Etac Cross 6 Assembly Instruction

Type
Assembly Instruction
74005D
10-05-04
Etac AB, Box 203, SE-334 24 Anderstorp
Tel. +46/371-58 73 00, Fax. +46/371-58 73 90
www.etac.se
Hälband
Heel-loop
Fersenband
24458
Monteringsanvisning / Assembly instruction / Montageanweisung
Hälband
Monteras på uppfällbar fotplatta. Hålanvisning för skruvens montering finns på undersidan av fotplattan: Främre alt bakre
”hörnet” kan användas. Gör hålet genom att borra (6 mm).
Heel-loop
Mounted on a foldable footrest. Instructions for placement of the screw are found on the bottom of the footrest: the front or
back corner can be used. Make the hole by drilling (6 mm).
Fernsenband
Das Fersenband wird auf eine hochklappbare Fußplatte montiert. Ein vorgestanztes Loch für die Montage der Schraube befin-
det sich auf der Unterseite der Fußplatte: Die vordere bzw. hintere ”Ecke” kann verwendet werden. Bohren Sie ein Loch in die
Fußplatte (6 mm).
  • Page 1 1

Etac Cross 6 Assembly Instruction

Type
Assembly Instruction

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages