Toro Strobe Light Kit, GrandStand Mower Installation guide
- Type
- Installation guide
FormNo.3403-101RevA
StrobeLightKit
GrandStand
®
Mower
ModelNo.133-1495
InstallationInstructions
WARNING
CALIFORNIA
Proposition65Warning
ThisproductcontainsachemicalorchemicalsknowntotheStateofCaliforniato
causecancer,birthdefects,orreproductiveharm.
Note:YoumustinstalltheLightKit(soldseparately)beforeinstallingthiskit.
Installation
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.
Description
Qty.
Use
Strobe-lightassembly
2
Screw
4
Nut4
Installthekit.
InstallingtheKit
1.Shutofftheengine,waitforallmovingpartstostop,
engagetheparkingbrake,andremovethekey.
2.Removethenegative(-)batterycablefromthebattery.
3.Removethefueltank;refertotheOperator’sManualfor
themachine.
4.Feedthewirefor1strobelightthroughtheholeonthe
sideofthemachineshowninFigure1andsecurethe
lightwith2boltsand2nuts.
Note:Repeatthisstepfortheotherstrobelighton
theothersideofthemachine.
Figure1
LeftSideoftheMachineShown
1.Nut
3.Screw
2.Strobelight
©2015—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.Toro.com.
OriginalInstructions(EN)
PrintedintheUSA
AllRightsReserved
*3403-101*A
-
1
-
2
