Intermec 815-088-001 Datasheet

Type
Datasheet
1
Accessory Guide
CK3
b
CK3
x
CK3
r
Included with your computer
CK3B: mobile computer,
handstrap, stylus
CK3R: mobile computer,
handstrap, stylus,
standard battery
CK3X: mobile computer,
handstrap, stylus,
extended battery
Docks & Modules
Accessory Name Part Number Description
Single Dock 871-228-101
(AD20)
USB Host and Client Support with bay to charge
an auxiliary battery pack. Requires Power
Supply 851-061-502 and country specific AC
power cord. Optional: Single Dock Ethernet
Modules.
Spare battery well not compatible with CK7x battery
(318-046-011)
Multi-Dock, Ethernet
871-229-202
(AD21)
4-slot Ethernet dock provides extra port allowing
for ability to link up to three (3) multidocks.
Requires Power Supply 851-064-306 and
country-specific AC power cord.
Multi-Dock, Charge Only 871-229-101
(AD22)
Allows for charging up to 4 devices. Requires
power supply 851-064-306 and country-
specific power cord.
Vehicle Dock 871-231-102
(AV10)
Securely holds CK3 and provides power. Single
15-pin connector supports either RS232 (5V
pwr on pin 9) with cable (225-737-002) for
printer or scanner (including SR61BXR) or USB
Host with cable (VE011-2016). The CK3 Series
vehicle dock uses the same mounting system
(p/n 805-611-001) and vehicle power kits
Vehicle Holder 871-236-001 Securely holds CK3
Single Dock Ethernet Module 871-238-001 Ethernet Module interfaces with
USB Host connector on Single Dock.
IP30 Vehicle Holder 871-237-001 Non-Powered vehicle holder to hold CK3 with
IP30 attached.
RFID-Ready Snap-On Adapter
Accessory Name Part Number Description
IP30 IP30Axxxxxx Snaps onto the bottom of CK3 Series
devices as a passive UHF RFID handle.
2
Accessory Guide
CK3
b
CK3
x
CK3
r
Included with your computer
CK3B: mobile computer,
handstrap, stylus
CK3R: mobile computer,
handstrap, stylus,
standard battery
CK3X: mobile computer,
handstrap, stylus,
extended battery
Holsters & Handles
Accessory Name Part Number Description
Standard Belt Holster – without
scan handle
815-087-001 CK3X / CK3R rugged lightweight holster
with belt designed for use with handheld
applications without scan handle.
Not compatible with Rubber Protection Boot accessory
Standard Belt Holster – with scan handle 815-088-001 CK3X / CK3R rugged lightweight holster
with belt designed for use with handheld
applications WITH scan handle.
Not compatible with Rubber Protection Boot accessory
Standard Belt Holster 825-199-001 CK3 rugged lightweight holster with
belt designed for use with handheld
applications with scan handle.
Not compatible with CK3X / CK3R
Scan Handle 203-879-001 Customer installable scan handle
(replaces the hand strap)
Protective Boot 655-280-001 CK3B Customer installable rubber
boot – compatible with or without handle,
not compatible with snap-on adapters.
Not compatible with CK3X / CK3R
Protective Boot 203-988-001 CK3R customer installable rubber
boot – compatible with or without handle,
not compatible with snap-on adapter,
holster, vehicle or desktop dock.
Protective Boot 203-989-001 CK3X customer installable rubber boot
compatible with or without handle,
not compatible with snap-on adapter,
holster, vehicle or desktop dock.
3
Accessory Guide
CK3
b
CK3
x
CK3
r
Included with your computer
CK3B: mobile computer,
handstrap, stylus
CK3R: mobile computer,
handstrap, stylus,
standard battery
CK3X: mobile computer,
handstrap, stylus,
extended battery
Batteries & Chargers
Accessory Name Part Number Description
Standard Capacity Battery Pack 318-033-001
(AB17)
One (1) standard rechargeable 7.4
watt hours (2000 mAh) battery
CK3R ships with (1)
Not certified with CK3N, CK3G, CK3X-NI option
Extended Capacity Battery Pack 318-034-003
(AB18)
One (1) standard rechargeable 18.5 watt
hours (5100 mAh) battery pack
CK3X ships with (1)
Certified with CK3N
Extended Capacity ‘Smart’ Battery Pack 318-046-011
(1001AB01)
One (1) standard rechargeable 18.5
watt hours (5200 mAh) ‘smart’ battery
pack – provides battery health data
Not compatible with CK3B
Certified as option for CK3X-NI
Quad Battery Charger 871-230-101
(AC20)
Charges four CK3 Series battery packs.
Requires Power Supply 851-061-502
and country-specific AC power cord.
Not compatible with CK7x battery (318-046-011)
Snap-On Adapters
Accessory Name Part Number Description
RS-232 Snap-On Adapter 850-815-001
850-815-002
(AA21)
Snap-on adapter for enabling RS232
support from bottom of CK3. Must order
cables separately. Adapter provides DB9M
connector and 5V power on pin-9 for tethered
scanners.
850-815-001 – Use with CK3B / CK3R only
850-815-002 – Use with CK3X only
Audio Snap-On Adapter 850-823-001
(1007AA01)
CK3 Snap-on audio adapter. Provides
quick disconnect audio jack for use with
wired headset.
Not compatible with CK3X / CK3R
Power Snap-On Adapter 850-817-001
850-817-002
(AA23)
Snap-on power adapter recommended
for in-field charging solutions not
requiring vehicle dock. Supports use of
auto power charger p/n# 852-043-003
or AC power supply 851-065-305.
850-817-001 – Use with CK3B / CK3R only
850-817-002 – Use with CK3X only
Vocollect Snap-On Adapter 850-819-001
(AA23)
Snap-on Vocollect audio adapter
for wired head set support
Not compatible with CK3X / CK3R
4
Accessory Guide
CK3
b
CK3
x
CK3
r
Included with your computer
CK3B: mobile computer,
handstrap, stylus
CK3R: mobile computer,
handstrap, stylus,
standard battery
CK3X: mobile computer,
handstrap, stylus,
extended battery
Cables
Accessory Name Part Number Description
USB-A to USB-microB, 1M 236-209-001 Use with CK3 Series Single Dock (871-228-
101) or Vehicle Dock USB Adapter Cable for
ActiveSync (VE011-2016) connection to PC
USB port.
USB / Charging Cable 236-297-001 Use with CK3X / CK3R for Active Sync and/or
direct charging via USB without the need for
a dock or adapter (note charge times will be
longer).
Intended for stationary desktop use.
Power Supplies & Adapters
Accessory Name Part Number Description
Universal AC Charger Kit 203-990-001 Use with CK3X / CK3R, plugs directly into the
heel for charging. Ships with interchangeable
country plugs and 236-297-001 cable.
Universal Power Supply,
12VDC,Output
851-064-306
(AE14)
Use with CK3 Series Multi-docks
(871-229-202 & 871-229-101). Order country-
specific AC power cord separately.
Universal Power Supply,
12VDC/30W,Output
851-061-502
(AE18)
Use with CK3 Series Single Dock (871-228-101)
or CK3 Series Quad Battery Charger
(871-230-101). Order country specific
AC power cord separately.
Universal Power Supply, 5V 851-065-305
(AE23)
AC power supply with barrel jack. Allows
for charging CK3 Series devices without a
dock. Requires use of CK3 Series Power
Snap-on Adapter (850-817-001 / -002). Order
country-specific AC power cord separately.
5
Accessory Guide
CK3
b
CK3
x
CK3
r
Included with your computer
CK3B: mobile computer,
handstrap, stylus
CK3R: mobile computer,
handstrap, stylus,
standard battery
CK3X: mobile computer,
handstrap, stylus,
extended battery
Power Supplies & Adapters
Accessory Name Part Number Description
Auto Power Adapter 852-043-003
(AE33)
Auto Cigarette Lighter Adapter with
barrel jack that allows for charging
CK3 handheld. Requires use of CK3 Series
Power Snap-on Adapter ( 850-817-001 / -002)
Replacement Parts
Accessory Name Part Number Description
Stylus Replacement Kit 203-884-001 Contains five (5) sets of stylus
and coiled tether for CK3B
Not compatible with CK3X / CK3R
Stylus Replacement Kit 203-986-001 Contains five (5) sets of stylus and
coiled tether for CK3X / CK3R
Not compatible with CK3B
Handstrap Replacement Kit 203-883-001 Contains five (5) sets of Handstraps for
CK3B – includes mounting hardware
Not compatible with CK3X / CK3R
Hand strap Replacement Kit 203-987-001 Contains five (5) sets of hand straps for CK3X
/ CK3R includes mounting hardware
Not compatible with CK3B
Screen Cleaner Kit,
Pre-Moist Wipes
346-065-101 Includes 24 pre-moistened, non-
abrasive, non-streaking 4x7” wipes.
Screen Protector,
10 Each
346-069-107 Contains ten (10) self-adhesive screen protectors.
6
Accessory Guide
CK3
b
CK3
x
CK3
r
Included with your computer
CK3B: mobile computer,
handstrap, stylus
CK3R: mobile computer,
handstrap, stylus,
standard battery
CK3X: mobile computer,
handstrap, stylus,
extended battery
Copyright © 2013 Intermec
Technologies Corporation. All
rights reserved. Intermec is a
registered trademark of Intermec
Technologies Corporation. All
other trademarks are the property
of their respective owners.
612214-C 05/13
FlexDock Supplies
Accessory Name Part Number Description
Quad Dock-Ethernet DX4A1444410 Accommodates four mobile computers.
Includes power supply, North American
Power Cord. Features 100Base-T Ethernet
connectivity; provides 2 – RJ45 jacks for
upstream connections and downstream
“daisy-chain” connections of up to 10 docks.
Quad Dock-Ethernet DX4A1444400 Accommodates four mobile computers. Includes
power supply. Order power cord separately.
Features 100Base-T Ethernet connectivity;
provides 2 – RJ45 jacks for upstream connections
and downstream “daisy-chain” connections of up
to 10 docks.
Quad Dock-Charge Only DX4A2444410 Accommodates four mobile computers –
CHARGE ONLY. Includes power supply
and North American Power Cord.
Quad Dock-Charge Only DX4A2444400 Accommodates four mobile computers –
CHARGE ONLY. Includes power supply.
Order Power Cord separately.
4-Position Battery Charger DX2A2BB10 Includes two auxiliary pack charge cups, capable
of supporting four battery packs. Includes power
supply and North American Power Cord.
4-Position Battery Charger DX2A2BB00 Includes two auxiliary pack charge cups, capable
of supporting four battery packs. Includes
power supply. Order Power Cord separately.
8-Position Battery Charger DX4A2BBBB10 Includes four auxiliary pack charge cups, capable
of supporting eight battery packs. Includes
power supply and North American Power Cord.
8-Position Battery Charger DX4A2BBBB00 Includes four auxiliary pack charge cups, capable
of supporting eight battery packs. Includes
power supply. Order Power Cord separately.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

Intermec 815-088-001 Datasheet

Type
Datasheet

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI