Pittsburgh 56735 Owner's manual

Brand: Pittsburgh

Model: 56735

Type: Owner's manual

This manual is also suitable for

Item 56735

Pittsburgh 56735 is a 20-ton capacity bottle jack designed for lifting heavy loads, with a maximum height of 16-1/2", a minimum height of 8-5/8", and a base dimension of 5-3/4" x 5-1/2". It features a saddle that can be adjusted in height using an elevating screw, allowing for precise positioning under the load. The jack's sturdy construction and robust design make it suitable for automotive, industrial, and construction applications, providing a reliable and efficient means of lifting and supporting heavy equipment, vehicles, and other objects.

Visit our website at: http://www.harborfreight.com

Email our technical support at: [email protected]

56684 shown

56684 - 4 Ton

56734 - 8 Ton

56738 - 12 Ton

Low Profile

56739 - 12 Ton

56735 - 20 Ton

Low Profile

56736 - 20 Ton

56737 - 30 Ton

Owner’s Manual & Safety Instructions

Save This Manual Keep this manual for the safety warnings and precautions, assembly,

operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the

back of the manual near the assembly diagram (or month and year of purchase if product has no number).

Keep this manual and the receipt in a safe and dry place for future reference. 20k

When unpacking, make sure that the product is intact

and undamaged. If any parts are missing or broken,

please call 1-888-866-5797 as soon as possible.

2020 by Harbor Freight Tools

No portion of this manual or any artwork contained herein may be reproduced in

any shape or form without the express written consent of Harbor Freight Tools.

Diagrams within this manual may not be drawn proportionally. Due to continuing

improvements, actual product may differ slightly from the product described herein.

To ols required for assembly and se rv ic e m ay n ot b e i nc lu de d .

Read this material before using this product.

Failure to do so can result in serious injury.

SAVE THIS MANUAL.

Page 2 For technical questions, please call 1-888-866-5797. Bottle Jacks

Specifications

ITEM Weight Capacity

Max.

Height

Min.

Height

Base

Dimensions

56684 4 Tons (8,000 lb.) 14-1/4" 7-1/2" 4-3/8" x 3-3/4"

56734 8 Tons (16,000 lb.) 17-5/8" 9" 5" x 4-3/8"

56738 12 Tons (24,000 lb.) 15" 7-5/8" 5" x 5"

56739 12 Tons (24,000 lb.) 18" 9" 5-1/2" x 4-1/2"

56735 20 Tons (40,000 lb.) 16-1/2" 8-5/8" 5-3/4" x 5-1/2"

56736 20 Tons (40,000 lb.) 17-1/2" 9-3/8" 6" x 5-1/8"

56737 30 Tons (60,000 lb.) 16-1/2" 10-1/4" 7-3/8" x 6-5/8"

WARNING SYMBOLS AND DEFINITIONS

This is the safety alert symbol. It is used to alert you to

potential personal injury hazards. Obey all safety messages

that follow this symbol to avoid possible injury or death.

Indicates a hazardous situation which, if not avoided,

will result in death or serious injury.

Indicates a hazardous situation which, if not avoided,

could result in death or serious injury.

Indicates a hazardous situation which, if not avoided,

could result in minor or moderate injury.

Addresses practices not related to personal injury.

IMPORTANT SAFETY INFORMATION

Read all safety warnings and instructions.

Failure to follow the warnings and instructions may result in serious injury.

Save all warnings and instructions for future reference.

1. Study, understand, and follow all

instructions before operating this device.

2. Do not exceed rated capacity.

3. Use only on hard, level surfaces.

4. Lifting device only.

Immediately after lifting, support the

vehicle with appropriate means.

5. Do not adjust safety valve.

6. Wear ANSI-approved safety goggles and

heavy-duty work gloves during use.

7. Keep clear of load while

lifting and lowering.

8. Lower load slowly.

Page 3For technical questions, please call 1-888-866-5797.Bottle Jacks

9. Do not use for aircraft purposes.

10. Apply parking brake and chock

tires before lifting vehicle.

11. Lift vehicle only at manufacturer-

recommended locations.

12. Inspect before every use; do not

use if parts loose or damaged.

13. Keep your work area clean and well lit.

Cluttered work areas invite accidents.

14. Keep bystanders, children, and visitors

away while operating jack. Distractions

can cause you to lose control.

Protect others in the work area.

15. Stay alert. Watch what you are doing, and

use common sense when operating a jack.

Do not use a jack while tired or under the

influence of drugs, alcohol, or medication.

A moment of inattention while operating

jacks may result in serious personal injury.

16. Store idle jacks out of reach of children

and other untrained persons. Jacks are

dangerous in the hands of untrained users.

17. Jack service must be performed only by

qualified repair personnel. Service or

maintenance performed by unqualified

personnel could result in a risk of injury.

18. When servicing a jack, use only identical

replacement parts - refer to attached,

product-specific parts list and diagram.

Follow instructions in the “Inspection,

Maintenance, And Cleaning” section

of this manual. Use of unauthorized

parts or failure to follow maintenance

instructions may create a risk of injury.

19. Maintain labels and nameplates on the

Jack. These carry important information.

If unreadable or missing, contact

Harbor Freight Tools for a replacement.

20. Before use, read manufacturer’s

instruction manual for the vehicle

(or object) you will lift.

21. When lifting only one wheel, support the

load immediately with one jack stand (not

included) placed under the side of the

vehicle being lifted. Align the saddle of

the jack stand directly under the vehicle’s

seam or recommended lifting point.

22. When lifting the entire front end or

rear end of a vehicle, support the load

immediately with two jack stands.

Align the saddles of the jack stands

directly under the vehicle’s frame or

recommended lifting points. Also, adjust

the jack stands to the same height.

23. Do not work under the vehicle

without properly supporting the

vehicle with jack stands.

24. Avoid dangerous oncoming

traffic. Use the Jack as far away

from the roadside as possible.

25. Industrial applications must

follow OSHA requirements.

26. Do not allow anyone in the vehicle while

using the Jack. Keep all bystanders a

safe distance away from the vehicle.

27. Do not support both ends of the

vehicle at the same time.

28. Before lowering the Jack, remove all tools

and equipment from under the vehicle.

29. The warnings, precautions, and

instructions discussed in this manual

cannot cover all possible conditions

and situations that may occur. The

operator must understand that common

sense and caution are factors, which

cannot be built into this product, but

must be supplied by the operator.

SAVE THESE INSTRUCTIONS.

Page 4 For technical questions, please call 1-888-866-5797. Bottle Jacks

Operating Instructions

Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning

of this document including all text under subheadings therein before set up or

use of this product.

Bleeding

IMPORTANT! Before first use, check

for proper hydraulic oil level in the

Jack. Then thoroughly test the Jack for

proper operation prior to its actual use.

If the Jack appears not to be working

properly, it may be necessary to bleed

its hydraulic system of excess air.

1. Place the lower portion of the Handle

over the Release Valve and open it

by turning it counterclockwise.

Saddle

Fulcrum

Handle over

Release Valve

2. Insert the Handle into the Fulcrum

and pump about five times. Apply

pressure to the Saddle and pump

Handle quickly several more times

to remove trapped air in the Ram.

3. Carefully use a flat dull-sided edge to

push down the top inside rim of the Oil

Fill Plug to equalize pressure inside the

Pump, then release the Oil Fill Plug.

Note: Do not use a sharp edge

as it may damage the plug.

Oil Fill Plug

covering Oil

Fill Hole

Flat Edge

4. Remove the Oil Fill Plug and look into

the Oil Fill Hole. If necessary, top off

the Oil Fill Hole with hydraulic oil.

5. Replace the Oil Fill Plug.

6. Turn the Handle clockwise to

close the Release Valve.

7. Test the Jack several times for proper

operation before attempting to lift a load.

If, after purging, the Jack still does not

appear to be working properly, do not

use the Jack until it has been repaired

by a qualified service technician.

Page 5For technical questions, please call 1-888-866-5797.Bottle Jacks

Lifting

WARNING! TO PREVENT SERIOUS

INJURY: Set Jack on a flat, level, solid,

ground surface. If using with vehicle,

set safely away from oncoming traffic

and turn off vehicle’s engine. Also place

the vehicle’s transmission in “PARK” (if

automatic) or in its lowest gear (if manual).

Set the vehicle’s emergency brake. Then,

block the wheels that are not being lifted.

1. Place the lower portion of the Handle

over the Release Valve and turn the

Handle counterclockwise to lower the

Jack. Once the Jack is fully lowered,

turn the Handle firmly clockwise

to close the Release Valve.

2. Carefully position the Saddle of the

Jack under the vehicle manufacturer’s

recommended lifting point. If equipped,

the Elevating Screw can be used to

alter the height of the Jack’s Saddle;

it is adjusted by turning it clockwise

or counterclockwise. (See vehicle

manufacturer’s owner’s manual for

location of seam lifting point when

lifting only one wheel and frame

lifting points when lifting the entire

front or rear end of the vehicle.)

Elevating Screw

(some models)

Ram

3. Place the Handle in the Fulcrum and pump

until the top of the Jack’s Saddle has

nearly reached the vehicle lifting point.

Handle

Fulcrum

Saddle

Release Valve

Note: The Jack should be positioned at 90°

to the vehicle’s lifting point to ensure the

Jack’s Saddle and vehicle lifting point are

in alignment. If not, remove and reposition

the Jack before lifting the vehicle.

4. To lift the vehicle, pump the

Handle of the Jack. Use smooth,

full strokes for best results.

5. Once the vehicle is raised, slide a

jack stand of appropriate capacity (not

included) to the proper lifting point referred

to in the vehicle owner’s manual. If using

two jack stands, position them at the

same point on each side of the vehicle.

6. Center the vehicle’s lifting point(s) on

the saddle of the jack stand(s). Set

up the jack stand(s) according to the

manufacturer’s instructions, making sure

that they lock securely into position.

Note: If using two jack stands they

must be at the same height.

7. Place the Handle over the Release

Valve and slowly turn the Handle

counterclockwise to open the Release

Valve and lower the vehicle onto the

saddle(s) of the jack stand(s). Then,

turn the Handle firmly clockwise

to close the Release Valve.

Page 6 For technical questions, please call 1-888-866-5797. Bottle Jacks

Lowering

Handle over

Release Valve

Saddle

Fulcrum

1. Remove all tools, parts, etc.

from under the vehicle.

2. Position the Saddle under the lifting

point. Place Handle over Release

Valve and turn the Handle firmly

clockwise to close the Release Valve.

3. Move the Handle to the Fulcrum and

pump to raise the vehicle slightly above

the saddle(s) of the jack stand(s). Then,

collapse and remove jack stand(s).

4. Move the Handle back to the Release

Valve and slowly turn the Handle

counterclockwise (never more than two full

turns) to lower the vehicle onto the ground.

5. Lower the Jack completely. Then,

store in a safe, dry location out

of reach of children’s reach.

Page 7For technical questions, please call 1-888-866-5797.Bottle Jacks

Maintenance and Servicing Instructions

Procedures not specifically explained in this manual

must be performed only by a qualified technician.

TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION:

Do not use damaged equipment. If abnormal noise or vibration

occurs, have the problem corrected before further use.

Cleaning, Maintenance, and Lubrication

1. Before each use, inspect the general

condition of the Jack. Check for

broken, cracked, or bent parts, loose or

missing parts, and any condition that

may affect the proper operation of the

product. If a problem occurs, have the

problem corrected before further use.

Do not use damaged equipment.

2. Before each use, thoroughly test the

Jack for proper operation prior to

its actual use. If the Jack appears

not to be working properly, follow

Bleeding instructions on page 4.

3. Before each use, check oil level:

a. Open Release Valve by turning it

counterclockwise. Lower the Jack

to its lowest position. Press down

on the Saddle if necessary.

b. With the Jack upright in a level,

vertical position and the Handle

pointing down in the Fulcrum, carefully

remove the Oil Fill Plug. The oil level

should be level with the bottom of

Oil Fill hole. Top off if necessary but

do not overfill. Always fill with clean

hydraulic jack oil (not included).

c. Reinstall Oil Fill Plug and close

Release Valve by turning it

clockwise. Check Jack operation.

Bleed air from system as needed,

see instructions on page 4.

4. Change the hydraulic oil at least

once every three years:

a. With the Jack fully lowered, remove the

Oil Fill Plug on the side of the Housing.

b. Tip the Jack to allow the old

hydraulic oil to drain out of the

Housing completely, and dispose of

the old hydraulic oil in accordance

with local regulations.

c. With the Jack upright, completely

fill the Housing with a high

quality hydraulic oil (not included)

until the oil just begins to run

out of the Oil Fill hole.

d. Then, reinstall the Oil Fill Plug

and check jack operation. Bleed

air from system as needed, see

instructions on page 4.

5. Clean with a clean cloth with a detergent

or mild solvent. Then, store the Jack in a

safe, dry location out of reach of children

and other non-authorized people.

Page 8 For technical questions, please call 1-888-866-5797. Bottle Jacks

Troubleshooting

TO PREVENT SERIOUS INJURY: Use caution when

troubleshooting a malfunctioning jack. Stay well clear of the

supported load. Completely resolve all problems before use.

If the solutions presented in the Troubleshooting guide do not solve the problem, have a qualified

technician inspect and repair the jack before use. After the jack is repaired: Test it carefully

without a load by raising it and lowering it fully, checking for proper operation, BEFORE

RETURNING THE JACK TO OPERATION.

DO NOT USE A DAMAGED OR MALFUNCTIONING JACK!

POSSIBLE SYMPTOMS

PROBABLE SOLUTION

(Make certain that the jack is

not supporting a load while

attempting a solution.)

Jack will

not lift at

its weight

capacity

Saddle

lowers

under load

Pump

stroke

feels

spongy

Saddle

will not

lift all

the way

Handle

moves up

when jack

is under

load

Oil

leaking

from fill

plug

X X

Check that Release Valve

is closed fully.

X X X

Valves may be blocked and may not

close fully. To flush the valves:

1. Lower the Saddle and securely

close the Release Valve.

2. Manually lift the Saddle

several inches.

3. Open the Release Valve

and force the Saddle down

as quickly as possible.

X X

Jack may be low on oil. Check

the oil level and refill if needed.

Jack may require bleeding - see

instructions on page 4.

Unit may have too much

hydraulic oil inside, check fluid

level and adjust if needed.

PLEASE READ THE FOLLOWING CAREFULLY

THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY

DIAGRAM IN THIS DOCUMENT AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER

OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE

BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR

THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE

MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS

REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS,

AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF

HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO,

OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.

Page 9For technical questions, please call 1-888-866-5797.Bottle Jacks

Parts Lists and Diagrams

Parts List and Diagram (56684, 56734, 56736 and 56739)

Part Description Qty

1 Round Wire Snap Ring 1

2 Rectangular Ring 2

3 O-Ring 1

4 Ram 1

5 Bowl Washer 1

6 O-Ring 1

7 Retainer Ring 1

8 Housing 1

9 Oil Fill Plug 1

10 Bearing Ø6mm 1

11 Release Valve 1

12 Plug 1

Part Description Qty

13 Safety Valve 1

14 Spring 1

15 Spring Holder 1

16 Ball Bearing Ø3mm 1

17 Ball Bearing Ø5mm 2

18 Bowl Washer 1

19 Pump Plunger 1

20 Cotter Pin 2

21 Pin 2

22 Fulcrum 1

23 Handle 1

24 Seal Kit 1

Page 10 For technical questions, please call 1-888-866-5797. Bottle Jacks

Parts List and Diagram (56735 and 56738)

Part Description Qty

1 Round Wire Snap Ring 1

2 Guide Bush 1

3 O-Ring 2

4 Elevating Screw 1

5 Nut 1

6 Ram 1

7 Piston 1

8 Cap Seal 1

9 O-Ring 1

10 Release Valve 1

11 O-Ring 1

12 Steel Ball 1

13 Base 1

14 Oil Fill Plug 1

15 Housing 1

16 Cylinder 1

17 Retainer Ring 1

Part Description Qty

18 Steel Ball 2

19 Pump Plunger 1

20 Retainer Ring 1

21 O-Ring 1

22 Stop Block 1

23 Pump Cylinder 1

24 Filter 1

25 Pin 2

26 Cotter Pin 2

27 Link Base 1

28 Rivet 1

29 Link 1

30 Pin 1

31 Rivet 1

32 Rivet 1

33 Fulcrum 1

34 Handle (not shown) 1

Page 11For technical questions, please call 1-888-866-5797.Bottle Jacks

Parts List and Diagram (56737)

Part Description Qty

1 Round Wire Snap Ring 1

2 Rectangular Ring 2

3 O-Ring 1

4 Ram 1

5 Bowl Washer 1

6 O-RIng 1

7 Round Wire Snap Ring 1

8 Housing 1

9 Steel Bass Ø6mm 3

10 Release Valve 1

11 Plug 1

12 Adjusting Screw 1

Part Description Qty

13 Spring 1

14 Spring Holder 1

15 Steel Ball Ø3mm 1

16 Retainer Washer 1

17 Pump Plunger Assembly 1

18 Oil Fill Plug 1

19 Cutter Pin 3

20 Pin 3

21 Fulcrum 1

22 Handle Assembly 1

23 Seal Kit 1

Limited 90 Day Warranty

Harbor Freight Tools Co. makes every effort to assure that its products meet high quality

and durability standards, and warrants to the original purchaser that this product is free from

defects in materials and workmanship for the period of 90 days from the date of purchase.

This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence

or accidents, repairs or alterations outside our facilities, criminal activity, improper installation,

normal wear and tear, or to lack of maintenance. We shall in no event be liable for death,

injuries to persons or property, or for incidental, contingent, special or consequential damages

arising from the use of our product. Some states do not allow the exclusion or limitation of

incidental or consequential damages, so the above limitation of exclusion may not apply to you.

THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR

IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.

To take advantage of this warranty, the product or part must be returned to us with transportation

charges prepaid. Proof of purchase date and an explanation of the complaint must accompany

the merchandise. If our inspection verifies the defect, we will either repair or replace

the product at our election or we may elect to refund the purchase price if we cannot readily

and quickly provide you with a replacement. We will return repaired products at our expense,

but if we determine there is no defect, or that the defect resulted from causes not within

the scope of our warranty, then you must bear the cost of returning the product.

This warranty gives you specific legal rights and you may also

have other rights which vary from state to state.

26541 Agoura Road • Calabasas, CA 91302 • 1-888-866-5797

Record Serial Number Here:

Note: If product has no serial number, record month and year of purchase instead.

Note: Some parts are listed and shown for illustration purposes only, and are not available

individually as replacement parts. Parts may not be interchangeable. When ordering

replacement parts, specify UPC number of the item you are ordering the part for:

4-Ton (56684): 193175369697

8-Ton (56734): 792363567343

12-Ton (56739): 792363567398

12-Ton Low Profile (56738): 792363567381

20-Ton (56736): 193175370556

20-Ton Low Profile (56735): 792363567350

30-Ton (56737): 792363567374

Pittsburgh 56735 Owner's manual

Brand: Pittsburgh

Model: 56735

Type: Owner's manual

This manual is also suitable for

Item 56735

Download PDF

report

Pittsburgh 56735 Owner's manual

This manual is also suitable for

Pittsburgh 56735 Owner's manual

Related papers

Other documents