1
www.digimerge.com
DNR200/DNR200 Series Mac CMS
Quick Start Guide
This guide will describe how to install the Mac CMS for the DNR200 and DNR200V Series NVRs and
how to connect to your system over a LAN or DDNS connection.
Installing the software
1. Download the software from www.digimerge.com.
2. Copy the software package file to your Desktop and double-click the file to install. An
icon
will appear on your Desktop.
NOTE: Y
ou must extract the package file on a Mac. You cannot extract the file on a PC.
Connecting to your NVR over the LAN
Once you have installed the software, you can add NVRs connected to your local area network (LAN).
Prerequisites:
• Your NVR must be connected to the
same network as the computer where you have installed the
CMS.
To connect to your NVR over the LAN:
1. Double-click the
icon to open the software.
2. Click Auto Add. Th
e software scans your local network for NVRs.
Click Auto Add
Last updated: June 14, 2013
2
Connecting to your NVR over the LAN
3. Check the NVR and click Add. Click OK.
Check the NVR
and click Add
Click Add
4. Click on the NVR in the list and click the button.
Click the NVR and then click
5. Click on the Password field and update the password to the NVR’s system password (default:
000000).
6. Click Getting Info.
The software will connect to the NVR to find the number of channels.
Ensure the correct password is entered
Click Getting Info
NOTE: If the software cannot find the number of channels, double-check the password, then click
Getting Info again.
3
www.digimerge.com
7. Click Save.
Click Save
8. Click Next.
9. Next, you must add cameras from your NVR to a group. Click one of the cameras, then press
+ A. Click to add cameras to the group.
Click one of the cameras and then press
+ A
Click to add cameras to the group
4
Connecting to your NVR over the LAN
10. Click Finish.
Click Finish
11. Click PREVIEW.
Click PREVIEW
5
www.digimerge.com
12. Click and drag the group to the display area to view your cameras.
Click and drag the group to the display
area to view your cameras
Result
Connecting to your NVR using a DDNS address
If you have NVRs with DDNS set up, you can connect to them over the Internet.
Prerequisite:
• Port forward the Client Port (default: 35000) an
d HTTP port (default: 80) on the router to the
NVR’s local IP address.
• Register the system for DDNS and input the DDNS information from the confirmation email into
the NVR.
6
Connecting to your NVR using a DDNS address
To connect to the NVR using a DDNS address:
1. Open the software and click DEVICE MGR.
Click DEVICE MGR
2. Click Manual Add.
Click Manual Add
7
www.digimerge.com
3. Configure the following:
• Title: Enter a name for your NVR.
• IP/Domain Name:
DNR200 Series: Enter the Domain Name/URL
Request you received in the confirmation email,
followed by .myddns-flir.com. For example, if your
Domain Name/URL Request is tomsmith, enter
tomsmith.myddns-flir.com.
OR
DNR200V Series: Enter the Domain Name/URL
Request you received in the confirmation email,
followed by .digimerge.net. For example, if your
Domain Name/URL Request is tomsmith, enter
tomsmith.digimerge.net
• Port: Enter the Client Port (default: 35000).
• User Name: Enter the NVR’s user name (default:
admin).
• Password: Enter the NVR’s password (default: 000000).
4. Click Ge
tting Info. The software will connect to the NVR to find the number of channels.
5. Click Add.
Click Getting Info
Click Add
8
Connecting to your NVR using a DDNS address
6. Click Next.
Click Next
7. Next, you must add cameras from your NVR to a group. Click one of the cameras, then press
+ A. Click to add cameras to the group.
Click one of the cameras and then press
+ A
Click to add cameras to the group
9
www.digimerge.com
8. Click Finish.
Click Finish
9. Click PREVIEW.
Click PREVIEW
10
Connecting to your NVR using a DDNS address
10. Click and drag the group to the display area to view your cameras.
Click and drag the group to the display
area to view your cameras
Result
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
Digimerge DN204P1V4 Series Quick start guide
- Type
- Quick start guide
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
FLIR DNE12TL2 Quick start guide
-
Digimerge DNR200 Series User manual
-
-
-
-
-
FLIR N133ED User guide
-
FLIR DN1142E43 User guide
-
-
FLIR DNB13TL2 User manual
Other documents
-
-
-
-
-
-
-
FLIR IP N16D44K84 User guide
-
FLIR DNR500R Series User manual
-
-