Cadillac CTS/CTS-V Owner Manual (Include Mex) - 2012
1-10 In Brief
Memory Features
On vehicles with the memory
package, memory buttons 1 and 2
on the driver door are used to save
and recall memory settings for the
driver seat cushion and seatback,
outside mirrors, and the steering
column position, if the vehicle is
equipped with the power tilt and
telescopic steering column.
1: Saves and recalls for driver 1.
2: Saves and recalls for driver 2.
B : Moves the driver seat and/or
power steering column to the exit
position. See “Exit Recall” later in
this section.
Storing Memory Positions
To save into me m ory:
1. Adjust the driver seat, outside
mirrors, and the power steering
column, if equipped, to the
desired driving positions.
2. Press and hold “1” until
two beeps sound.
3. Repeat for a second driver
using “2.”
To reca l l mem o r y pos i t ions, pr ess
and release “1” or “2.” The vehicle
must be in P (Park) for an automatic
transmission, or the parking brake
must be applied for a manual
transmission. A single beep will
sound when the button is pressed.
The seat, outside mirrors, and/or
power steering column will move to
the position previously stored for the
identified driver.
If entry/exit recall is programmed on
in the vehicle personalization menu,
automatic entry recall occurs when
the ignition is turned on.
See Memory Seats on page 3�8
and Vehicle Personalization on
page 5�48.
Exit Recall
B : Press to move the driver seat
back a preset distance and/or the
power steering column, if equipped,
up and forward. A single beep
sounds when the exit feature
activates. The vehicle must be
in P (Park) for an automatic
transmission, or the parking brake
must be applied for a manual
transmission.
If entry/exit recall is programmed on
in the vehicle personalization menu,
automatic seat and/or steering
column movement occurs under
certain conditions. See Memory
Seats on page 3� 8.