2. DKS
  3. Microphone Retro-Fit Kit

DKS Microphone Retro-Fit Kit User manual

  • Hello! I am an AI chatbot trained to assist you with the DKS Microphone Retro-Fit Kit User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
GROUP:
DOCUMENT NUMBER:
REVISION:
Microphone Installation
A
1998-065-A-10-06
Telephone Entry






DOORKING

































1. Remove microphone board.
2. Cut wire ties and remove wires.
3. Unscrew the wire terminals.
4. Screw new wire terminals to terminal strip.
5. Route wire harness through the wire shield.
NOTE: Do not screw the board down until the
microphone volume sensitivity has been adjusted.
6. Install and fasten microphone board.
Adjust Sensitivity
1. Use Phillips screwdriver to adjust the volume sensitivity.
2. Turn clockwise to increase the volume sensitivity.
3. Turn counter-clockwise to decrease the volume
sensitivity.
1998-065-A-10-06
/