The recording capability of the Studio 8 is
not limited to 8 tracks. "Ping-
Ponging"/"Collapsing"/"Bouncing" allows you
to combine up to 7 tracks onto the remaining
blank track. You may even record additional
new material while bouncing tracks. (For
example, material recorded on tracks 1
through 4 can be collapsed to track 8.)
Many times, a way to improve your program
will become apparent as it is being recorded.
"Punch-in" gives you a way to add those last
minute ideas to your recording without redoing
the entire project. Punch-in can also be used to
correct any mistakes that made their way onto
the tape.
