2. Allied Brass
  3. RM-20-3-ABR

Allied Brass RM-20-3-ABR Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Allied Brass RM-20-3-ABR Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Step1: Drill Holes in Wall for screws or screw anchors
Determine your desired location for installation .Make a mark on the wall where each mounting screw will be placed as
shown below. Making sure unit is level. Drill a hole on each mark.
Step2: Attach unit to Mounting Surface.
No portion of this document or any artwork contained herein should reproduced in any way without the written consent of ALLIED BRASS INC.
INSTALLATION INSTRUCTIONS
RM-20-3
DRILLED HOLE
ANCHOR
THREADED INSERT
SCREW
CARD-58(CAP)
60.33 mm / 2
3
8
in
63.50 mm / 2
1
2
in
60.33 mm / 2
3
8
in
/