KitchenAid KUBR204EPA Installation guide

Type
Installation guide

KitchenAid KUBR204EPA is a beverage center that provides a convenient and stylish way to store and cool your favorite drinks. With its compact design and spacious interior, it can easily fit into any kitchen layout and accommodate a variety of beverages. The adjustable temperature settings allow you to customize the cooling to your preference, ensuring your drinks are always at the perfect temperature. The reversible door swing and leveling legs offer flexible installation options, making it easy to integrate the beverage center into your existing kitchen design.

KitchenAid KUBR204EPA is a beverage center that provides a convenient and stylish way to store and cool your favorite drinks. With its compact design and spacious interior, it can easily fit into any kitchen layout and accommodate a variety of beverages. The adjustable temperature settings allow you to customize the cooling to your preference, ensuring your drinks are always at the perfect temperature. The reversible door swing and leveling legs offer flexible installation options, making it easy to integrate the beverage center into your existing kitchen design.

PRODUCT MODEL NUMBERS
OPENING DIMENSIONS
Beverage Center
Overlay Model
KUBL204EPA KUBR204EPA
Electrical: A 115 volt, 60 Hz., AC only,
15- or 20-amp fused, grounded electrical
supply is required. It is recommended that
a separate circuit serving only your
beverage center be provided. Use an
outlet that cannot be turned off by a
switch. Do not use an extension cord.
NOTE: Before performing any type of
installation, cleaning, or removing a light
bulb, unplug beverage center or
disconnect power.
¹⁄₂"
(1.3 cm)
A
14³⁄₄"
(37.5 cm)
24"
(60.96 cm)
min.
24" (60.96 cm) min.
34³⁄₈" (87.3 cm) min.
35" (88.9 cm) max.
B
Model Door Swing
KUBL204EPA Left
KUBR204EPA Right
A. 14³⁄" (37.5 cm) utility opening
B. 24" (60.96 cm) minimum opening width
To ensure proper ventilation for your beverage center, allow for a ¹\₄" (6.35 mm) space on each
side and at the top. When installing your beverage center next to a fixed wall, leave 2¹\₂" (6.35 cm)
minimum clearance on the hinge side to allow for the door to swing open.
NOTE: It is recommended that you do not install the beverage center near an oven, radiator, or
other heat source. Do not install in a location where the temperature will fall below 55°F (13°C).
For best performance, do not install the beverage center behind a cabinet door or block the base
grille.
¹⁄₄" (6.35 mm)
2¹⁄" (6.35 cm)
Height dimensions are shown with the leveling legs extended to the minimum height.
NOTE: When leveling legs are fully extended, add B\," (15 mm) to the height dimensions.
If the floor of the opening is not level with the kitchen floor, shim the opening to make it level with the
kitchen floor.
LOCATION REQUIREMENTS
Because Whirlpool Corporation policy includes a continuous commitment to improve
our products, we reserve the right to change materials and specifications without notice.
Dimensions are for planning purposes only. For complete details, see Installation
Instructions packed with product. Specifications subject to change without notice.
Ref. W10741573B
3/15
  • Page 1 1

KitchenAid KUBR204EPA Installation guide

Type
Installation guide

KitchenAid KUBR204EPA is a beverage center that provides a convenient and stylish way to store and cool your favorite drinks. With its compact design and spacious interior, it can easily fit into any kitchen layout and accommodate a variety of beverages. The adjustable temperature settings allow you to customize the cooling to your preference, ensuring your drinks are always at the perfect temperature. The reversible door swing and leveling legs offer flexible installation options, making it easy to integrate the beverage center into your existing kitchen design.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI