Highwood AD-DNA36-BKE Operating instructions

Type
Operating instructions
For information on Care and Cleaning or to register your
highwood product, please visit www.highwood-usa.com.
PAGE 1 OF 2
INCLUDED TOOLS
5/32" HEX KEY
IMPORTANT!
DO NOT fully tighten the bolts until all
bolts are started. Once all bolts are inserted,
go back & tighten all the bolts.
Retain these instructions for future reference
HARDWARE
high
wood
NATURE'S CLOSEST RIVAL
Adirondack Collection
Hamilton Deck Chair
Assembly Guide
1) Insert (1) "A" Bolt into Lower Hole on Each Side to
Attach Seat to Back. Make Sure the Back is Fully Upright.
Make Bolts Snug, but Do Not Overtighten.
AD-CHDA2
03.05.19
A
x10
1/4"-20 x 1-3/4"
A
SEAT
BACK
A
For information on Care and Cleaning or to register your
highwood product, please visit www.highwood-usa.com.
PAGE 2 OF 2
high
wood
NATURE'S CLOSEST RIVAL
Adirondack Collection
Hamilton Deck Chair
Assembly Guide
AD-CHDA2
03.05.19
2) With the Chair Laying on its Left Side, Attach
the Right Leg to the Seat using (3) "A" bolts.
3) Flip Chair and Lay on Right Side. Repeat for Left Leg.
Note: Arm Goes on
Top of Back Support
4) Attach Arms to the Back Using (2) "A" Bolts.
5) Tighten all Bolts. Enjoy your Highwood Chair!
RIGHT LEG
A
BACK
SEAT
BACK
LEFT ARM
RIGHT ARM
A
A
  • Page 1 1
  • Page 2 2

Highwood AD-DNA36-BKE Operating instructions

Type
Operating instructions

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI