Minka Group K9614L-BNK User manual

Brand: Minka Group

Model: K9614L-BNK

Type: User manual

This manual is also suitable for

CAUTION: Before starting installation, disconnect

the power by turning off the circuit breaker or

removing the fuse at fuse box.

1. Remove the switch cup from the fan.

2. While holding the light kit assembly under your

fan, snap together the wire connection plugs .

3. Carefully push all wires back into the switch

cup, then install the light kit assembly onto the

mounting plate with 4 screws. Be sure to

tighten all screws. (Fig. 1)

4. Mount the glass shades

(Sold Separately) to the

light fixture by unscrewing partway the

thumbscrews on the glass holders, inserting

the glass, then gently tightening the

thumbscrews by hand evenly to the glass. DO

NOT OVER TIGHTEN. (Fig. 2)

5. Install 3 x 4W LED bulbs (provided). (Fig. 2)

Fig. 1

Fig. 2

CAUTION: To reduce The Risk Of Fire And

Electric Shock, This Light Kit Should Be Used

Only With The Fan Model F614. Manufactured By

Air Cool Industrial Co, Ltd.

Approximate maximum weight: 1.166 lbs

Manual design and all elements of manual design

are protected by U.S. Federal and/or State Law,

including Patent, Trademark and/or Copyright

laws.

Light kit

assembly

Screws

Molex

Glass shade

Light kit

assembly

Screws

4W Bulbs

ASSEMBLY INSTRUCTIONS

for Fan Light Kit,

Model# K9614L

BE SURE TO FOLLOW ALL STEPS IN THE ORDER GIVEN.

BE SURE POWER IS OFF AT FUSE, OR CIRCUIT BREAKER BOX.

READ AND SAVE THESE INSTRUCTIONS

1

Minka Group K9614L-BNK User manual

Brand: Minka Group

Model: K9614L-BNK

Type: User manual

This manual is also suitable for

Download PDF

Related papers

Other documents