Titan Fitness SCRATCH AND DENT - 90" X-3 Series Bolt Down Power Rack - 36" Depth - Orange - FINAL SALE User manual

Titan Fitness
Brand
Titan Fitness
Model
SCRATCH AND DENT - 90" X-3 Series Bolt Down Power Rack - 36" Depth - Orange - FINAL SALE
Type
User manual

This manual is also suitable for

Titan Fitness SCRATCH AND DENT - 90" X-3 Series Bolt Down Power Rack - 36" Depth - Orange - FINAL SALE will provide the opportunity to engage in various workouts in the comfort of your house. The device will allow you to exercise with a barbell, perform pull-ups, and store weight plates. With 36 inches of depth, it provides ample space for different movements compared to shallower racks. The use of high-quality materials, such as sturdy steel construction, ensures stability and safety during your workouts.

Titan Fitness SCRATCH AND DENT - 90" X-3 Series Bolt Down Power Rack - 36" Depth - Orange - FINAL SALE will provide the opportunity to engage in various workouts in the comfort of your house. The device will allow you to exercise with a barbell, perform pull-ups, and store weight plates. With 36 inches of depth, it provides ample space for different movements compared to shallower racks. The use of high-quality materials, such as sturdy steel construction, ensures stability and safety during your workouts.

MPN(s): (2)X3BDUP80 - X3BDSB24, (2)X3BDUP80 - X3BDSB36,
(2)X3BDUP90 - X3BDSB24, (2)X3BDUP90 - X3BDSB36, (2)X3BDUP80 -
X3BDSB24 – FWHOLD, (2)X3BDUP80 - X3BDSB36 – FWHOLD,
(2)X3BDUP90 - X3BDSB24 – FWHOLD, (2)X3BDUP90 - X3BDSB36 -
FWHOLD
SKU(s): 401387, 401389, 401388, 401390, 401418, 401420, 401419,
401421
UPC(s): 840009216893, 840009216916, 840009216909, 840009216923,
840009217500, 840009217524, 840009217517, 840009217531
2
KEY BOX DESCRIPTION QTY KEY BOX DESCRIPTION QTY
(1) 1
24” Connecting Frame 4
(8) 1
Front Plastic Plate 68*48*5 2
(2) 1
Pull Up Bar 1
(9) 1
Short Plastic Plate 58*48*5 2
(3) 1
Rear Pull Up Bar 1
(10) 1
Flat Washer Φ17*Φ30*3 48
(4) 1
J-Hook(L) 1
(11) 1
Spring Washer Φ16 24
(5) 1
J-Hook(R) 1
(12) 1
Nut M16 24
(6) 1
Long Plastic Plate 148*68*5 4
(13) 1
Hex Bolt M16*110 24
(7) 1
Plastic Plate 68*58*5 2
(14) 1
Countersunk head screw M6*10 28
3
STEP 1
1. Connect the Connecting Frame (1) and Upright Frame (15), using Flat Washer Φ17*Φ30*3
(10), Spring Washer Φ16(11), Nut M16(12), and Hex Bolt M16*110(13).
4
STEP 2
Connect the Rear Pull Up Bar (3), Pull Up Bar (2) and Upright Frame (15), using Flat Washer
Φ17*Φ30*3 (10), Spring Washer Φ16(11), Nut M16(12), and Hex Bolt M16*110(13).
5
STEP 3
Install the left and right J-HOOK (4 & 5) on the Upright Frame (15).
Install the Weight Plate Holder (16) on the Upright Frame (15), using Flat Washer Φ17*Φ30*3 (10),
Spring Washer (11) Nut M16 (12), and Hex Bolt M16*110 (13).
6
KEY BOX DESCRIPTION QTY KEY BOX DESCRIPTION QTY
(1) 2
36” Connecng Frame 4
(8) 2
Front Plasc Plate 68*48*5 2
(2) 2
Pull Up Bar 1
(9) 2
Short Plasc Plate 58*48*5 2
(3) 2
Rear Pull Up Bar 1
(10) 2
Flat Washer Φ17*Φ30*3 48
(4) 2
J-Hook(L) 1
(11) 2
Spring Washer Φ16 24
(5) 2
J-Hook(R) 1
(12) 2
Nut M16 24
(6) 2
Long Plasc Plate 148*68*5 4
(13) 2
Hex Bolt M16*110 24
(7) 2
Plasc Plate 68*58*5 2
(14) 2
Countersunk head screw M6*10 28
7
STEP 1
1. Connect the Connecting Frame (1) and Upright Frame (15), using Flat Washer
Φ17*Φ30*3 (10), Spring Washer Φ16(11), Nut M16(12), and Hex Bolt M16*110(13).
8
STEP 2
Connect the Rear Pull Up Bar (3), Pull Up Bar (2) and Upright Frame (15), using Flat Washer
Φ17*Φ30*3 (10), Spring Washer Φ16(11), Nut M16(12), and Hex Bolt M16*110(13).
9
STEP 3
Install the left and right J-HOOK (4 & 5) on the Upright Frame (15).
Install the Weight Plate Holder (16) on the Upright Frame (15), using Flat Washer Φ17*Φ30*3 (10),
Spring Washer (11) Nut M16 (12), and Hex Bolt M16*110 (13).
10
KEY BOX DESCRIPTION QTY KEY BOX DESCRIPTION
QT
(1) 3 Weight Plate Holder 4 (5) 3 Spring Washer Φ16
8
(2) 3 Rubber Bumper 4 (6) 3 M16 Nut
8
(3) 3 End Cap Φ48*2 4 (7) 3 Hex Bolt M16*110 8
(4) 3 Flat Washer Φ17*Φ30*3 16 (8) 3 Hex Bolt M16*85 8
11
STEP 3
Install the left and right J-HOOK (4 & 5) on the Upright Frame (15).
Install the Weight Plate Holder (16) on the Upright Frame (15), using Flat Washer Φ17*Φ30*3 (10),
Spring Washer (11) Nut M16 (12), and Hex Bolt M16*110 (13).
12
This concludes the X3SERIES RACK Owner’s Manual.
If applicable to your product, make sure to tighten all
nut-and-bolt combinations before use.
Enjoy!
DISCLAIMER
This equipment must be used with care by capable and competent individuals under supervision, if necessary.
The use of any fitness equipment, including this one, involves the potential risk of injury. You accept and assume full
responsibility for any and all injuries, damages (both economic and non-economic), and losses of any type, which may
occur, and you fully and forever release and discharge Titan, its insurers, employees, officers, directors, associates, and
agents from any and all claims, demands, damages, rights of action, or causes of action, present or future, whether the
same be known or unknown, anticipated, or unanticipated, resulting from or arising out of the use of said equipment.
TITAN MAKES NO WARRANTY WHATSOEVER WITH RESPECT TO THE EQUIPMENT, INCLUDING ANY WARRANTY OF
MERCHANTABILITY OR WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, WHETHER EXPRESS OR IMPLIED BY LAW,
COURSE OF DEALING, COURSE OF PERFORMANCE, USAGE OF TRADE OR OTHERWISE. BUYER ASSUMES ALL LIABILITY IN
USE OF THE EQUIPMENT.
NEED HELP?
CONTACT US FIRST.
1 (800) 605-8241
info@titandistributorsinc.com /
Business Hours: Monday–Friday • 8:00 a.m.–5:00 p.m. (CT)
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

Titan Fitness SCRATCH AND DENT - 90" X-3 Series Bolt Down Power Rack - 36" Depth - Orange - FINAL SALE User manual

Titan Fitness
Brand
Titan Fitness
Model
SCRATCH AND DENT - 90" X-3 Series Bolt Down Power Rack - 36" Depth - Orange - FINAL SALE
Type
User manual
This manual is also suitable for

Titan Fitness SCRATCH AND DENT - 90" X-3 Series Bolt Down Power Rack - 36" Depth - Orange - FINAL SALE will provide the opportunity to engage in various workouts in the comfort of your house. The device will allow you to exercise with a barbell, perform pull-ups, and store weight plates. With 36 inches of depth, it provides ample space for different movements compared to shallower racks. The use of high-quality materials, such as sturdy steel construction, ensures stability and safety during your workouts.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents