Legrand 2411DFO-FW Installation guide

Type
Installation guide
Wiremold
®
Electrical Systems conform with, and should be
installed and properly grounded in compliance with requirements of
the current National Electrical Code or codes administered by local
authorities. All electrical products may represent a possible shock
or fire hazard if improperly installed or used. Wiremold electrical
products are UL Listed, made for interior use and should be
installed by qualified electrical professionals in conformance with
current local codes and/or the National Electrical Code.
V2400 Divided and Undivided Steel Raceway
INSTALLATION INSTRUCTIONS
Use #8 (5/16", [7.9mm] head size) flat head fastener or equivalent to mount base to surface.
Utiliser une à tête plate de calibre 8 (tête de 7.9mm, 5/16" po.) ou une fixation équivalente pour assujettir le tube guide-fils et les raccords a la surface de montage.
Use un sujetador de cabeza plana No.8 (tamaño de cabeza: 7.9mm, 5/16" de pulgada) o su equivalente para unir la canalita y los accesorios a la superficie de montaje.
V2417DFO Divided FiberReady Internal Elbow
V2417FO Undivided FiberReady
Internal Elbow
V2418FO Undivided FiberReady
External Elbow
V2418DFO Divided FiberReady External Elbow
V2411DFO Divided FiberReady 90 Degree Flat Elbow
V2411FO Undivided FiberReady 90 Degree Flat Elbow
OR
1 2
1 2
1
2
1
2
1
2
1
2
3
4
1
4
2 3
5
6
© Copyright 2001 The Wiremold Company All Rights Reserved • 60 Woodlawn Street, West Hartford, CT 06110 • 1-800-621-0049 • Fax 860-232-2062 www.wiremold.com 41858R2 901
V2410DFO FiberReady
Entrance End Fitting
1
2
3
1
V2415DFO Divided FiberReady
Tee Fitting
V2415FO FiberReady
Tee Fitting
2
–OR
B
A
  • Page 1 1
  • Page 2 2

Legrand 2411DFO-FW Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages