www.kodak.com/go/M5370support 15
ENGLISH
Installing software, transferring pictures
IMPORTANT:
To use the sharing and social networking features, you
must install the KODAK Share Button App.
1 Make sure the computer is connected to the Internet.
2 Turn off the camera.
3 Using the KODAK Camera USB
Cable, Micro B / 5-Pin, connect
the camera to the computer. (Use
only the cable included with this
camera.)
The camera turns on.
4 Follow the prompts on your
computer screen to download
and install the Share Button App
on your computer.
IMPORTANT:
If the installer does not run, choose and install the right
version for your computer:
www.kodak.com/go/camerasw
.
5 After the software is installed, follow the prompts to transfer
pictures and videos to your computer.
Pictures/videos that you tagged for sharing are emailed or uploaded to
social networking sites.
NOTE: You can also use a card reader to transfer pictures/videos to your computer.
See the Extended user guide www.kodak.com/go/M5370manuals
See How-To videos www.kodak.com/go/M5370demos
urg_01281.book Page 15 Thursday, May 12, 2011 9:56 AM