Brigmton BSPORT-14-C Owner's manual

Type
Owner's manual
MANUAL DE INSTRUCCIONES
PULSERA DEPORTIVA - BLUETOOTH
PULSÓMETRO - NATACIÓN
BSPORT-14-B-N-A-M
INSTRUCTION MANUAL
SPORT BRACELET - BLUETOOTH
PULSOMETER - SWIMMING
BSPORT-14-B-N-A-M
ADJUSTING BELT
To adjust the belt, put the bracelet on his wrist, pass the strap through the
buckle and tighten until it locks. Insert the excess through the eye.
To put or remove the new up or down strap bracelet. With the move you
can make fixed or release it.
CONTROLS
FEATURES-SCREENS
Date/Time/Battery Level
Heart rate monitor: Once lit, hold the touch button for 2 seconds to
activate the heart rate monitor:
Pedometer: the steps are shown.
Distance: the distance in kilometers is shown.
Calories
On screen: Hold for 2 seconds to change the display mode and activate on
hand to turn on or off.
Status Display:
When the Bluetooth icon is displayed as indicated by the display device is
connected to your phone.
Swimming function:
The display shows the time, strokes and calories during exercise.
To enable/disable swim mode press and hold on the screen and select the
icon swimming activated and then hold to confirm activation/deactivation.
Off:
On the home screen:
Hold for two seconds, off screen appears. Hold two seconds to enter the
selection and press and hold again for two seconds to confirm.
Reset:
On the home screen, press and hold for two seconds, off screen appears.
Press again to access reset, hold two seconds to enter the selection and
then hold two seconds to confirm.
Back to the main menu:
On the home screen, press and hold for two seconds, off screen appears.
Double-click to access the function to return to the main menu and hold to
return to the main menu:
BLUETOOTH CONNECTION
Scan the QR code as needed your device:
ANDROID
IOS
Open the application, go to settings and match the bracelet with the device
through the application:
IOS
ANDROID
To disconnect your device bracelet go to the section in the option
Bluetooth application settings and select disconnect.
SYNCHRONIZATION
In the configuration section of the application, press SYNC. Note: Android
will automatically synchronize.
OTHER FEATURES
Automatic backlight: From 00:00 to 6:00 automatic lighting of the display
will remain off to avoid discomfort during the sleep period.
Setting the device: It is recommended to take the bracelet on his left hand.
Make sure the heart rate monitor sensor is in contact with the skin.
Sleep monitoring: The device automatically will monitor the quality of
sleep from 21:00 to 9:00 hours.
HEART RATE MONITOR IN REAL TIME
In the menu heart rate monitor (heart) hold until the device vibrates and
start heart rate measurement. It will measure for up to 15 seconds and
display the result on the screen:
A green light will stay on for the duration of the measurement.
ALL-DAY Function: You must select and activate this function from the
application. Every 10 minutes bracelet make a heart rate measurement. To
disable this feature you must do so from within the application.
NOTE: This function increases battery consumption.
APPLICATION
On the initial screen you can check data today, yesterday and a total
summary:
Screen measuring heart rate:
Configuration:
- Bluetooth to configure the connection and pair the device.
- SYNC: To synchronize information bracelet with the device. - NOTE: In
Android this function is performed automatically.
- Alarm: Set the alarm.
- Notifications: To configure the receipt of notifications.
IOS
ANDROID
- Time: Select 12 hours or 24 hours
- Selection of measure: Meters / Imperial
- Notification of messages and calls
IOS: Activate the incoming call. Message notifications arrive automatically:
ANDROID: Activate the incoming call. Enable the message notification:
- Social Notice:
- ALL-DAY Function: Activate the measurement function and take heart
rate measurement every 10 minutes.
- Screen saving mode
- Erasing data:
IOS:
ANDROID
- Upgrade / Version
- User information:
“Features can change without notice”
IMPORTED
FERSON ELECTRÓNICA, S.A.
CIF: A-41111881
SANTA CLARA DE CUBA 12
SEVILLA
ESPAÑA
DECLARATION OF CONFORMITY
Ferson Electrónica, S.A. declares under our responsibility that the equipment meets
the requirements indicated in the following directives:
ECM DIRECTIVES
EN60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013
EN62479:2010
EN301 489-1 V1.9.2 (2011-09)
EN301 489-17 V2.1.1 (2012-09)
EN300 328 V1.9.1 (2015-02)
Description of apparatus:
Model BRIGMTON BSPORT-14
Wireless device
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24

Brigmton BSPORT-14-C Owner's manual

Type
Owner's manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages