Workbench
Leg
Lift
Pedal
Caster Plate
Mount
Lift
Bracket
Floor
2”
4¾”
Steel Post
or leg
Lift
Pedal
Lift
Bracket
Floor
2”
4¾”
Installation Instructions:
1. Mark your drill points on the workbench leg at the 2” and 4-3/4” marks respespectively
2. Drill the pilot holes on the workbench leg.
3. Attach the lift bracket and pedal to the workbench leg using the wood screws provided.
4. Attach the casters to the lift bracket assembly using the nuts and lock washer that are
provided.
Please Note: You may need to remove the caster wheel from the caster plate to attach and secure the lift bracket to
the workbench leg.
The Workbench Casters can be used on many
dierent tables or stands other than work-
benches. This includes router table stands, lathe
stands or anywhere in your shop where you
need mobility for a larger item. When installing
the casters on metal stands you will need to use
nuts, bolts and washers (not included) to prop-
erly secure the assembly. The same process as
shown above should be followed.
Workbench Caster
Mounting Instructions
Other General Applications
Caster Plate
Mount
-
1
PowerTec Workbench Caster Operating instructions
- Type
- Operating instructions
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Borroughs HD21-WB362-EC-040 Installation guide
-
Husky WSH72FWB User manual
-
Ranger RWB-2D Owner's manual
-
JET JWSS-18 Owner's manual
-
RIDGID TS3660 User manual
-
-
-
-
Grizzly W1872 Owner's manual
-
