AmazonBasics N/A User manual

Brand: AmazonBasics

Model: N/A

Type: User manual

AmazonBasics N/A is a versatile kitchen faucet designed to provide an enhanced user experience with its diverse features and functional design. It comes with a pull-down sprayer that effortlessly switches between stream and spray modes, making it ideal for various kitchen tasks like rinsing dishes, cleaning vegetables, or filling pots. The single-handle design allows for precise control over water flow and temperature, ensuring ease of use and efficient water management.

created by: Impala Services Ltd.

Page size: A4

B07F2C7FXL, B07F2C8RSH, B07F2NC6L9

Modern Single-Handled Kitchen Pull-Down Sprayer Faucet

Grifo de Cocina Monomando Abatible con Rociador Moderno

Robinet de Cuisine Moderne à Tête de Pulvérisation Rétractable à Poignée Simple

English .............................3

Español ............................8

Français .........................13

Welcome Guide

•

English

Contents:

Before getting started, ensure the package contains the following components:

Faucet x1 Sprayer hose weight x1

Rubber washer x1 Sprayer hose quick connector x1

Metal washer x1 Hexagon key x1

Mounting nut x1 Flexible hose (hot and cold) x1

Deck plate x1 1/2” Adapter x2

Deck plate gasket x1 Spare rubber washer x2

O-ring washer x1

Recommended Tools:

• Safety goggles x1 • Adjustable wrench x1

Part List

Parts Description Qty

Faucet x1

Cartridge (35 mm) x1

Pressing nut x1

Cap x1

Screw (H2.5 x M5 x 6) x1

Red and blue indicator x1

Handle x1

Hot water inlet x1

Cold water inlet x1

Sprayer inlet x1

Deck plate x1

Deck plate gasket x1

Quick connector x1

Threaded tube x1

Rubber washer (Ø47.8 x Ø33 x 2) x1

Metal washer (Ø47.8 x Ø33 x 2) x1

Mounting nut x1

Sprayer hose weight x1

Sprayer hose x1

Filter O-ring x1

Sprayer head x1

Flexible hose (hot) (M10 x 1-9/16-24UNEF-600) x1

Flexible hose (cold) (M10 x 1-9/16-24UNEF-600) x1

O-ring (Ø14 x Ø7 x 2.5) x2

Adapter x2

O-ring (Ø19 x Ø12 x 2) x2

Before First Use

Check for transport damage.

Risk of suffocation! Keep any packaging materials away from children – these materials are a potential

source of danger, e.g. suffocation.

Installation

Step 1:

Shut Off Water Supply

• Locate water supply inlets and shut off the water supply

valves. These are usually found under the sink or near

the water meter. If you are replacing an existing faucet,

remove the old faucet from the sink and remove any dirt

and/or plumber’s putty from around the faucet holes.

Step 2:

Setup

One (1) Hole Sink

Three (3) Hole Sink

Deck plate

gasket (L)

Deck plate (K)

For 1-Hole Installation

• Slide the hoses and threaded rod through the

sink hole.

For 3-Hole Installation

• Make sure the deck plate gasket (L) is inserted

into the bottom of the deck plate (K) and

position the deck plate over all 3 holes in the

sink.

• Slide the hoses and threaded rod through the

deck plate (K), deck plate gasket (L) and center

hole of the sink.

Step 3:

Mount in Place

Rubber washer (O)

Metal washer (P)

Mounting nut (Q)

• Slide the rubber washer (O) ﬁrst, then the metal

washer (P) and mounting nut (Q) over the water

lines and sprayer hose (U) and onto the shank.

Then hand-tighten.

Make sure the faucet or deck

plate (K) is centered over the sink hole(s) and

then ﬁnish tightening the mounting nut (Q) by

hand.

DANGER

NOTICE

Installation

Step 4:

Install Quick Connector

• Insert the O-ring into the sprayer inlet (J).

• Screw the quick connector (M) onto the cold

sprayer (J) and tighten by hand.

Do Not Overtighten.

Step 5:

Connect Water Lines

• Screw the male end of the hot water hose

(with red stripe) into the hot water inlet (H) and

tighten by hand.

•

Screw the male end of the cold water hose (with

blue stripe) into the cold water inlet (I) and tighten

by hand.

Step 6:

Connect Supply Lines

Flexible hose

(hot) (V)

Turn clockwise

Plumber’s

tape

Flexible hose

(cold) (W)

• Wrap plumber’s tape in a clockwise direction around the hot and cold

water inlet shank threads.

• Screw the faucet supply line with the red marking onto the hot water

inlet and screw the blue faucet supply line onto the cold water inlet.

• Tighten securely with a wrench.

If your water inlet valves have a 1/2” male threaded outlet,

use adapters (Y) to convert it to 9/16” threads.

CAUTION

NOTICE

Installation

Step 7:

Attach Sprayer Hose Weight

• Open the sprayer hose weight (R) by pressing

on its release tab.

• Place the weight (R) around the “Weight Here”

label and clasp the weight. You will hear a snap

when the weight is closed.

Be careful not to pinch your

skin or ﬁngers when closing the weight.

• Insert and push the sprayer hose (S) upward

into the quick connector (M).

Step 8:

Check and Run Water

Flexible

hose (hot)

Flexible hose

(hot) extension

(not provided)

Flexible hose (cold)

extension (not

provided)

Sprayer hose

Spray

mode

Stream

mode

Flexible hose (cold)

• Check to make sure the faucet is tight.

• Slowly open one water inlet valve and check for leaks; if no leaks, open the valve all the way.

• Slowly open the other water inlet valve and check for leaks; if no leaks, open the valve all the way.

If a leak is spotted, close the valve and remove the water line, along with the plumber’s tape on the

threads. Then re-tape the threads and connect the water line and repeat the procedure.

• Pull the handle (G) in the direction away from you and make sure there is hot water coming out of the faucet.

• Pull the handle (G) towards you and make sure there is cold water coming out of the faucet.

• Remove the sprayer head (U) from the holder and pull the hose out. Make sure there is nothing obstructing the hose

from being pulled out or retracted.

• With the water running, make sure that the sprayer head (U) can properly switch between stream and spray modes.

WARNING

NOTICE

Cleaning and Maintenance

• Avoid using abrasive chemicals when cleaning, read the cleaner product label prior to use.

IMPORTANT SAFEGUARDS

Read these instructions carefully and retain them for future use. If this product is passed to a third party, then these

instructions must be included.

When using the product, basic safety precautions should always be followed to reduce the risk of injury including the

following:

• To reduce the risk of injury or property damage, read all instructions before installing product.

• Wear safety goggles.

• Product must be installed in accordance with all state & local plumbing & building codes.

• Call a professional if you are uncertain about installing this product.

IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ

CAREFULLY.

Warranty Information

To obtain a copy of the warranty for this product:

Visit amazon.com/AmazonBasics/Warranty

— or —

Contact Customer Service at 1-866-216-1072

Feedback

Love it? Hate it?

Let us know with a customer review.

AmazonBasics is committed to delivering customer-driven products that live up to your high standards. We encourage you

to write a review sharing your experiences with the product.

Please visit: amazon.com/review/review-your-purchases#

For further services:

Visit amazon.com/gp/help/customer/contact-us

— or —

Contact Customer Service at 1-866-216-1072

MADE IN CHINA

amazon.com/AmazonBasics

AmazonBasics N/A User manual

AmazonBasics N/A User manual

AmazonBasics N/A User manual

Related papers

Other documents