Belknap Hill Trading Post 237250 Installation guide

Category
Racks
Type
Installation guide
A
B
C
Step 1
Final assembly
THE DIAGRAMS AND INSTRUCTIONS IN THIS BROCHURE ARE FOR ILLUSTRATION PURPOSES ONLY AND ARE NOT MEANT TO REPLACE A LICENSED PROFESSIONAL. ANY CONSTRUCTION OR USE OF
THE PRODUCT MUST BE IN ACCORDANCE WITH ALL LOCAL ZONING AND/OR BUILDING CODES. THE CONSUMER ASSUMES ALL RISKS AND LIABILITY ASSOCIATED WITH THE CONSTRUCTION OR USE
OF THIS PRODUCT. THE CONSUMER OR CONTRACTOR SHOULD TAKE ALL NECESSARY STEPS TO ENSURE THE SAFETY OF EVERYONE INVOLVED IN THE PROJECT, INCLUDING, BUT NOT LIMITED TO,
WEARING THE APPROPRIATE SAFETY EQUIPMENT. EXCEPT AS CONTAINED IN THE WRITTEN LIMITED WARRANTY, THE WARRANTOR DOES NOT PROVIDE ANY OTHER WARRANTY, EITHER EXPRESS
OR IMPLIED, AND SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING CONSEQUENTIAL DAMAGES.
©2015 Universal Forest Products, Inc. All rights reserved.
UFP Woodburn LLC
2895 Progress Way | Woodburn, OR 97071 | 503-226-6240
Assembled in the USA with imported components. 8533 10/15
www.BelknapHill.com
FIREWOOD RACK
ASSEMBLY INSTRUCTIONS
Contents
2 – Foot supports (A) • 5 – Brace supports (B) • 2 – Frames (C)
Completely insert the grooves of the foot supports (A) into the grooves of each
frame (C).
Step 1
The firewood rack uses grooves in the frame, brace and foot components for quick
assembly and disassembly. When assembling, make sure the pieces have been
completely inserted into the appropriate grooves.
Insert the grooves of the brace supports (B) into the grooves of each frame.
Step 2
  • Page 1 1

Belknap Hill Trading Post 237250 Installation guide

Category
Racks
Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI