Prostormer 3/8" Cordless Drill Driver Set, PROSTORMER 20V Max 2.0Ah Lithium Compact Drill User manual
- Category
- Power drills
- Type
- User manual
Instruction Manual
Cordless Drill MX01A
PRODUCT INTRODUCTION
BELIEVE THE POWER OF TOOLS.
1
Adapt to more application scenarios by adjusting
the rotation speed.
High/low speed
High-density lithium battery is used, with more than
1000 full charges and discharges, longer working life,
providing power more stably.
High-density lithium battery pack
FUNCTIONAL OPERATION
BELIEVE THE POWER OF TOOLS.
2
MX01A
BELIEVE THE POWER OF TOOLS.
3
Torque adjustment: Grasp the adjustment ring and turn it hard.
Figure
FUNCTIONAL OPERATION
The digital figure represents the level of torque from low to strong.
Individual models have impact gears. Turn the adjustment ring to
the impact gear to switch to: impact mode.
Battery replacement: Press and hold the handle battery unlock
button, pull the battery down to remove the battery; horizontally
insert the battery to the right till hear a sound “crack” to
complete the battery installation.
BELIEVE THE POWER OF TOOLS.
4
1. Switch with stepless speed regulation: With the pressing force,
the machine operation is gradually accelerated or decelerated.
Fig. 3
FUNCTIONAL OPERATION
2. Fast and slow gear switching function: 1 is slow gear 2 is fast
gear
Bit replacement: As shown in the figure, first adjust the torque to
below 3, hold the machine head by hand, and rotate the chuck
counterclockwise to release the chuck. Please lock it after installing
the bit.
FUNCTION DISTRIBUTION
BELIEVE THE POWER OF TOOLS.
5
MX01A
1、Chuck 2、Torque adjustment 3、Double-speed switching 4、LED lighting
5、Stepless speed regulator switch 6、Cooling hole 7、 Forward and reverse switching
8、 Belt buckle 9、Battery pack interface
8、Power indicator
1
9
7
3
4
6
5
8
2
BELIEVE THE POWER OF TOOLS.
6
10
FUNCTION DISTRIBUTION
Annex
BELIEVE THE POWER OF TOOLS.
8
This configuration is a list of standard accessories. Any package includes
these accessories. Users should check the accessories inside the package.
Please pay attention when charging the battery to avoid overcharging;
Lithium battery is flammable and explosive, please do not put it into fire,
or expose it to sunlight to avoid explosion!
DC charging port
20V 2000 mAh battery
BELIEVE THE POWER OF TOOLS.
9
Warning: Read the instructions. If you do not use or operate in accordance with the
instructions listed below, it may result in electric shock, fire, or serious injury.
Among all of the warnings listed below, the term "electric tool" refers to electrically
driven (wired) power tools or battery-driven (wireless) electrical tools.
Workplace
1. Keep the workplace clean and bright. Chaotic and dark places may cause accidents.
2. Do not operate the electric tool in an explosive environment, such as environment
with flammable liquid, gas or dust. Sparks generated by electric tools will ignite dust
or gas.
3. Operate the electric tool after children and onlookers leave. Distraction will make
you relax control.
Electrical Safety
4. The electric tool plug must match the socket. Do not modify the plug in any way.
Electric tools that need to be grounded cannot use any conversion plug. Unmodified
plugs and matching sockets will reduce the risk of electric shock.
5. Prevent human body from contacting with grounded surfaces, such as pipes, heat
sinks, and refrigerators. If your body is grounded, it will increase the risk of electric
shock.
6. Do not expose electric tools to rain or moisture. Water entering electric tools will
increase the risk of electric shock.
7. Do not abuse wires. Do not use wires to carry, pull electric tools, or pull out their
plugs. Keep the electric tool away from heat, oil, sharp edges or moving parts.
Damaged or entangled wires can increase the risk of electric shock.
8. When using electric tools outdoors, use an external cable suitable for outdoor use.
Wires suitable for outdoor use will reduce the risk of electric shock.
Personal safety
9. Be alert, pay attention to the operation and stay awake when operating the
electric tool. Don't operate the electric tool when you are tired, taking medicine,
drinking or under therapeutic response. Distraction during operation of the electric
tool will result in serious personal injury.
10. Use a safety device. Always wear goggles. Safety devices, such as dust masks,
non-slip safety shoes, helmets, hearing protection and other devices under
appropriate conditions can reduce personal injury.
SAFETY SPECIFICATIONS
Safety Specifications For Electric Tools
11. Avoid sudden starts. Make sure the switch is the off position when the plug is
inserted. Inserting the plug while fingers are put on the switch that is powered on
or when the switch is on may cause a hazard.
12. Remove all adjustment keys or wrenches before turning on the electric tool.
Wrench or key left on the rotating parts of the electric tool cause personal injury.
13. Don't stretch your hands too long. Always pay attention to the balance of your
feet and body, so that you can well control of the electric tool in unexpected
situations.
14. Dress properly. Do not wear loose clothes or jewelry. Keep your hair, clothes
and sleeves away from moving parts. Loose clothes, accessories or long hair may
get caught in moving parts.
15. If a device is provided for connection to chip conveyor or dust collector, make
sure they are well connected and used properly. Using these devices can reduce
the risk of debris.
Use of electric tools and precautions
16. Do not abuse electric tools, use appropriate electric tools according to the
application. Select the appropriate electric tools with design rated value will make
your work more effective and safer.
17. If the switch cannot turn the tool power on or off, the electric tool cannot be
used. Electric tools that cannot be controlled with a switch are dangerous and must
be repaired.
18. Before making any adjustments, replacing accessories or storing electric tools,
the plug must be unplugged from the power supply and/or the battery box must
be disconnected from the power supply. Such protective measures will reduce the
risk causd by sudden start of the electric tool.
19. Store unused electric tools outside the reach of children, and don't let people
who are unfamiliar with electric tools or do not understand the instructions operate
electric tools. Electric tools are dangerous in the hands of untrained users.
20. Maintain electric tools. Check whether the installation of moving parts is
deviated or stuck, and whether the parts are damaged, as well as other conditions
that affect the operation of the electric tool. In case of damage, the electric tool
must be repaired before use. Many accidents are caused by poorly maintained
electric tools.
21. Keep the cutting tool sharp and clean. Well-maintained tools with sharp cutting
edges are not easy to get stuck and are easy to control.
22. Consider the operating conditions and manners in accordance with the
instructions for use and the specific type of electric tool to be used to use electric
tools, accessories, and tool tips. Using electric tools for operations that do not
match the requirements may result in a hazardous situation.
BELIEVE THE POWER OF TOOLS.
10
SAFETY SPECIFICATIONS
Repair
23. Send your electric tool to qualified serviceman and replace it with the same spare
parts. This will ensure the safety of the repaired electric tool.
24. Follow the instructions in this manual when applying lubricating oil and replacing
accessories.
25. The handle must be kept dry, clean and free of grease.
Specific safety instructions
Do not forgive strictly complying with the safety terms of this product for the sake
of comfort during operation or for familiarity with the operation of this drill
(due to repeated use). If you do not use this tool safely and correctly, it will cause
serious personal injury.
1. If the cutting tool may touch the hidden wiring or its own wire during operation,
hold the insulated handle surface of the tool. Contact with a "live" wire can "charge"
the exposed metal parts of the tool and expose the operator to electrical shock.
2. Use clamps or other suitable measures to fix and support the workpiece to a stable
work surface. Hold the workpiece in hands or lean it on your body will make it
impossible to fix and may lose control.
3. Always wear safety glasses or goggles, and regular glasses or sunglasses are
not safe.
4. Hold the tool tightly.
5. Make sure the drill does not touch the workpiece before the switch is turned on.
6. Do not touch the moving parts with your hands.
7. Do not let the tool run when no one is present. Operate only when you hold
tool.
8. Be sure to turn off the switch and wait until the drill has completely stopped
before removing the saw blade from the workpiece.
9. Do not touch the drill bit or workpiece immediately after operation, for they may
be very hot and burn your skin.
10. Do not operate the tool when it’s not necessary.
11. Always wear proper protective mask/respirator when using drilling materials.
12. Some materials contain toxic chemicals. Please be careful to avoid dust inhalation
or skin contact. Please follow the security data provided by the material supplier.
Please keep this manual
WARNING: Misuse or negligence of the safety rules stated in this manual may
result in serious personal injury.
BELIEVE THE POWER OF TOOLS.
11
SAFETY INSTRUCTIONS
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
Prostormer 3/8" Cordless Drill Driver Set, PROSTORMER 20V Max 2.0Ah Lithium Compact Drill User manual
- Category
- Power drills
- Type
- User manual
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI