HomeSullivan 40OK-5111H Installation guide

Brand
HomeSullivan
Model
40OK-5111H
Type
Installation guide
40OK-5111H
ASSEMBLY INSTRUCTION
1.
INDOOR USE ONLY
2.
REPLACE THE BULB AFTER THE BULB GETS COOL.
Assembly steps:
Step 1.
Hang bead strings(L)
on (A4) and (A3).
And repeat with the rest bead strings(L) total
8pcs.
Step 2.
Hang bead strings(B)
on (A2).
Step 3.
Mount the shade (C) to the nipple(A4)
and secure with loop(D).
Step 4. Mount ceiling fitting
Step 4-1. Tighten loop(F)on the tube(G).
Step 4-2.Loosen screw(J)and pass canopy (H)
over the tube(G).
Step 4-3.Tighten loop(I) on the tube(G).
Step 4-4. Pass the main wire through the links
of chain,loop(F),canopy(H), tube(G)and
loop(I).
Step4-5.Attach first link and last link(E)
of chain to the loops(D) and(F).
Step 4-6. Connect wire to the power supply
cord.
Step 4-7. Raise the canopy(H)to ceiling and
secure it by tightening the screw(J).
Step 4-8. Hang the Loop(I)on the hook on
ceiling.
Step 5. Turn in the bulb to the socket.
After completed the above instruction, please
check once more to ensure its safety. Then you
may turn the power on. If the external cable
or cord is damaged it shall be replaced by
qualified person to avoid hazard.
D
E
F
G
H
I
J
A1
A2
B
A3
A4
C
A
L
  • Page 1 1

HomeSullivan 40OK-5111H Installation guide

Brand
HomeSullivan
Model
40OK-5111H
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents