Trademark Innovations TEEPEE-5FT Operating instructions

TEEPEE

Assembly Instructions

STEP 1

STEP 3

STEP 5

A - (5) Top half of Pole (has hole at one end) B - (5) Bottom half of Pole (has no hole)

C - (5) Pole Connectors D - (1) String E - (1) Teepee Fabric Cover

Connect the 5 A poles to the 5 B poles using the 5 C connectors.

Begin inserting the poles into the channels

on the outside of the teepee cover.

Make sure the end of the pole with the hole

is at the top of the fabric cover.

Tie a knot using the fabric tie at the top of

teepee to string from step 3 to secure fabric.

Once all of the poles are in the channels, it’s time to thread the string.

Insert the string provided into a pole and continue around the circle of

poles until you have made a circle.

Then tie the string off with a bow and a knot.

Set up your Teepee in your desired location by spreading the poles apart. Now

that your Teepee is set up you can open and close the window and door with

the Velcro strips.

We hope you are satisfied

with this product and that it

meets your expectations. If

there are any parts missing or

if there are any other issues

with your product, please feel

free to contact us at

1-800-906-1639

Your teepee is now complete.

A B

C D

STEP 2

STEP 4