Bunn-O-Matic WDG-2 Datasheet

Type
Datasheet

This manual is also suitable for

Bunn-O-Matic WDG-2 is a weight-driven portion control grinder that precisely measures and grinds coffee beans to provide the exact amount needed for each cup, ensuring consistent quality and eliminating waste. It features two clear hoppers that can hold 6 lbs of beans each and two motors and separate grind chambers to prevent cross-contamination between different types of coffee. The WDG-2 interfaces with BUNN brewers for seamless integration and can be programmed to deliver the perfect amount of coffee every time.

Bunn-O-Matic WDG-2 is a weight-driven portion control grinder that precisely measures and grinds coffee beans to provide the exact amount needed for each cup, ensuring consistent quality and eliminating waste. It features two clear hoppers that can hold 6 lbs of beans each and two motors and separate grind chambers to prevent cross-contamination between different types of coffee. The WDG-2 interfaces with BUNN brewers for seamless integration and can be programmed to deliver the perfect amount of coffee every time.

Features
ITEM#
PROJECT
DATE
For available variations to some BUNN
products,
please contact your BUNN sales representative.
Corporate Offices
1400 Stevenson Drive
Springfield, Illinois 62703
Phone
800-637-8606
217-529-6601
Fax
217-529-6644
Technical Services
800-286-6070
Internet
http://www.bunnomatic.com
Western Regional Office
16431 Carmenita Road,
Cerritos, California 90701
Phone
562-926-0764
Fax
562-926-0858
Canadian Office
280 Industrial Parkway South
Aurora, Ontario, L4G 3T9
Phone
905-841-2866
Fax
905-841-2775
Patents
Apply
1/2000
Weight Driven Portion
Control Grinder
Model
WDG2
DG2
Weight Driven/Portion Control Grinder
Two clear hoppers merchandise
6 lbs. each of fresh coffee beans.
Automatically weighs the freshly
ground coffee to provide the
correct amount per selection.
Two motors/grind chambers
eliminate cross-contamination
between coffees.
Interfaces to BUNN brewers.
Portion controlled for just the
right amount of coffee every time.
Precision burrs for consistent,
commercial-quality grind.
Microprocessor controlled
accuracy.
Accurate to within .05 oz.
Grinder also available without
weight driven feature.
Related Products
BUNN® practices continuous product research and improvement. We reserve the right to change specifications and product design without notice.
Such revisions do not entitle the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment.
C1.5
Coffee Grinders/Portion Control/2 Motors 11/99
Precision Burrs
All BUNN grinders use commercial style,
precision cutting burrs to cut (not crush)
coffee beans and to deliver correct
grind distribution.
Weight Driven Grinder includes Digital Brewer Control
Model WDG2
(funnel not included)
Dimensions & Specifications
The Mark of Quality in Beverage Equipment Worldwide
All dimensions shown in inches.
Model Product # Volts Amps Capacity Cu. Ft. Shipping Weight
WDG2 25900.0000 120 4 6 lbs./side 5.1 75 lbs. (34.1 kg)
DG2 25700.0001 120 4 6 lbs./side 5.1 67 lbs. (30.4 kg)
Note: DG2 is the same grinder as WDG2 without internal scale to weigh coffee.
Electrical: Both grinders have attached cordset and require 2-wire grounded service rated 120V, 60 Hz.
  • Page 1 1
  • Page 2 2

Bunn-O-Matic WDG-2 Datasheet

Type
Datasheet
This manual is also suitable for

Bunn-O-Matic WDG-2 is a weight-driven portion control grinder that precisely measures and grinds coffee beans to provide the exact amount needed for each cup, ensuring consistent quality and eliminating waste. It features two clear hoppers that can hold 6 lbs of beans each and two motors and separate grind chambers to prevent cross-contamination between different types of coffee. The WDG-2 interfaces with BUNN brewers for seamless integration and can be programmed to deliver the perfect amount of coffee every time.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI