![](//vs1.manuzoid.com/store/data-gzf/ff30602af0329b44359e3d53ed3e8e9b/2/000865407.htmlex.zip/bg2.jpg)
ENGLISH: COCKPIT SETUPS
Attaching the pedal set to a cockpit
- Attach the pedal set using the small threaded holes located beneath it.
- Drive two M6 screws (not included) through the cockpit shelf, then feed them into the
two small threaded holes located beneath the pedal set.
Important: The length of the M6 screws should not exceed the thickness of the shelf
+10 mm; longer screws could cause damage to internal components located in the
pedal set.