Stone & Beam ALT0316051 User manual

ASSEMBLY INSTRUCTION

ASIN NO. : B073751DML

In order to ensure safety and maximize the lifetime of the lamp, please

make sure to read the following instructions thoroughly before assembly.

Assembly Instructions:

Note: Electrical wire is connected continuously through the poles.

Please DO NOT pull wire during unpacking. Bad connections may result.

1. Unpack all parts from carton carefully.

2. Place LED Bulb (C) onto Socket (B).

3. Place the Harp (D) onto Horn Rack, place the Fabric Shade (E) onto the Harp (D),

and secure with the Finial (F).

4. Assembly is completed.

WARNING:

1. Use Type A Bulb of LED 10W maximum (Bulb included)

2. Do not use polishes or cleaners on your lamp.

Simply wipe clean with a soft cloth.

Made in China