Furniture of America YNJ-18702C1 Installation guide

E-commerce-Enitial Lab

ASSEMBLY RATING

The Assembly Rating is a 5-point

system that shows the degree of effort

needed in assembling a specific

product (with 1 being easy and 5 being

difficult). For most products, two

persons are recommended.

EASY

DIFFICULT

Page 1

ASSEMBLY INSTRUCTIONS

18.11.12

YNJ-18702C1

Tools Required for Assembly

2 PERSON RECOMMENDED

Phillips Screwdriver

(Not Included)

Allen Wrench

(Included)

Thank you for your purchase!

We hope you will enjoy your new product for many years to come. Our commitment

to providing quality products does not simply end when a purchase is made. We

stand behind our products and will provide any support needed in order for you to

fully enjoy your purchase. Your satisfaction is the greatest recognition we could

have.

Because we value your trust in our company, we will do our best to meet your

service expectations. Should you have any assembly related questions, parts

replacement requests, comments or suggestions, please feel free to contact us any

time. To help expedite the service, please have the assembly instructions available,

along with your order receipt.

[email protected]

www.foagroup.com

Toll-Free 1-888-980-5122 or 1-626-363-9311

1-626-270-4451

Monday to Friday 8:30 a.m. to 5:30 p.m. (PST)

https://twitter.com/foagroup

http://www.pinterest.com/foagroup/

http://instagram.com/foagroup#

https://www.youtube.com/user/FurnitureOfAmerica

Page 2

Page 3

Unless you are particularly adept at assembling ﬂat-pack/knock-down

furniture, we understand building ready-to-assemble furniture can be a

frustrating experience for some. To help avoid confusion and to make

the assembly process quicker and smoother, we have provided some

helpful tips. Before you begin the assembly, please read the following:

1.

Due to the size and/or weight on most of the ready-to-assemble furniture, it is

highly recommended that the assembly should be done near the area of its

intended location. Make sure you have enough space to move around during

the assembly. ALWAYS have at least two people to help with transporting and

assembling of the product to avoid any potential injury and/or damage.

2. To protect from damage, assemble the item on a clean, protective surface,

such as on a carpet or cardboard.

3. Make sure you have taken all the parts and hardware out of their packaging.

Do not throw away packaging material until assembly is completed.

4. Make

sure all parts and hardware are accounted for by comparing the actual

parts and hardware to the list provided in the assembly instructions. Also

check for any irregularity such as crack, ﬂaw or improperly drilled hole. If there

is any problem or missing piece, please contact the manufacturer or the

supplier. Please have the model number, part number and a brief description

of the problem ready will help expedite the replacement process.

5. Read the entire instruction manual and view the diagrams ﬁrst before

assembling. Arrange your parts in order of use and group the identical

hardware together to make it easier to grab each piece as you begin to

assemble.

6. During the assembly process, make sure all parts are properly aligned before

tightening with the tool provided or required for the assembly. Do not use

power tools and do not over tighten.

7. When applying glue to the wood dowels to bond the parts together, please be

ABSOLUTELY certain that the parts are correct and lined up with each other

(refer to diagrams and take notice of the various pre-drilled hole locations).

When in doubt, assemble the parts together ﬁrst and if the parts ﬁt right, then

apply glue to the wood dowels.

PRE-ASSEMBLY INTRODUCTION

Page 4

CAM LOCK FASTENER ASSEMBLY INSTRUCTIONS

ly

Page 5

1"

Please keep for future reference

MODEL # YNJ-18702C1

PARTS LIST

BUFFET

ASSEMBLY INSTRUCTIONS

47.25" (W) X15.75" (D) X40.31" (H)

DIMENSIONS

Before you

begin, please

read "Assembly and

Care Advice","Pre-

Assembly Introduction"

and "Cam Lock Fastener

Assembly Instructions"

Page 6

D

1PC

B

E

4PCS

2PCS

G

40.31"

F

2PCS

I

1PC

J

1PC

K

4PCS

L

4PCS

M

1PC

A

1PC

C

1PC

H

4PCS

47.

2

5"

1

5.75"

HARDWARE LIST

1

12PCS 12PCS

2

4

16PCS

6

3PCS 2PCS

8

4PCS

5

6PCS

3

9

2PCS

10

12PCS

1.25"

11

15PCS

12

4PCS

1PC

7

1.97"

0.5"

28PCS

14

1PC

13 15

1PC

4PCS

21

1PC

20

1PC

19

1SET

18

1PC

17

1PC

16

0.63"

0.59"

0.71" 0.59"

A

I

J

B

D

C

0.87"

10PCS

22

Page 7

BUFFET

MODEL #YNJ-18702C1

Get Ready.

Please group boards as below.

Body

Door

Feet

E

2PCS

H

2PCS

1PC

B

C

1PC

D

1PC

F

1PC

2PCS

G

A

1PC

F

1PC

K

4PCS

I

1PC

J

1PC

L

4PCS

M

1PC

E

2PCS

H

2PCS

ASSEMBLY INSTRUCTIONS

Page 8

STEP1

Hardware #1=12pcs

Hardware #3=6pcs

Hardware #20=1pc

Hardware #21=4pcs

16

3

A

1

20

21

1

B

3

1

C

3

1

D

3

F

X2

3

G

X2

Use a dab of glue in dowel holes

before inserting dowels (#3).

ASSEMBLY INSTRUCTIONS

STEP2

Hardware #6=3pcs

Hardware #8=2pcs

Hardware #7=1pc

Page 9

Hardware #9=2pcs

Hardware #10=12pcs

9

10

X2

I

7

8

6

I

J

6

Fold panel (#I) to a 90 degree

angle to secure handle (#7)

onto panel (#I).

ASSEMBLY INSTRUCTIONS

Page 10

STEP3

Hardware #4=8pcs

H

E

4

1

2

Please refer to page 5 on how to

fasten cam locks(#2) to cam

bolts (#1).

2

G

C

G

D

2

Hardware #2=6pcs

F

A

2

ASSEMBLY INSTRUCTIONS

Page 11

STEP4

Hardware #2=2pcs

2

F

B

Hardware #14=16pcs

Hardware #11=12pcs

Hardware #12=4pcs

12

X4

11

L

Secure leg to panel (#B) with

screws (#14).The lower point

of the leg attachment (#12)

should face the corners of

panel (#B).

14

HIGH

LOW

X4

1

2

B

L

ASSEMBLY INSTRUCTIONS

Page 12

STEP6

1

2

Hardware #2=2pcs

13

11

M

Hardware #15=1pc

Hardware #13=1pc

Hardware #14=4pcs

Hardware #11=3pcs

STEP5

14

13

14

15

M

B

2

K

A

D

Back panels (#K) slides to

the thin lined gaps of the

panels.

The wine glass rack (#20) is on

this half side of panel (#A) on

the other side.

ASSEMBLY INSTRUCTIONS

Page 13

STEP7

Hardware #2=2pcs

Do not tighten up screws.

2

K

A

C

Hardware #5=4pcs

1

2

B

D

C

K

5

ASSEMBLY INSTRUCTIONS

Page 14

STEP8

E

H

E

Slide panels (#E) to the

V-grooves of the unit.

ASSEMBLY INSTRUCTIONS

Page 15

STEP9

Hardware #4=8pcs

E

4

E

H

Insert panels (#H) to the other panel (#H) in the unit

then secure by using screws (#4).

ASSEMBLY INSTRUCTIONS

Page 16

STEP10

Hardware #22=10pcs

Make sure to tight up all screws

before putting product in right

position.

Use the provided

stickers (#22) to

cover exposed

locks.

X4

X2

ASSEMBLY INSTRUCTIONS

Page 17

STEP12

STEP11

A

I

J

B

Insert the top door pins on the

door panels (#J,I) first before the

bottom door pin.

Hardware #14=8pcs

14

K

Secure back panels (#K) by

using screws (#14).

ASSEMBLY INSTRUCTIONS

Page 18

ASSEMBLY IS COMPLETED

Make

sure

the product is rested on a ﬂat surface and does not feel loose or wobbly. If it does, double

check that the bolts/screws are secured and properly tightened.

STEP13

Hardware #19=1pc

Hardware #17=1pc

Hardware #18=1set

Wall

18

19

18

17

For safety,please use the strap

to secure the uniton the wall.

Page 19

Furniture of America YNJ-18702C1 Installation guide

Furniture of America YNJ-18702C1 Installation guide

Related papers

Other documents