2. Thermalright
  3. HR-09 Type 4

Thermalright HR-09 Type 4 User manual

  • Hello! I am an AI chatbot trained to assist you with the Thermalright HR-09 Type 4 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Installation
Component
Exploded View
The Ultimate Cooling Solutions !
www.thermalright.com
HR-09 Type4 Heatsink
HR-09 TYPE4
Heatsink
Important! Before proceeding with installation, please check for the most up-to-date
instructions at www.thermalright.com
Push Pin
61x12x1 Thermal Pad
Step 1: Thermal Pad Application
Apply 61x12x1mm thermal pad directly to
bottom of heatsink base
Step 3: Removal of Stock Heatsink
Before installation of HR-09, remove stock
PWN heatsink.
Step 4: Heatsink Installation
Place HR-09 Type 4 heatsink directly onto the
PWN chips. Insert push pins through mother-
board mounting holes and press down to secure
in place. Installation completed.
Mounting mechanism Type A
Mounting mechanism
Type B
1
2
3
Parts Name Piece(s)
1
HR-09 TYPE4 Heatsink
2
Push Pin
3
61x12x1 Thermal Pad
1
1
2
5
4
Mounting mechanism Type A
4
2
Mounting mechanism Type B
5
2
Mounting mechanism
Type B
Mounting mechanism
Type A
Step 2: Mounting Mechanism Selection
Select the appropriate mounting mechanism
that aligns with the mounting holes on your
motherboard. Insert at each end of heatsink
and then insert push-pins through holes on the
mounting mechanism.
/