517 South 28th Street; Van Buren, AR
72956 T 479-474-3460 F 479-431-6875
The ProGear Racing GearSeat provides comfortable
and productive access for many shop tasks. Large
casters provide excellent mobility and the racing
inspired seat is made of heavy-duty materials and
hand-made craftsmanship.
The ProGear Racing GearSeat is a nice combination
of great looks and extraordinary function.
PROFESSIONAL
The
Assembly and Usage Instructions
Other ProGear Products
ProGear is a division of TraXion Engineered Products
Tools for Professionals
The ProGear Topside Creeper
The ProGear Widebody Creeper
PROFESSIONAL
TOOLS DIVISION
Contact Us
Phone: 1-479-474-3460
Email: info@traxionproducts
Or visit us on the web at www.traxionpro.com
Model 2-700
Assembly
Instructions v1 | 2-700
1
2
Using an allen key, attach four casters to the X-Frame
using the four lock washers and barrel nuts.
Slide the pnematic cylinder into
the X-Frame drop sleeve. Slide
the spinning Gear Tray onto the
cylinder.
33
Slide the Racing Seat base
onto the top of the pneumat-
ic cylinder. Frame, cylinder
and seat will all press fit
together.
Usage
TraXion Engineered Products | ProGear Line
Adjusting the Racing Seat Height
While sitting on the seat pull up on the height adjustment lever to
lower the seat height. To raise the seat lift your weight off the seat
and pull up on the lever.
Height Adjustment Lever
Barrel Nut
Lock Washer
x4
/
