. It supports ATX, M-ATX, and Mini-ITX motherboards, up to eight hard drives, and long graphics cards (up to 430mm with HDD cage removed). Features include tool-free mounting for optical drives, a 2-channel fan controller for up to six fans, and removable dust filters for easy cleaning.

Introduc on

Congratula ons on the purchase of your new Nanoxia Deep Silence 3 midi tower. We are

con dent that you will be delighted by your new PC case for many years to come.

Nanoxia’s Deep Silence series have been designed and developed by an experienced team of

developers in Germany. The silent op mized PC cases are of the highest quality and combine

the best possible func onality with the highest level of  exibility.

The Deep Silence 3 Tower o ers lots of space for long graphics cards and up to eight hard

drives. The middle HDD cage of Deep Silence 3 is removable, allowing the easy installa on of

extra-long VGA cards.

The secondary moun ng rail on the bo om makes it possible to maintain the number of

moun ng slots for hard drives. In addi on the hard drive capacity can be expanded by

purchasing op onal HDD cages, op onal available in stores.

Speci ca ons

Dimensions: 456 x 207 x 520 mm (Height x Width x Depth)

Material: 0.6 mm steel

External drive bays: 2 x 5.25 inch (tool-free)

1 x 5.25 inch /w 3.5 inch adapter (tool-free)

Internal drive bay: 5 x 2.5/3.5 inch bays (decoupled)

3 x 2.5 inch bays

Fan screws Stand-o s for mainboard Screws for mainboard

moun ng

Moun ng screws for

3.5 inch HDD/SSD

Moun ng screws for

2.5 inch HDD/SSD

Screws for 3.5 inch

moun ng frame

Moun ng screws for PSU Thumbscrews EPS-Extension

Accessories

Features:

- Complete soundproong with high quality materials meeng industrial standards

- Tool-free mounng of opcal drives

- Max. VGA length: 345 mm (up to 430 mm with the HDD cage removed)

- Room for CPU coolers with a maximum height of up to 162 mm

- Mounng hole for CPU cooler in the motherboard tray

- Cable management with 6 rubberised holes in the motherboard tray

- Nanoxia VentCover (noise insulated): 2 x top cover

- 2 x USB 3.0, 1 x USB 2.0

- Freely-adjustable 2-channel fan control for up to 6 fans

Noise Insulaon:

The Nanoxia Deep Silence 3 has been developed with the aim to oer the buyer a low-noise

case, while at the same me allowing for extremely low system temperatures. The sound

insulaon design of the Deep Silence 3 is based on mulple interacng design elements:

The most important part is the large scale lining of the case with sound-absorbing insulaon

materials. These materials are manufactured specically to meet the requirements of the

developers of the Nanoxia Deep Silence case series and act equally against airborne sound and

structure-borne noise.

The removable Nanoxia VentCovers mask the 120/140 mm fan holes in the case top. They

allow the user to choose between the least possible noise and improved case venlaon.

Another design element for opmum sound insulaon is the use of two sound-insulated front

doors. The doors are equipped with sound-absorbing foam. Hard drives and power supply are

also decoupled mounted. The whole concept of sound proong of the Deep Silence 3 meets

the highest expectaons.

Venlaon System:

The Nanoxia Deep Silence 3 has an integrated venlaon system consisng of three 120 mm

Deep Silence fans and a built-in 2-channel fan controller. A total of up to six fans can be mounted.

The Deep Silence axial ow fans have been specically opmised for very quiet operaon. The

range of fan speeds and controls was designed to enable each user to adjust the case

venlaon to their own needs.

In the front and under the  oor, there are removable, easy to clean dust  lter.

On the next pages you can  nd some useful  ps and explana ons for the op mal use of your

new case and for the installa on of your hardware.

1. Installa on of the motherboard

You can mount ATX, M-ATX and Mini-ITX motherboards in the Deep Silence 3. In order to

ensure an easy installa on of your motherboard, we suggest the following procedure:

Please consult the

following charts to  nd

your motherboard form

factor.

A ach the included

EPS extension to your

motherboard - do not

connect it from to the

power supply yet.

Mini-ITX Mainboard Micro-ATX Mainboard ATX Mainboard

Fans:

Front: 2 x 120 mm Nanoxia Deep Silence fans (max. 1,300 rpm)

Rear: 1 x 120 mm Nanoxia Deep Silence fan (max. 1,300 rpm)

Op onal Equipment:

Bo om: 2 x 120/140 mm fans

Top cover: 1 x 120/140 mm fan (removal of the HDD-holder necessary)

Please visit our website at www.nanoxia-world.com

Next, mount the CPU cooler - for bulky coolers, the a achment of the EPS extension a er

installa on can be diﬃ cult. Place the motherboard carefully into the case and thread while the

EPS extension through the opening provided at the top of motherboard tray.

Then screw the motherboard to the motherboard stando s. A er installing the power supply,

you can connect the EPS extension at the back of the motherboard tray with the EPS connector

of the power supply.

2. Installa on of external drives

You can install up to three external drives in the Deep Silence 3. An adapter frame for

moun ng a 3.5 inch drive is included.

2.1 Op cal drives

To install the op cal drives, please remove both side panels. The installa on of op cal drives is

tool-free.

Remove the 5.25 inch cover by pulling the lateral  l ng lever cau ously towards you and take

out the cover.

Then loosen the lock on both sides by dragging the

black slider backwards (1).

Next slide the drive into the desired posi on.

Lock the holder by pushing the slider back to its original

posi on (2).

Please note that the two lower sha s are equipped with steel panels, which you have to

remove when you want to use the lower drive bays. To do this, move the steel panels gently

back and forth un l you can remove them.

2.2 U lizing the external 3.5 inch bay

If you for example desire to place a 3.5 inch card

reader, you can use the internal adapter for this

purpose.

Before you take out the internal adapter, please

remove the 3.5 inch steel cover as shown on the

picture.

Open the two quick release locks of the 5.25 inch bay and remove the moun ng frame. Then

a ach the card reader in the frame, as shown below. Then place the frame with the card

reader back into the slot and lock the quick release. Finally, a ach the included 3.5 inch

adapter to the front cover over the card reader.

3. Installa on op ons of HDD’s

In the Deep Silence 3 you can mount up to  ve 3.5 inch hard drives (decoupled), as well as

three 2.5 inch HDD / SSD in three HDD cages. The middle HDD cage is modular and can be

removed or transferred to the secondary holder

3.1 Moun ng of hard disk drives

Install the 2.5 or 3.5 inch hard drives in the illustrated moun ng frames. In order to extract the

frame, squeeze the protruding brackets and pull the slide out gently. This applies both to the

2.5 inch and the 3.5 inch drive sleds.

Mounting of 3.5 inch drives

(3.5 inch sled)

Mounting of 2.5 inch drives

(3.5 inch sled)

Mounting of 2.5 inch drives

(2.5 inch sled)

To lock the drive, push the bra-

cket with the drive back

installed back into the slot un l

the bracket is re-engaged.

3.2 Conversion and removal of the HDD-cage

In order to enable the installaon of extra-long VGA cards, the middle HDD cage of the Deep

Silence 3 is modular. If you want to remove the hard drive cage to install a very long graphics

card, please remove both side panels rst.

In order to remove the cage, you have to simultaneously pull the lever at the back facing up

and press the tab on the front down.; pull the cage gently outwards.

If necessary, you can aach the modular cage on the holder provided on the case boom.

Please slide the hard drive cage into it unl it is secured by the lever.

4. Fan assembly

Three 120 mm fans are pre-installed in your Deep Silence 3. You can mount up to six fans in

total.

We recommend the use of the 120 or 140 mm Nanoxia Deep Silence fans, available separately.

These are technically and visually equivalent to the factory-installed case fans and will work in

perfect harmony with the built-in fan control of your case.

You can, of course, connect the addional fans to the fan controller.

Front and boom of the Deep Silence 3 are equipped with easy to clean dust lters.

We recommend that you clean them on a regular basis.

4.1 Fans in the case front

To switch the fans in the front or to clean the dust lters, please remove the front panel by

holding the cutout at the boom and pull it towards you with a rm tug.

Next, remove the four screws with which the dust lter is connected to the front and take

it out.

Please be advised that the fans are screwed to the dust lter.

The front dust lter allows the installaon of either 2 x 120 mm or 1 x 140 mm fans.

Two 120 mm Deep Silence fans (1.300 rpm) are preinstalled.

4.2 Fans under the top cover

If you want to install addional fans at the top of the case, please remove the Nanoxia

VentCovers rst by removing the screws on the outside of the case. Next, hold the fans from

the inside and secure them to the top by fastening the screws from the outside.

Case fans installed at the top of the case should exhaust air out of the case (fan rear side

facing outwards).

4.3 Fans at the boom of the case

If you want to mount a 120 or 140 mm fan on

the case boom, you must remove the hard

drive cage mounng located at the boom.

The rail is aached with four screws to the

boom.

Addional case fans in the side panel and on the boom of the Deep Silence 3 should be

mounted so that cooler air is introduced into the case (fan rear side facing inwards).

5. The 2-channel fan controller

The Deep Silence 3 is equipped with a 2-channel fan control for up to six case fans. You can

operate up to three fans per channel.

5.1 Connecng the fans to the fan control

The fan controller is powered by a 4-pin Molex connector that is connected directly to the

power supply.

The controller has two channels (A and B), with each channel able to control up to three 3-pin

fans, therefore a total of six fans can be controlled.

The fan controller is not designed for the operaon of powerful fans. Please take this into

account in parcular when using fans from other manufacturers. The maximum power per

channel must not exceed 18 was.

5.2 Operaon of the fan control

The sliders for controlling the fans controller can be found behind the upper front door. The

upper slider controls channel A and the lower slider controls channel B.

6. The I/O-Panel

The I/O panel includes connectors for external USB devices (1 x USB 2.0, 2 x USB 3.0), and the

microphone and headphone ports.

The blue USB connectors are super-Speed USB 3.0, the USB 2.0 port is black. The le audio

connector (when viewed from the front) is for headphones, the right is intended for a

microphone.

The hard drive acvity is indicated by ickering of the green illuminated power buon.

7. Support

Dear customer,

The PC case you purchased has undergone a very thorough quality control.

Nevertheless, should there be any unexpected problems with your case we ask that you rst

approach the dealer where you purchased the product. They are prepared to assist you with

competent and uncomplicated advice and praccal support.

If perhaps a few screws were missing or you might have a queson that can’t be answered by

this manual, please do not hesitate to contact us directly by e-mail.

Likewise, we would appreciate your suggesons and comments about our case very much. Our

sta will respond to all inquiries quickly and professionally.

Customers from Germany and other European countries can use the following e-mail address

for support quesons, spare parts or warranty issues:

support@nanoxia-world.com

Customers from Africa, Asia, Australia as well as North and South America can use the fol-

lowing e-mail address for support quesons, spare parts or warranty issues:

support.overseas@nanoxia-world.com

For general inquiries, comments, suggesons and the like please refer to:

info@nanoxia-world.com

We are sure that you will be sased with Nanoxia Deep Silence 3 for many years to come, so

please enjoy your new PC case.

Your Nanoxia Support-Team

Nanoxia Deep Silence 3 Specification

Brand: Nanoxia

Model: Deep Silence 3

Category: Computer cases

Type: Specification

Download PDF

report

Nanoxia Deep Silence 3 Specification

Nanoxia Deep Silence 3 Specification

Related papers

Other documents