Aaeon PICO-APL4 User manual

Last Updated: October 22, 2020

PICO-APL4

PICO-ITX Board

User’s Manual 6

th

Ed

Preface II

Pico-ITX Board PICO- APL4

Copyright Notice

This document is copyrighted, 2020. All rights are reserved. The original manufacturer

reserves the right to make improvements to the products described in this manual at

any time without notice.

No part of this manual may be reproduced, copied, translated, or transmitted in any

form or by any means without the prior written permission of the original

manufacturer. Information provided in this manual is intended to be accurate and

reliable. However, the original manufacturer assumes no responsibility for its use, or for

any infringements upon the rights of third parties that may result from its use.

The material in this document is for product information only and is subject to change

without notice. While reasonable efforts have been made in the preparation of this

document to assure its accuracy, AAEON assumes no liabilities resulting from errors or

omissions in this document, or from the use of the information contained herein.

AAEON reserves the right to make changes in the product design without notice to its

users.

Preface III

Pico-ITX Board PICO- APL4

Acknowledgement

All other product name or trademarks are properties of their respective owners.

⚫ Microsoft Windows® is a registered trademark of Microsoft Corp.

⚫ Intel®, Pentium® and Celeron® are registered trademarks of Intel Corp.

⚫ Intel Atom™ is a trademark of Intel Corp.

⚫ ITE is a trademark of Integrated Technology Express, Inc.

⚫ IBM, PC/AT, PS/2, and VGA are trademarks of International Business Machines

Corporation.

All other product names or trademarks are properties of their respective owners.

Preface IV

Pico-ITX Board PICO- APL4

Packing List

Before setting up your product, please make sure the following items have been

shipped:

Item

Quantity

PICO-APL4

1

If any of these items are missing or damaged, please contact your distributor or sales

representative immediately.

Preface V

Pico-ITX Board PICO- APL4

About this Document

This User’s Manual contains all the essential information, such as detailed descriptions

and explanations on the product’s hardware and software features (if any), its

specifications, dimensions, jumper/connector settings/definitions, and driver installation

instructions (if any), to facilitate users in setting up their product.

Users may refer to the product page at AAEON.com for the latest version of this

document.

Preface VI

Pico-ITX Board PICO- APL4

Safety Precautions

Please read the following safety instructions carefully. It is advised that you keep this

manual for future references

1. All cautions and warnings on the device should be noted.

2. Make sure the power source matches the power rating of the device.

3. Position the power cord so that people cannot step on it. Do not place anything

over the power cord.

4. Always completely disconnect the power before working on the system’s

hardware.

5. No connections should be made when the system is powered as a sudden rush

of power may damage sensitive electronic components.

6. If the device is not to be used for a long time, disconnect it from the power

supply to avoid damage by transient over-voltage.

7. Always disconnect this device from any AC supply before cleaning.

8. While cleaning, use a damp cloth instead of liquid or spray detergents.

9. Make sure the device is installed near a power outlet and is easily accessible.

10. Keep this device away from humidity.

11. Place the device on a solid surface during installation to prevent falls

12. Do not cover the openings on the device to ensure optimal heat dissipation.

13. Watch out for high temperatures when the system is running.

14. Do not touch the heat sink or heat spreader when the system is running

15. Never pour any liquid into the openings. This could cause fire or electric shock.

16. As most electronic components are sensitive to static electrical charge, be sure to

ground yourself to prevent static charge when installing the internal components.

Use a grounding wrist strap and contain all electronic components in any

static-shielded containers.

Preface VII

Pico-ITX Board PICO- APL4

17. If any of the following situations arises, please the contact our service personnel:

i. Damaged power cord or plug

ii. Liquid intrusion to the device

iii. Exposure to moisture

iv. Device is not working as expected or in a manner as described in

this manual

v. The device is dropped or damaged

vi. Any obvious signs of damage displayed on the device

18. DO NOT LEAVE THIS DEVICE IN AN UNCONTROLLED ENVIRONMENT WHERE

THE STORAGE TEMPERATURE IS BELOW -20° C (-4°F) OR ABOVE 60°C (140°F)

TO PREVENT DAMAGE.

Preface VIII

Pico-ITX Board PICO- APL4

FCC Statement

This device complies with Part 15 FCC Rules. Operation is

subject to the following two conditions: (1) this device may not

cause harmful interference, and (2) this device must accept any

interference received including interference that may cause

undesired operation.

Caution:

There is a danger of explosion if the battery is incorrectly replaced. Replace only with the

same or equivalent type recommended by the manufacturer. Dispose of used batteries

according to the manufacturer’s instructions and your local government’s recycling or

disposal directives.

Attention:

Il y a un risque d’explosion si la batterie est remplacée de façon incorrecte.

Ne la remplacer qu’avec le même modèle ou équivalent recommandé par le constructeur.

Recycler les batteries usées en accord avec les instructions du fabricant et les directives

gouvernementales de recyclage.

Preface IX

Pico-ITX Board PICO- APL4

China RoHS Requirements (CN)

产品中有毒有害物质或元素名称及含量

AAEON Main Board/ Daughter Board/ Backplane

部件名称

有毒有害物质或元素

铅

(Pb)

汞

(Hg)

镉

(Cd)

六价铬

(Cr(VI))

多溴联苯

(PBB)

多溴二苯醚

(PBDE)

印刷电路板

及其电子组件

○

外部信号

连接器及线材

○

O：表示该有毒有害物质在该部件所有均质材料中的含量均在

SJ/T 11363-2006 标准规定的限量要求以下。

X：表示该有毒有害物质至少在该部件的某一均质材料中的含量超出

SJ/T 11363-2006 标准规定的限量要求。

备注：此产品所标示之环保使用期限，系指在一般正常使用状况下。

Preface X

Pico-ITX Board PICO- APL4

China RoHS Requirement (EN)

Poisonous or Hazardous Substances or Elements in Products

AAEON Main Board/ Daughter Board/ Backplane

Component

Poisonous or Hazardous Substances or Elements

Lead

(Pb)

Mercury

(Hg)

Cadmium

(Cd)

Hexavalent

Chromium

(Cr(VI))

Polybrominated

Biphenyls

(PBB)

Polybrominated

Diphenyl Ethers

(PBDE)

PCB & Other

Components

O

○

Wires &

Connectors

for External

Connections

O

O：The quantity of poisonous or hazardous substances or elements found in each of the

component's parts is below the SJ/T 11363-2006-stipulated requirement.

X: The quantity of poisonous or hazardous substances or elements found in at least one of the

component's parts is beyond the SJ/T 11363-2006-stipulated requirement.

Note: The Environment Friendly Use Period as labeled on this product is applicable under normal

usage only

 
 
Preface      XI 
Pico-ITX Board      PICO- APL4 
Table of Contents 
 
Chapter 1 - Product Specifications.......................................................................................... 1 
1  Specifications ............................................................................................................ 2 
Chapter 2 – Hardware Information ....................................................................................... 5 
1  Dimensions ............................................................................................................... 6 
2  Jumpers and Connectors ....................................................................................... 9 
3  List of Jumpers ........................................................................................................ 11 
3.1  Auto Power Button Enable/Disable Selection (JP1) ......................... 11 
3.2  Clear CMOS Jumper (JP2) .................................................................... 11 
4  List of Connectors ................................................................................................... 12 
4.1  COM Port 2 (CN1) .................................................................................. 13 
4.2  COM Port 1 (CN2) .................................................................................. 15 
4.3  Front Panel Connector (CN3) .............................................................. 16 
4.4  M.2 Key-E Slot (2230) (CN4) ................................................................ 16 
4.5  M.2 Key-B Slot (2280) (CN5) ................................................................ 19 
4.6  BIO Port (Optional) (CN6) ................................................................... 22 
4.7  Digital I/O (CN7) .................................................................................... 25 
4.8  SATA Port (CN8) ..................................................................................... 26 
4.9  SPI Flash Programming Port (CN9) ................................................... 27 
4.10  +5V Output for SATA HDD (CN12) .................................................... 27 
4.11  HDMI Port (CN11) .................................................................................. 28 
4.12  Battery (CN12) ........................................................................................ 29 
4.13  LAN (RJ-45) Port1 (CN13) ..................................................................... 29 
4.14  LAN (RJ-45) Port2 (CN14) .................................................................... 30 
4.15  USB 3.0 Ports 0 and 1 (CN15) ............................................................... 31 
4.16  External Power Input (CN17) ............................................................... 32 
4.17  +12V DC Power Jack (Optional) (CN18) ............................................ 32 

 
 
Preface      XII 
Pico-ITX Board      PICO- APL4 
4.18  Embedded DisplayPort (Optional) (CN19) ....................................... 32 
4.19  USB 2.0 Port 2 (CN20) .......................................................................... 34 
4.20  USB 2.0 Port 1 (CN21) ........................................................................... 34 
4.21  LPC Port (CN22) .................................................................................... 35 
5  Electrical Specifications for I/O Ports ................................................................. 36 
6  Function Block ........................................................................................................ 37 
7  Assembly Options ................................................................................................. 38 
7.1  PICO-APL4-HSK01 ................................................................................. 38 
7.2  PICO-APL4-HSP01 ................................................................................. 39 
7.3  PICO-APL4-FAN01 ................................................................................. 40 
Chapter 3 - AMI BIOS Setup ................................................................................................. 41 
1  System Test and Initialization .............................................................................. 42 
2  AMI BIOS Setup ..................................................................................................... 43 
3  Setup Submenu: Main .......................................................................................... 44 
4  Setup Submenu: Advanced ................................................................................. 45 
4.1  Trusted Computing ............................................................................... 46 
4.2  CPU Configuration ................................................................................ 48 
4.3  SATA Configuration ............................................................................... 50 
4.4  Hardware Monitor .................................................................................. 51 
4.5  SIO Configuration ................................................................................. 52 
4.5.1  Serial Port 1 Configuration ..................................................... 53 
4.5.2  Serial Port 2 Configuration ..................................................... 54 
4.5  Digital IO Port Configuration .............................................................. 55 
4.6  Power Management ............................................................................. 56 
5  Setup submenu: Chipset ...................................................................................... 57 
5.1  North Bridge .......................................................................................... 58 
5.2  South Bridge ........................................................................................... 59 
6  Setup submenu: Security ..................................................................................... 60 

Preface XIII

Pico-ITX Board PICO- APL4

3.7 Setup submenu: Boot ............................................................................................ 61

3.8 Setup submenu: Exit ............................................................................................. 62

Chapter 4 – Drivers Installation ............................................................................................ 63

4.1 Driver Download/Installation .............................................................................. 64

Appendix A - I/O Information .............................................................................................. 66

A.1 I/O Address Map ................................................................................................... 67

A.2 Memory Address Map ......................................................................................... 68

A.3 IRQ Mapping Chart ............................................................................................... 69

Appendix B – Mating Connectors ....................................................................................... 72

B.1 List of Mating Connectors and Cables .............................................................. 73

Pico-ITX Board PICO-APL4

Chapter 1

Chapter 1 - Product Specifications

Chapter 1 – Product Specifications 2

Pico-ITX Board PICO-APL4

1.1 Specifications

System

Form Factor

PICO-ITX

CPU

Intel® Pentium® N4200 (4-core, 1.1 GHz, up to

2.5 GHz, TDP 6W)

Intel® Celeron® N3350 (2-core, 1.1 GHz, up to

2.4 GHz, TDP 6W)

Intel® Atom™ x7-Series (4-core 1.6GHz, up to

2.00 GHz, TDP 12W)

CPU Frequency

Up to 2.4GHz

Chipset

Intel SoC

Memory Type

Onboard DDR3L 2GB (Optional up to 4GB)

Max. Memory Capacity

Up to 4GB

BIOS

AMI/SPI

Wake On LAN

Yes

Watchdog Timer

255 Levels

Power Requirement

+12V, AT/ATX

Power Supply Type

Lockable & Phoenix Terminal co-lay

Power Consumption (Typical)

Intel Pentium N4200 at 1.1GHz with DDR3L 4GB:

1.43A at +12V

System Cooling

Heat-spreader

Heatsink with cooler (Optional)

Dimension

3.94" x 2.84" (100 mm x 72 mm)

Gross Weight

0.55 lbs. (0.25 kg)

Chapter 1 – Product Specifications 3

Pico-ITX Board PICO-APL4

System

Operating Temperature

32°F ~ 140°F (0°C ~ 60°C)

Storage Temperature

-40°F ~ 176°F (-40°C ~ 80°C)

Operating Humidity

0% ~ 90% relative humidity, non-condensing

MTBF (Hours)

191,895

Certification

CE, FCC

Display

Chipset

Intel SoC

Resolution

HDMI 1.4b: 3840 x 2160, 30Hz

Internal eDP: 3840 x 2160, 60Hz (Optional)

DDI (Optional from BIO)

LCD Interface

eDP

I/O

Storage/SSD

SATA 6.0 Gb/s x 1, 5V Power reserved

M.2 2280 (B Key) x 1

eMMC 32GB (Optional 16GB/64GB/128GB)

Ethernet

Realtek 8111G x 2

USB Port

USB 3.2 Gen 1 x 2 Rear IO

USB 2.0 x 2 (Internal, co-use with FAN connector)

Serial Port

COM1: RS-232 x 1

COM2: RS-232/422/485 x 1

Audio

—

DIO

4-bit

Chapter 1 – Product Specifications 4

Pico-ITX Board PICO-APL4

I/O

Expansion Slot

M.2 2230 x 1 (E-Key)

BIO x 1 (optional)

I2C

Smbus

SIM

—

TPM

—

Touch

—

Pico-ITX Board PICO-APL4

Chapter 2

Chapter 2 – Hardware Information

Chapter 2 – Hardware Information 6

Pico-ITX Board PICO-APL4

2.1 Dimensions

Component Side

Solder Side

Chapter 2 – Hardware Information 7

Pico-ITX Board PICO-APL4

Solder Side

Component Side

Solder Side

Page is loading ...

Aaeon PICO-APL4 User manual

Aaeon PICO-APL4 User manual

Related papers

Other documents