Precision Power PH.10 User manual

Brand
Precision Power
Model
PH.10
Type
User manual

This manual is also suitable for

Precision Power PH.10 is a high-quality car subwoofer designed to deliver powerful and accurate bass response. It features a non-pressed paper pulp cone and high roll foam surround for excellent sound reproduction. The 2.0" 4-layer voice coil on an aluminum former ensures efficient heat dissipation and extended durability. With its nickel-plated 8ga compression terminals, the PH.10 can handle high power input, making it suitable for a variety of car audio systems. It has a dual 2ohm impedance, allowing for flexible wiring options. The PH.10's frequency response ranges from 39.12 Hz to 1.

Precision Power PH.10 is a high-quality car subwoofer designed to deliver powerful and accurate bass response. It features a non-pressed paper pulp cone and high roll foam surround for excellent sound reproduction. The 2.0" 4-layer voice coil on an aluminum former ensures efficient heat dissipation and extended durability. With its nickel-plated 8ga compression terminals, the PH.10 can handle high power input, making it suitable for a variety of car audio systems. It has a dual 2ohm impedance, allowing for flexible wiring options. The PH.10's frequency response ranges from 39.12 Hz to 1.

2012
PHANTOM
SUBWOOFERS
PH.10 PH.12 PH.15
Thank you for choosing PrecisionPower woofers. Designed and engi-
neered in the USA, this product combines innovative technology with
the finest materials to consistently deliver Absolutely State of the Art
performance, sound quality, reliability, and value. This PrecisionPower
product reflects our commitment to offer you unparalleled perfor-
mance and quality for years of dependable service and listening en-
joyment.
Non Pressed Paper Pulp Cone
High Roll Foam Surround
2.0” 4-layer VC on Aluminum Former
Nickel Plated 8ga. Compression Terminals
Poly-Cotton Suspension Spiders
Stamped Steal Frame
Vented T-Yoke Back-plate
Woven Fiber dust cap
Features, Parameters, & Dimensions
I
mpedance
d
ual
2
ohm
d
ual
2
ohm
d
ual
2
ohm
R
e
2.2009 2.2655 2.2110
F
s
(h
z
) 39.12 33.17 25.17
Q
es
1.3808 1.5087 1.2924
Q
ms
6.7067 7.0376 3.7318
Q
ts
1.1451 1.2424 0.9559
l
e
(
m
h) 0.9689 0.9656 1.0144
d
IameteR
10
Inch
12
Inch
12
Inch
sd 78.5398 In^2 113.0973 In^2 176.7146 In^2
V
as
(l) 30.4636 64.8921 163.3262
B
l
8.8105 9.1637 11.0581
s
en
82.9 83.7 84.7
Rms/max
720/1800 850/2000 1000/2200
c
ut
o
ut
d
Iam
9.6
Inch
11.6
Inch
14.5
Inch
m
ountIng
d
epth
5
5/8
Inch
6
Inch
6
7/8
Inch
p
h
.10 p
h
.12 p
h
.15
Enclosure Construction
Enclosure Dimensions
Enclosure Recommendations
Included in this manual are a number of different enclosure sugges-
tions. These are by no means the only enclosures to use, but they
provide a starting point to determine the correct enclosure for your
needs many factors must be addressed (amount of power, vehicle,
placement, crossovers, etc) Therefore, as always, PrecisionPower
recommends that your subwoofer be installed by an authorized Pre-
cisionPower dealer.
All enclosures should be made of .75” (3/4”) material only. When pos-
sible, make the baffle 1.5” (1 ½) thick and add .75” (3/4”) to the depth
of the enclosure to compensate. All volumes INCLUDE vent/port and
subwoofer displacements. DO NOT change the volume unless you
plan on adding a substantial amount of bracing. For added per-
formance, applying a coat of fiberglass resin to the interior walls will
greatly improve sealing the enclosure. Adding a thin layer of poly-fill
will improve response by smoothing out reflections within the enclo-
sure.
s
ealed
p
h
.10 p
h
.12 p
h
.15
m
In
.75
cu
Ft
. 1.0
cu
Ft
. 1.5
cu
Ft
.
o
ptImum
1.0
cu
Ft
. 1.5
cu
Ft
. 2.5
cu
Ft
.
p
oRted
m
In
1.0
cu
Ft
. 1.5
cu
Ft
. 2.5
cu
Ft
.
p
oRt
W
x
l 3
Inch
x
5.5
Inch
4
Inch
x
5
Inch
5
Inch
x
7.8
Inch
F3 (h
z
) 34 38 30
o
ptImum 1.5cu Ft. 2.25cu Ft. 2.75cu Ft.
p
oRt
W
x
l 4
Inch
x
6
Inch
6
Inch
x
7
Inch
6
Inch
x
7
Inch
F3 (h
z
) 32 34 28
PRECISION POWER AUDIO SUBWOOFERS
CAR AUDIO SUBWOOFERS
  • Page 1 1
  • Page 2 2
  • Page 3 3

Precision Power PH.10 User manual

Brand
Precision Power
Model
PH.10
Type
User manual
This manual is also suitable for

Precision Power PH.10 is a high-quality car subwoofer designed to deliver powerful and accurate bass response. It features a non-pressed paper pulp cone and high roll foam surround for excellent sound reproduction. The 2.0" 4-layer voice coil on an aluminum former ensures efficient heat dissipation and extended durability. With its nickel-plated 8ga compression terminals, the PH.10 can handle high power input, making it suitable for a variety of car audio systems. It has a dual 2ohm impedance, allowing for flexible wiring options. The PH.10's frequency response ranges from 39.12 Hz to 1.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents