Lopi Large Flush Hybrid-Fyre® Wood Insert Rect. Operating instructions

Brand: Lopi

Model: Large Flush Hybrid-Fyre® Wood Insert Rect.

Type: Operating instructions

This manual is also suitable for

Lopi Large Flush Hybrid-Fyre® Wood Insert Rect. offers efficient heating solutions for larger spaces with its advanced design. Experience cleaner and more efficient wood-burning with an adjustable air wash system and a high-temperature catalytic combustor, reducing emissions. The large viewing area provides a captivating view of the flames. This model seamlessly blends modern aesthetics with eco-friendly performance, making it an ideal choice for conscious homeowners seeking a stylish and environmentally friendly heating solution.

Wood Insert Adjustable Offset Adapter

SKU 96200355

Page 1 of 2 17601841 — 3/26/14 © Travis Industries, Inc.

Compatibility

• Small Flush Wood Insert

• Flush Wood Plus Insert

• Large Flush Wood Insert

• Lopi Revere and 1750i

• Lopi Freedom

• Lopi Freedom Bay

Packing List

• Offset Adapter

• (8) Self-Drilling Screws

Dimensions

The offset adapter is

adjustable to allow

for a customized fit

into the fireplace.

Warning Regarding Draft

Use of an offset adapter may degrade draft performance of the insert. To minimize the

adverse effects, set the adapter to the minimum offset possible.

Installation

1. Calculate the required offset for the adapter (between 4” and 7”). This is done by

measuring the difference between the insert’s flue outlet within the fireplace cavity

and the chimney liner position inside the fireplace.

2. Using gloves, slide the two-part adapter to the correct offset (grasp the inside of the

flue collars to separate).

3. Use the 6 included self-drilling screws to secure the top of the adapter to the bottom

of the adapter (see photo below). 3 holes are provided on the top and bottom for

this purpose.

4" to 7"

1.5"

2.5"

6" Dia. Outlet

6" Dia. Inlet

Wood Insert Adjustable Offset Adapter

SKU 96200355

Page 2 of 2 17601841 — 3/26/14 © Travis Industries, Inc.

4. Follow the directions below to finalize the installation.

Small Flush Wood Insert:

Remove the flue adapter from the insert and attach the offset adapter to the flue

adapter (use the gasket tape included with the insert to seal the flue). We

recommend pre-drilling the holes for the screws (the stainless collar on the offset

adapter is difficult to drill). Attach the offset adapter to the chimney liner, making

sure the connection is sealed. Place the insert into position and secure the flue

adapter (see the manual for details).

All Other Inserts:

Place the flue adapter on top of the insert. Use the two included screws to secure

the adapter to the insert (see photo below). Remove the adapter (keep the screws)

and attach it to the chimney liner, making sure the connection is sealed. Slide the

insert into position and re-attach the offset adapter to the top of the insert.

Cleaning

This clean-out cover may be removed to access the inside of the offset adapter.

Use two of the included screws to

secure the adapter to the insert

(all appliances except Small

Flush

Wood

Insert)

Lopi Large Flush Hybrid-Fyre® Wood Insert Rect. Operating instructions

Brand: Lopi

Model: Large Flush Hybrid-Fyre® Wood Insert Rect.

Type: Operating instructions

This manual is also suitable for

Download PDF

report

Lopi Large Flush Hybrid-Fyre® Wood Insert Rect. Operating instructions

This manual is also suitable for

Lopi Large Flush Hybrid-Fyre® Wood Insert Rect. Operating instructions

Related papers

Other documents