SilverStone KL05 Specification

Brand: SilverStone

Model: KL05

Category: Computer cases

Type: Specification

SilverStone KL05 is an all-accommodating ATX tower designed especially for liquid cooling. This high-quality tower comes with an interference-free design that is capable of mounting either a 240mm or 280mm radiator, offering excellent cooling capabilities for your system. The KL05 also features a highly flexible storage accommodation that can house up to 8 or 11 drives, providing ample space for all your storage needs. The KL05 comes with a quick access filter, making it a breeze to clean and maintain.

NO:G11222700

Warranty Information

This product has a limited 1 year warranty in North America and Australia.

For information on warranty periods in other regions, please contact your reseller or SilverStone authorized distributor.

1. Product component defects or damages resulted from defective production is covered under warranty.

Defects or damages with the following conditions will be fixed or replaced under SilverStone Technology’s jurisdiction.

a) Usage in accordance with instructions provided in this manual, with no misuse, overuse, or other inappropriate actions.

b) Damage not caused by natural disaster (thunder, fire, earthquake, flood, salt, wind, insect, animals, etc…)

c) Product is not disassembled, modified, or fixed. Components not disassembled or replaced.

d) Warranty mark/stickers are not removed or broken.

Loss or damages resulted from conditions other than ones listed above are not covered under warranty.

2. Under warranty, SilverStone Technology’s maximum liability is limited to the current market value for the product (depreciated value, excluding

shipping, handling, and other fees). SilverStone Technology is not responsible for other damages or loss associated with the use of product.

3. Under warranty, SilverStone Technology is obligated to repair or replace its defective products. Under no circumstances will SilverStone

Technology be liable for damages in connection with the sale, purchase, or use including but not limited to loss of data, loss of business, loss of

profits, loss of use of the product or incidental or consequential damage whether or not foreseeable and whether or not based on breach of warranty,

contract or negligence, even if SilverStone Technology has been advised of the possibility of such damages.

4. Warranty covers only the original purchaser through authorized SilverStone distributors and resellers and is not transferable to a second hand

purchaser.

5. You must provide sales receipt or invoice with clear indication of purchase date to determine warranty eligibility.

6. If a problem develops during the warranty period, please contact your retailer/reseller/SilverStone authorized distributors or SilverStone

http://www.silverstonetek.com.

Please note that: (i) You must provide proof of original purchase of the product by a dated itemized receipt; (ii) You shall bear the cost of shipping

(or otherwise transporting) the product to SilverStone authorized distributors. SilverStone authorized distributors will bear the cost of shipping

(or otherwise transporting) the product back to you after completing the warranty service; (iii) Before you send the product, you must be issued a

Return Merchandise Authorization (“RMA”) number from SilverStone. Updated warranty information will be posted on SilverStone’s official website.

Please visit http://www.silverstonetek.com for the latest updates.

Warranty terms & conditions

Additional info & contacts

For North America ([email protected])

SilverStone Technology in North America may repair or replace defective product with refurbished product that is not new but has been functionally tested.

Replacement product will be warranted for remainder of the warranty period or thirty days, whichever is longer. All products should be sent

back to the place of purchase if it is within 30 days of purchase, after 30 days, customers need to initiate RMA procedure with SilverStone Technology

in USA by first downloading the “USA RMA form for end-users” form from the below link and follow its instructions.

http://silverstonetek.com/contactus.php

For Australia only ([email protected])

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law.

You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage.

You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

Please refer to above “Warranty terms & conditions” for further warranty details.

SilverStone Technology Co., Ltd. 12F No. 168 Jiankang Rd., Zhonghe Dist., New Taipei City 235 Taiwan R.O.C. + 886-2-8228-1238

(standard international call charges apply)

For Europe ([email protected])

For all other regions ([email protected])

Model No.

Material

Motherboard

Drive Bay

Cooling System

Expansion Slot

Front I/O Port

Power Supply

Expansion Card

Limitation of CPU cooler

Limitation of PSU

Dimension

Extra

SST-KL05B-W , SST-KL05B-Q

Mesh front panel, steel body (SST-KL05B-W), Plastic front panel, steel body (SST-KL05B-Q)

ATX , Micro ATX

External 5.25” x 2

Internal 3.5" x 6 or 2.5” x 6 , 2.5” x 2

Front 2 x 120mm/140mm fan slot (1 x 120mm intake fan included)

Rear 120mm fan slot x 1

Top 120mm / 140mm fan slot x 2

Bottom 120mm fan slot x 2

USB 3.0 x 2 / Audio x 1 / MIC x 1

Optional Standard PS2 (ATX)

Compatible up to 16”

11” with optional drive cage (sold separately) installed

165mm

225mm

200mm (W) x 525mm (H) x 494mm (D), 52L

Support Kensington locks

Interference-free design for mounting 240mm or 280mm radiator

Highly flexible storage accommodation of up to 8 or 11 drives*

Quick access filters for easy cleaning

Motherboard back plate opening for quick CPU cooler assembly

Mesh front panel intake maximizes airflow with side window for viewing system innards (KL05-W)

Front-side intake vents with foam padded side panels to minimize noise (KL05-Q)

All black painted interior for stylish look

*Requires purchase of additional drive cage

Special Features

Specifications

An all accommodating ATX tower designed for liquid cooling

KL05-W

KL05-Q

Remove the front panel as indicated

in the diagram

Frontblende wie abgebildet entfernen

Retirez le panneau frontal comme

indiqué dans le diagramme

Retire el panel frontal como se indica

en el diagrama

Rimuovere il pannello frontale come

indicato nella figura

Снимите лицевую панель,

как показано на рисунке

請依圖示由面板正面取下擋版

図示されるようにフロントパネル

を取り外します

그림과 같이 전면 패널을 분리합니다

请依图示由面板正面取下挡版

Install your 3.5”or 2.5” drive into the tray

and secure with screws

Installieren Sie Ihr 3,5- oder 2,5-Zoll-Laufwerk im

Schacht und sichern Sie es mit Schrauben.

Installez votre lecteur de disque 3,5" ou 2,5" dans le

plateau et vissez avec les vis.

Instale su dispositivo de 3,5” ó 2,5” en la bandeja y

asegúrelo con tornillos.

Installare il disco da 3,5” o 2,5” nell'alloggio e fissare

con viti.

Установите 3,5-дюймовый или 2,5-дюймовый диск

в лоток и закрепите винтами.

放入3.5”或2.5”硬碟，並鎖上螺絲固定

3.5”または2.5”ドライブをトレイに設置し、

ネジで固定します。

3.5”또는 2.5” 드라이브를 트레이에 설치하고

나사로 고정합니다.

放入3.5“或2.5”硬碟，并锁上螺丝固定

Pull the tab of tool-less bracket outward.

Nase der Halterung nach außen ziehen (kein

Werkzeug erforderlich)

Tirez l'onglet du support sans outil vers l'extérieur

Tire de la pestaña del bracket sin herramientas

hacia fuera.

Tirare verso l'esterno la linguetta della staffa

ad incastro

Потяните фиксатор кронштейна наружу.

將免工具支架往外扳開

ツール不要ブラケットのタブを外側へ引きます。

공구 사용이 필요 없는 브래킷의 끝부분을 바깥쪽으로

당겨 뺍니다.

将免工具支架往外扳开

Install your 2.5” drive into the tray and secure

with screws from bottom or both sides.

Installieren Sie Ihr 2,5-Zoll-Laufwerk im Schacht

und sichern Sie es von der Unterseite oder

beiden Seiten mit Schrauben.

Installez votre lecteur de disque 2,5" dans le

plateau et vissez avec les vis par dessous ou

par les deux cotés.

Instale su dispositivo de 2,5” en la bandeja y

asegúrelo con tornillos desde el fondo o desde

ambos lados.

Installare il disco da 2,5” nell'alloggio e fissare

con viti dal basso o da entrambi i lati.

Установите 2,5-дюймовый диск в лоток и

закрепите винтами снизу или с боков.

兩側或底部鎖上螺絲固定

2.5”ドライブをトレイに設置し、底部または両

サイドからネジで固定します

2.5” 드라이브를 트레이에 고정하고 바닥 또는

양쪽에서 나사로 고정합니다.

两侧或底部锁上螺丝固定

Remove the hard drive tray as indicated

in the diagram.

Entfernen Sie die Festplattenhalterung wie

in der Abbildung gezeigt.

Retirez le plateau du lecteur tel qu’illustré.

Retire la bandeja para discos duros como

se indica en el diagrama.

Rimuovere il cassetto del disco rigido come

indicato nella figura.

Снимите лоток привода жесткого диска,

как показано на рисунке.

請依圖示將硬碟拖盤取出，然後放入2.5”硬碟

図示されるようにハードディスクドライブト

レイを取り外します。

그림과 같이 하드 드라이브 브래킷을 분리합니다.

请依图示将硬碟拖盘取出，然后放入2.5“硬碟

Remove the hard drive tray as indicated

in the diagram.

Entfernen Sie die Festplattenhalterung wie in der

Abbildung gezeigt.

Retirez le plateau du lecteur tel qu’illustré.

Retire la bandeja para discos duros como se indica

en el diagrama.

Rimuovere il cassetto del disco rigido come indicato

nella figura.

Снимите лоток привода жесткого диска,

как показано на рисунке.

請依圖示將硬碟拖盤取出

図示されるようにハードディスクドライブト

レイを取り外します。

그림과 같이 하드 드라이브 브래킷을 분리합니다.

请依图示将硬碟拖盘取出

PICTURE ITEM

SCREW-P/W-M3*4-BK

MESH

FRONT DOOR

12025 FAN X 2 (OPTION) OR

14025 FAN X 2 (OPTION)

12025 FAN X 1 (OPTION)

PS / 2 PSU (OPTION)

12025 FAN X 2 (OPTION)

3.5” HDD TRAY X 6 OR 2.5” X 6

12025 FAN X 2 OR

14025 FAN X 2 (OPTION)

RESET BUTTON

POWER BUTTON

POWER LED

USB3.0 X 2 + SPK + MIC

5.25” DRIVE BAY X 2

SCREW-I-6-32*5-BK

STANDOFF-6-32*6.5H-6-32

STANDOFF-SOCKET-WRENCH

BUNCH-WIRE-TIES

SECURE 2.5” HDD

SECURE PSU, MB, 3.5”HDD

SUPPORT MB

STANDOFF SCREWS

CABLE MANAGEMENT

PURPOSE

TOP COVER

LEFT SIDE PANEL

RIGHT SIDE

PANEL

LEFT SIDE PANEL

WITH WINDOW

2.5” DRIVE BAY X 2

Install your optical drive or 5.25” device as indicated

in the diagram. (Insert your optical drive or 5.25” device

externally to align with the panel and secure the device

with tool-less lock.)

Installieren Sie das optische Laufwerk oder

5,25-Zoll-Gerät wie in der Abbildung angegeben.

(Setzen Sie Ihr optisches Laufwerk oder externes

5,25-Zoll-Gerät bündig zur Blende ein, fixieren Sie

das Gerät mit dem werkzeuglosen Verschluss.)

Installez votre lecteur optique ou un périphérique 5,25"

comme indiqué dans l'illustration. (Insérez votre disque

optique ou votre appareil de 5,25” en externe pour

aligner avec le panneau et fixer l'appareil avec le

verrouillage sans outil.)

Instale su dispositivo óptico ó dispositivo de 5,25”

como se indica en el diagrama. (Inserte su dispositivo

óptico ó dispositivo de 5,25” externamente para

alinearlo con el panel y fije el dispositivo con el cierre

sin herramientas.)

Installare l'unità ottica o il dispositivo da 5.25" come

indicato nello schema. (Inserire l'unità ottica o l’unità

da 5.25 " esternamente per allinearla con il pannello

e fissare il dispositivo con la serratura ad incastro.)

Установите оптический привод или 5,25-дюймовое

устройство, как показано на схеме. (Установите оптический

привод или 5,25-дюймовое устройство снаружи, выровняв

его с панелью и закрепив фиксатором без использования

каких-либо дополнительных инструментов)

依圖示安裝你的光碟機或5.25吋裝置

(由外部將光碟機推入機身與面板平齊，扣具會

自動扣上)

図のように、光学ドライブまたは5.25”デバイスを

インストールします。 (光学ドライブまたは5.25”

デバイスを外側から入れてパネルに合わせてから、

ツール不要ロックでデバイスを固定します。)

광드라이브나 5.25" 장치들을 그림과 같이 설치하십시오.

(광드라이브 또는 5.25” 장치를 외부에서 삽입한 후 장치를

패널과 정렬하고 이를 공구가 필요없는 잠금장치로

고정하십시오.)

依图示安装你的光碟机或5.25吋装置

（由外部将光碟机推入机身与面板平齐，扣具会

自动扣上）

SSD Install

HDD Install

CDR Install

SilverStone KL05 Specification

Brand: SilverStone

Model: KL05

Category: Computer cases

Type: Specification

Download PDF

report

SilverStone KL05 Specification

SilverStone KL05 Specification

Related papers

Other documents