Philips 32PFL5605S/98 User manual
- Category
- LCD TVs
- Type
- User manual
This manual is also suitable for
Register your product and get support at
www.philips.com/welcome
32PFL5605/98
40PFL5605/98
46PFL5605/98
32PFL5605S/98
40PFL5605S/98
46PFL5605S/98
EN
User manual
EN Addendum
You cannot play mp4 video fi les
that use the H.264 or AVC codec.
FR Addenda
La lecture de fi chiers vidéo MP4
utilisant le codec H.264 ou AVC
n’est pas prise en charge.
TH ภาคผนวก
คุณไม่สามารถเล่นไฟล์วิดีโอ MP4 ที่
เข้ารหัสแบบ H.264 หรือ AVC ได้
VI Phụ lục
Bạn không thể phát các tập tin
video MP4 sử dụng bộ giải mã
AVC hoặc H.264.
ZH-CN 附录
您无法播放使用 H.264 或
AVC 编解码器的 MP4 视频文
件。
ZH-HK 附錄
您無法播放使用 H.264 或
AVC 編碼的 MP4 影像檔。
1
7 Connect devices 23
Back connectors 23
Bottom connectors 23
Side connectors 23
Connect a computer 24
Add devices 24
Use Philips EasyLink 25
Use a Kensington lock 26
8 Product information 27
Supported display resolutions 27
Tuner/Reception/Transmission 27
Multimedia 27
Remote control 27
Power 27
Supported TV mounts 27
9 Troubleshooting 29
General TV issues 29
TV channel issues 29
Picture issues 29
Sound issues 30
HDMI connection issues 30
Computer connection issues 30
Contact us 30
10 Index 31
Contents
1 Notice 2
2 Important 3
3 Your TV 5
Side controls and indicators 5
Remote control 5
4 Use your TV
Adjust TV volume 9
Use teletext 9
5 Use more of your TV 10
Access TV menus 10
Change picture and sound settings 10
Use advanced teletext features 13
Create and use lists of favourite channels 14
Use timers 15
Use child control 15
Use the TV clock 16
View photos, play music and watch video
from a USB storage device 16
Use Scenea to display a picture as TV
Update the TV software 19
Change TV preferences 19
Start a TV demo 20
Reset the TV to factory settings 20
6 Install channels 21
Automatically install channels 21
Manually install channels 21
Rename channels 21
Reorder channels 22
English
EN
2
Compliance with EMF
Koninklijke Philips Electronics N.V. manufactures
and sells many products targeted at consumers
which, like any electronic apparatus, in
general have the ability to emit and receive
electromagnetic signals.
One of Philips’ leading Business Principles is to
take all necessary health and safety measures
for our products, to comply with all applicable
legal requirements and to stay well within
the Electro Magnetic Field (EMF) standards
applicable at the time of producing the
products.
Philips is committed to develop, produce and
market products that cause no adverse health
handled properly for their intended use, they
available today.
Philips plays an active role in the development
of international EMF and safety standards,
enabling Philips to anticipate further
developments in standardisation for early
integration in its products.
Copyright
Multimedia Interface are trademarks or
registered trademarks of HDMI licensing LLC in
the United States and other countries.
Kensington and Micro Saver are registered US
trademarks of ACCO World corporation with
issued registrations and pending applications in
other countries throughout the world.
All other registered and unregistered
trademarks are the property of their respective
owners.
Portions of this software are copyright © The
FreeType Project (www.freetype.org).
1 Notice
2010 Koninklijke Philips Electronics N.V. All
rights reserved.
notice. Trademarks are the property of
Koninklijke Philips Electronics N.V. or their
respective owners. Philips reserves the right
to change products at any time without being
obliged to adjust earlier supplies accordingly.
The material in this manual is believed
adequate for the intended use of the system.
If the product, or its individual modules or
procedures, are used for purposes other than
validity and suitability must be obtained. Philips
warrants that the material itself does not
infringe any United States patents. No further
warranty is expressed or implied.
Philips cannot be held responsible either for any
errors in the content of this document or for
any problems as a result of the content in this
document. Errors reported to Philips will be
corrected and published on the Philips support
website as soon as possible.
Pixel characteristics
This LCD product has a high number of
colour pixels. Although it has effective pixels of
99.999% or more, black dots or bright points of
light (red, green or blue) may appear constantly
on the screen. This is a structural property of
the display (within common industry standards)
and is not a malfunction.
Warranty
No components are user serviceable. Do not
open or remove covers to the inside of the
product. Repairs may only be done by Philips
to do so shall void any warranty, stated or
implied.
Any operation expressly prohibited in
this manual, any adjustments, or assembly
procedures not recommended or authorised in
this manual, shall void the warranty.
EN
3
When stand mounting the TV, use only
the supplied stand. Secure the stand to
surface that can support the combined
weight of the TV and the stand.
When wall mounting the TV, use only a
wall mount that can support the weight of
the TV. Secure the wall mount to a wall
that can support the combined weight of
the TV and wall mount. Koninklijke Philips
Electronics N.V. bears no responsibility
for improper wall mounting that result in
accident, injury or damage.
Risk of injury to children!
Follow these precautions to prevent the
TV from toppling over and causing injury to
children:
Never place the TV on a surface covered
by a cloth or other material that can be
pulled away.
Ensure that no part of the TV hangs over
the edge of the surface.
Never place the TV on tall furniture (such
as a bookcase) without anchoring both
the furniture and TV to the wall or a
suitable support.
Educate children about the dangers of
climbing on furniture to reach the TV.
Risk of swallowing batteries!
The product/remote control may
contain a coin-type battery, which can be
swallowed. Keep the battery out of reach
of children at all times!
Risk of overheating!
Always leave a space of at least 4 inches
or 10 cm around the TV for ventilation.
Ensure curtains or other objects never
cover the ventilation slots on the TV.
Risk of damage to the TV!
Before you connect the TV to the power
outlet, ensure that the power voltage
matches the value printed on the back
of the TV. Never connect the TV to the
power outlet if the voltage is different.
2 Important
Read and understand all instructions before you
use your TV. If damage is caused by failure to
follow instructions, the warranty does not apply.
Safety
Never expose the TV to rain or water.
Never place liquid containers, such as
vases, near the TV. If liquids are spilt on
or into the TV, disconnect the TV from
the power outlet immediately. Contact
Philips Consumer Care to have the TV
checked before use.
Never place the TV, remote control or
sources, including direct sunlight.
TV, remote control and batteries at all
times.
Never insert objects into the ventilation
slots or other openings on the TV.
When the TV is swivelled ensure that
no strain is exerted on the power cord.
Strain on the power cord can loosen
connections and cause arcing.
Never expose the remote control or
batteries to rain, water or excessive heat.
Avoid force coming onto power plugs.
Loose power plugs can cause arcing or
Risk of injury or damage to the TV!
Two people are required to lift and carry
a TV that weighs more than 25 kg or 55
lbs.
English
EN
4
Disposal of your old product and
batteries
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
When this crossed-out wheeled bin symbol
is attached to a product it means that the
product is covered by the European Directive
2002/96/EC. Please inform yourself about the
local separate collection system for electrical
and electronic products.
Please act according to your local rules and
do not dispose of your old products with your
normal household waste.
Correct disposal of your old product helps to
prevent potential negative consequences for
the environment and human health.
Your product contains batteries covered by
the European Directive 2006/66/EC, which
cannot be disposed of with normal household
waste.
Please inform yourself about the local rules
on separate collection of batteries because
correct disposal helps to prevent negative
consequences for the environment and human
health.
Never place the TV or any objects on the
power cord.
To easily disconnect the TV power cord
from the power outlet, ensure that you
have full access to the power cord at all
times.
When you disconnect the power cord,
always pull the plug, never the cable.
Disconnect the TV from the power
outlet and antenna before lightning
storms. During lightning storms, never
touch any part of the TV, power cord or
antenna cable.
Risk of hearing damage!
Avoid using earphones or headphones at
high volumes or for prolonged periods of
time.
Low temperatures
If the TV is transported in temperatures
below 5°C or 41°F, unpack the TV and
wait until the TV temperature matches
room temperature before connecting the
TV to the power outlet.
Screen care
Avoid stationary images as much as
possible. Stationary images are images
that remain on-screen for extended
periods of time. Examples include:
on-screen menus, black bars and time
displays. If you must use stationary
images, reduce screen contrast and
brightness to avoid screen damage.
Unplug the TV before cleaning.
Clean the TV and frame with a soft,
damp cloth. Never use substances such as
alcohol, chemicals or household cleaners
on the TV.
Risk of damage to the TV screen! Never
touch, push, rub or strike the screen with
any object.
To avoid deformations and colour fading,
wipe off water drops as soon as possible.
EN
5
Remote control
1
29
2
3
7
8
9
10
11
14
15
18
21
19
16
17
28
25
24
22
23
26
13
12
4
5
6
27
20
3 Your TV
Congratulations on your purchase, and
support that Philips offers, register your TV at
www.philips.com/welcome.
This section gives you an overview of
commonly used TV controls and functions.
Side controls and indicators
a +/-: Increases or decreases volume.
b
: Selects connected devices.
c P/CH +/-: Switches to the next or
previous channel.
d
Power switch: Switches the TV on or
off.
e
Ambient sensor/ Standby indicator/
Remote control sensor
5
2
1
3
4
English
EN
6
p (Stop)
Stops disc play.
q
(Mute)
Mutes or restores volume.
r
CH +/- (Channel +/-)
Switches to the next or previous channel.
s
FORMAT
Selects a picture format.
t
0-9 (Numeric buttons)
Selects a channel or setting.
u
PICTURE (Smart picture)
Launches the smart picture menu.
v
SOUND (Smart Sound)
Launches the smart sound menu.
w
+/- (Volume +/-)
Increases or decreases volume.
x
BACK A/CH
Returns to a previous screen.
Toggles between the current channel and
the last viewed channel.
y
BROWSE
Displays a matrix of channels.
z
SCENEA (Wallpaper)
Displays wallpaper on your TV screen.
{
DEMO
Toggles the demonstration menu on or
off.
|
TV
Switches back to the antenna source from
EasyLink mode.
}
INCR. SURR
Enables Incredible Surround for stereo
sources. Enables spatial mode for mono
sources.
a
(Standby-On)
Switches the TV to standby if it is on.
Switches on the TV if it is in standby.
b
TELETEXT
Toggles teletext on or off.
c
SOURCE
Selects connected devices.
d
Colour buttons
Select tasks, options or teletext pages.
Available in selected models only.
e
SLEEP
Sets a delay after which the TV switches
to standby.
f
DUAL
Switches Stereo and Nicam Stereo to
or second language (Dual II) in bilingual
programmes.
g
(Home)
Toggles the home menu on or off.
h
OPTIONS
Accesses options relating to the current
activity or selection.
i
OK
matrix of channels.
j
(Navigation buttons)
Navigate menus.
k
INFO
Displays programme information, if
available.
l
(Backward)
Searches backward.
m
(Forward)
Searches forward.
n
(Play/Pause)
Starts, pauses or resumes disc play.
o
(Record)
Starts or stops video recording.
EN
7
Remote control usage
When using the remote control, hold it close
to the TV and point it at the remote control
sensor. Make sure that the line-of-sight
between the remote control and TV is not
blocked by furniture, walls or other objects.
~5m
~30˚
English
EN
Switch channels
Press BACK A/CH on the remote
control to return to the previously
viewed channel.
Press CH +/- on the remote control or
P/CH +/- on the side of the TV.
Press OK to use the channel matrix.
Enter a channel number using the
Numeric buttons.
Note
When you use a favourite list, you can only
select those channels in the list.
Watch connected devices
Use the source button
1 Press SOURCE.
» The source list appears.
2 Press or to select the connected
device.
3 Press OK to watch the connected device.
4 Use your TV
This section helps you perform basic TV
operations (see ‘Use more of your TV’ on page
10).
Switch your TV on/off or to
standby
To switch on
If the standby indicator is off, press Power
switch at the bottom of the TV.
If the standby indicator is red, press
(Standby-On) on the remote control.
To switch to standby
Press
(Standby-On) on the remote
control.
» The standby indicator switches to red.
To switch off
Press the Power switch at the bottom of
the TV.
» The standby indicator switches off.
Tip
Though your TV consumes very little power
when in standby, energy continues to be
consumed. When not in use for an extended
period of time, disconnect the TV power cable
from the power outlet.
EN
9
Use teletext
1
Press TELETEXT.
» The main index page appears.
2 Select a page as follows:
Press the Numeric buttons to enter
a page number.
Press CH +/- or
to view the
next or previous page.
Press the Colour buttons to select a
colour coded item.
Pressing
BACK to return to the
previously viewed page.
3 Press TELETEXT to exit teletext.
Use the home menu
Note
You can add new devices to the home menu
for easy access.
1 Press (Home).
» The home menu appears.
2 Press to select the device.
3 Press OK to watch the connected device
on your TV.
Adjust TV volume
To increase or decrease volume
Press
+/- on the remote control or at
the side of the TV.
To mute or unmute sound
Press
to mute the sound.
Press
again to restore the sound.
English
EN
10
4 Press (Home) to exit.
Tip
After selecting [Add new device], follow the
on-screen instructions to select the correct
device and connector.
Remove devices from the home menu
If a device is no longer connected to the TV,
remove it from the home menu.
1 Press (Home).
2 Press to select a device to
remove.
3 Press OPTIONS.
» The [Remove device] list appears.
4 Press OK and select [Remove] to remove
the device.
» The selected device is removed from
the home menu.
Change picture and sound
settings
Change picture and sound settings to suit your
or change settings manually.
Use settings assistant
Use the settings assistant to guide you through
the picture and sound settings.
1 Press (Home).
2 Press to select [Setup] >
[Picture] >[Settings assistant] .
3 Press OK.
» The [Settings assistant] menu appears.
Follow the on-screen instructions to
choose your preferred picture settings.
5 Use more of
your TV
Access TV menus
Menus help you to install channels, change
picture and sound settings and access other
features.
Access the home menu
The home menu gives you easy access to
connected devices, picture and sound settings,
and other useful features.
1 Press (Home).
» The menu screen appears.
2 Press the to select and navigate
through one of the following menus.
[Watch TV] : Switches back to the
aerial source if another source is
selected.
[Setup] : Accesses menus to change
picture, sound and other settings.
[Add new device] : Adds new
devices to the home menu.
3 Press OK
Add new device
Setup
Watch TV
EN
11
[Noise reduction] : Filters and reduces
noise in an image.
[Colour temp.] : Sets the colour tones
to [Normal],[Warm] (reddish) or [Cool]
(bluish).
[Pixel Plus HD] : Fine-tunes each pixel to
match surrounding pixels. This produces a
[HD Natural Motion] : In selected
smoothly. You can switch HDNM on
or off.
[100Hz Clear LCD] : Sets the
TV refresh rate to a maximum of
100Hz to provide superior motion
sharpness, better black level, high
image and a larger viewing angle.
[Dynamic contrast] : Enhances
contrast.
[Dynamic backlight] : Adjusts
brightness of the TV backlight to
match lighting conditions.
[Colour enhancement] : Makes
colours more vivid and improves
the details in bright colours. You can
switch this feature on or off.
[Backlight] : Adjusts the backlight.
[PC mode] : Adjusts picture settings
when a PC is connected to the TV.
[Light sensor] : Adjusts settings
dynamically to match lighting conditions.
[Picture format] : Changes the picture
format.
[Horizontal shift] : Adjusts the picture
horizontally for PC-VGA or HD input.
[Vertical shift] : Adjusts the picture
vertically for PC-VGA or HD input.
Use smart picture
picture settings.
1 Press PICTURE.
» The [Smart picture] menu appears.
2 Press to select one of the following
smart picture settings.
[Personal] : Lists customised picture
settings.
[Vivid] : Applies rich and dynamic
settings.
[Standard] : Adjusts picture settings
to suit most environments and types
of video.
[Movie] : Applies settings for movie
viewing.
[Game] : Applies settings for games.
[Energy saving] : Applies low-energy
settings.
3 Press OK
» The selected smart picture setting is
applied.
Manually adjust picture settings
1 Press (Home).
2 Press to select [Setup] >
[Picture].
» The [Picture] menu appears.
3 Press to select from the following
settings and adjust:
[Smart picture]
smart picture settings.
[Contrast] : Adjusts the intensity of bright
areas, keeping dark areas unchanged.
[Brightness] : Adjusts the intensity and
details of dark areas.
[Colour] : Adjusts colour saturation.
[Hue] : Compensates for colour
variations. (Available only during video
playback.)
[Sharpness] : Adjusts sharpness in the
image.
English
EN
12
[Super zoom] : (Not
for HD and PC mode.)
Removes the black bars on
the side of 4:3 broadcasts.
There is minimal
distortion.
[4:3] : Shows the classic
4:3 format.
[Movie expand 16:9]
: (Not for HD and PC
mode.) Scales 4:3 format
to 16:9.
[Wide screen] : Scales 4:3
format to 16:9.
[Unscaled] : For HD
and PC mode only,
and in selected models
only. Allows maximum
sharpness. Some
distortion may be present
due to the broadcaster’s
systems. Set your PC
resolution to wide screen
mode for best results.
Use smart sound
settings.
1 Press SOUND.
» The [Smart sound] menu appears.
2 Press to select one of the following
smart sound settings.
[Standard] : Adjusts sound settings
to suit most environments and types
of audio.
Change picture format
1 Press FORMAT.
» A picture format bar appears.
2 Press to select a picture format.
» The selected picture format is
activated.
3 Press OK
Summary of picture formats
The following picture settings can be
Note
Depending on the format of the picture
source, some picture settings are not available.
EN
13
Use advanced teletext
features
Access the teletext options menu
Access the teletext features through the
teletext options menu.
1 Press TELETEXT.
» The teletext screen appears.
2 Press OPTIONS.
» The teletext options menu appears.
3 Press to select one of the following
options.
[Freeze page] : Freezes the current
page.
[Dual/Full screen] : Enables and
disables dual screen teletext.
[Reveal] : Hides or reveals hidden
information on a page, such as
solutions to riddles or puzzles.
[Cycle subpage] : Cycles through
subpages automatically if subpages
are available.
[Language] : Switches to a different
language group to display a language
correctly when it uses a different
character set.
4 Press OK
5 Press TELETEXT to exit the teletext
options menu.
Select teletext subpages
A teletext page can hold several subpages.
Subpages are displayed on a bar next to the
main page number.
1 Press TELETEXT.
» The teletext screen appears.
2 Select a teletext page with subpages.
3 Press to enter a subpage.
» The subpage appears.
4 Press to switch between subpages.
[News] : Applies settings for spoken
audio, such as news.
[Movie] : Applies settings for movies.
[Personal] : Applies the settings that
were customised in the sound menu.
3 Press OK
» The selected smart sound setting is
applied.
Manually adjust sound settings
1 Press (Home).
2 Press to select [Setup] > [Sound].
» The [Sound] menu appears.
3 Press to select and adjust:
[Smart sound] : Accesses pre-
[Bass] : Adjusts the bass level.
[Treble] : Adjusts the treble level.
[Volume] : Adjusts the volume.
[Balance] : Adjusts the balance of the
right and left speakers.
[Dual I-II] : Selects audio languages if
dual sound broadcast is available.
[Mono/Stereo] : Selects mono
or stereo if stereo broadcast is
available.
[TV speakers] : Sets the TV speakers
on or off, or outputs sound to an
EasyLink-compliant device. This
option is available when you select
[EasyLink] in the [Preferences]
menu.
[Surround] : Enables spatial sound.
[Auto volume] : Automatically
reduces sudden volume changes, for
example, when switching channels.
[Delta volume] : Corrects volume
differences between TV channels
and connected devices (switch
to your connected device when
adjusting [Delta volume]).
English
EN
14
Add a channel to the favourite list
Tip
View all channels before adding a channel to
the favourite list.
1 When watching TV, switch to the channel
you want to add to a favourite list.
2 Press to select a channel to add
to the favourite list.
3 Press OPTIONS.
» The channel options menu appears.
4 Press to select [Mark as favourite].
5 Press OK.
» The channel is added to the favourite
list.
6 Press BACK to exit.
Tip
When watching TV, press OPTIONS
> [Mark as favourite] to save the current
channel in the favourite list.
Remove a channel from the favourite
list
Note
Select the favourite list to edit, before
removing a channel (see ‘Select the favourite
list’ on page 14).
1 When watching TV, press OK to display
the channel grid.
2 Press OPTIONS.
» The channel options menu appears.
3 Press to select [Unmark as fav.].
4 Press OK.
» The channel is removed from the
favourite list.
5 Press BACK to exit.
Select T.O.P. teletext broadcasts
Table Of Pages (T.O.P.) teletext broadcasts
allow you to jump from one subject to
another without using page numbers. T.O.P.
teletext is not broadcast on all TV channels.
1 Press TELETEXT.
» The teletext screen appears.
2 Press INFO.
» The T.O.P. overview appears.
3 Press to select a subject.
4 Press OK to view the page.
Create and use lists of
favourite channels
You can create a list of your preferred TV
easily.
Select the favourite list
1 When watching TV, press OK to display
the channel grid.
2 Press OPTIONS.
» The channel options menu appears.
3 Press OK to select [Show fav. ch.].
4 Press to select the favourites list or
[All].
5 Press OK.
» If you select the favourites list, only the
channels in the favourites list appear in
the channel grid.
» If you select [All], all the installed
channels appear in the channel grid.
6 Press BACK to exit the menu.
EN
15
8 Press OK
9 Press BACK to exit.
Tip
Select [On timer] > [Activate] > [Off] to
disable [On timer].
When [On timer] is [Off], only [Activate] can
be selected.
Set the TV clock before activating [On
timer]feature.
Use child control
You can prevent your children from watching
certain programs or certain channels by locking
the TV controls.
Set or change your PIN code
1 Press (Home).
2 Press to select [Setup] >
[Features] > [Change/Set code].
» The [Change/Set code] menu appears.
3 Enter the code with the Numeric
buttons.
»
your code is created or changed.
Tip
override any existing codes.
Lock or unlock the TV
Lock the TV to prevent access to all channels
and connected devices.
1 Press (Home).
2 Press to select [Setup] >
[Features] > [TV lock].
» A screen appears prompting you to
enter a code.
3 Enter your code using Numeric buttons.
Use timers
You can set timers to switch the TV to standby
Automatically switch the TV to
standby (sleep timer)
Sleep timer switches the TV to standby after a
Tip
You can always switch off your TV earlier or
reset the sleeptimer during the countdown.
1 Press (Home).
2 Press to select [Setup] >
[Features] > [Sleep timer].
» The [Sleep timer] menu appears.
3 Press to select a value between zero
» If set to zero minutes, the sleep timer
is switched off.
4 Press OK to activate the sleep timer.
» The TV switches to standby after the
Automatically switch the TV on (on
timer)
You can switch on the TV from standby to a
1 Press (Home).
2 Press to select [Setup] >
[Features] > [On timer].
3 Press to select [Activate] and set
a frequency -[Daily], [Once], or [Off].
4 Press OK
5 Press to select [Time] and set the
starting time.
6 Press [Done]
7 Press to select [Programme no.]
and set the channel.
English
EN
16
Display the TV clock
1 When watching TV, press OPTIONS.
» The TV options menu appears.
2 Select [Clock].
3 Press OK.
» The clock is displayed.
Note
seconds.
Set the TV clock again if you have switched
off/on your TV using the power switch.
View photos, play music and
watch video from a USB
storage device
Caution
Philips is not responsible if the USB storage
device is not supported, nor is it responsible
for damage or loss of data from the device.
Your TV has a USB connector that enables you
to view photos, listen to music or watch movies
stored on a USB storage device.
Playback type
Pictures JPEG (non-progressive
only)
Music MP3
Video MP4, RM
Note
Only FAT or DOS-formatted USB storage
devices are supported. File names must not
4 Press to select [Lock] or [Unlock].
5 Press OK.
» All channels and connected devices are
locked or unlocked.
Note
If you select [Lock], you have to enter your
code every time you turn on your TV.
Lock or unlock one or more channels
1 When watching TV, press OK to display
the channel grid.
2 Press to select a channel to lock
or unlock.
3 Press OPTIONS.
4 Press to select [Lock channel] or
[Unlock channel].
5 For each selection, press OK to lock or
unlock the channel.
Note
Restart the TV for the change to take effect.
Use the TV clock
You can display a clock on the TV screen.
Set the TV clock
1 Press (Home).
2 Press to select [Setup]
3 Select [Features] > [Clock] and press
OK.
» The [Clock] setup appears.
4 Enter the time with the Numeric
buttons.
5 Select [Done], then press OK.
» The time has been set.
6 To return to watching TV, press twice.
EN
17
View a slide show of your photos
1 When a full screen image of a photo is
displayed, press OK or
.
» A slide show begins from the selected
image.
2 Press:
OK or
to pause the slide show.
» The
icon appears.
Press
or to move between
images.
Press BACK or
to stop the slide
show.
Change slide show settings
1 When viewing a slide show, press
OPTIONS.
» The slide show options menu appears.
2 Press to select one of the following.
[Start/Stop slide.] : Starts or stops a
slide show.
[Slideshow trans.] : Sets the
transition from one picture to the
next.
[Slideshow freq.] : Sets the amount
of time that a picture is shown.
[Rotate image] : Rotates a picture.
[Set as wallpaper] : Sets the image as
wallpaper.
[Show info] : Displays the picture
name, date and size of the picture in
the slide show.
3 Press OK
Note
[Rotate image] and [Show info] appear only
when you press OK or
to pause the slide
show.
Listen to music
1 Connect a USB storage device to the TV.
2 Press to enter the menu.
3 Select [Music], and then press to enter
the [Music] folder.
Browse the USB storage device
1 Turn on the TV.
2 Connect the USB storage device to the
TV.
3 Press (Home).
» The home menu appears.
4 Press to select [Browse USB].
5 Press OK
» The USB content browser appears.
Tip
Press BROWSE to switch between
Disconnect a USB storage device
Caution
Follow this procedure to avoid damage to your
USB storage device.
1 Press (Home) to exit the [USB] menu.
2
disconnecting the USB storage device.
View photos
1 In the USB content browser, select
[Picture] and press
to enter.
2 Press BROWSE to switch between
3 Press to select a photo.
4 Press OK to view the selected photo in
full screen mode.
Tip
When in full screen mode, press to move
between photos.
English
EN
Use Scenea to display a
picture as TV wallpaper
You can use Scenea to display a picture as
wallpaper on your TV. Make sure that the
location of your TV is set to home (see ‘Change
TV preferences’ on page 19).
Activate Scenea
Single-picture wallpaper
Press SCENEA on your remote control.
» The default or pre-loaded picture is
displayed.
Note
To deactivate the wallpaper, press any remote
control button except
, SMART SOUND,
or
SMART PIC.
The wallpaper is also deactivated when you
connect a USB storage device to the TV or
start an EasyLink-compliant device through
one-touch play.
Wallpaper slide show
Make sure the wallpaper is not yet activated.
1 Connect a USB storage device to the TV.
2 Press SCENEA.
» All pictures in the USB storage device
are displayed.
Note
If the sleep timer is off, the wallpaper is
displayed for 120 minutes. Otherwise, it is
displayed for the duration of the sleep timer.
Upload a wallpaper picture from a
USB device
Make sure your USB storage device contains a
picture of less than 1MB.
1 While the TV is on, connect the USB
storage device containing your pictures to
the USB connector at the side of your TV.
4 Press or to select a song.
5 Press OK or to play the song.
Press OK or
to pause, press OK
or
again to resume.
Press
to search-forward.
Press
to search-backward.
Press
to stop playback.
View a slideshow with music
You can view a picture slide show with
background music.
1 While the TV is on, connect the USB
storage device containing your pictures
and the music to the TV.
2 Press (Home).
3 Press to select [Browse USB] >
[Music].
4 Press to select an album of songs
and press OK.
5 Press BACK to return to the USB
content browser.
6 Press to select [Picture].
7 Press to select an album of
pictures and press OK.
Watch video from a USB device
1 In the USB content browser, press to
enter the [Video] folder.
2 Press to select a video.
3 Press OK or to play the video.
Press OK or
to pause, press OK
or
again to resume.
Press
to search-forward.
Press
to search-backward.
Press
to stop playback.
EN
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
Philips 32PFL5605S/98 User manual
- Category
- LCD TVs
- Type
- User manual
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Philips 40PFL7664H/12 Quick start guide
-
Philips 40PFL9904H/12 Quick start guide
-
Philips 22PFL3405/12 User manual
-
Philips 22PFL3404H/12 User manual
-
Philips MCD120/79 User manual
-
Philips 39PFL3008/56 User manual
-
-
Philips 32PFL3405H User manual
-
Philips 32PFL3205H User manual
-
Philips 32HFL4372D User manual
