Ergodyne 5550 Operating instructions

Type
Operating instructions

This manual is also suitable for

TENACIOUS WORK GEAR®ERGODYNE.COM / 800 225 8238 ERGODYNE
// INSPECTING ARSENAL
®
TOOL STORAGE PRODUCTS
Inspect Arsenal
®
Tool Storage products before and after each use.
All equipment should be regularly inspected. Check the following:
Examine fabric, webbing, stitching and other soft materials for cuts, tears, heat trauma,
frays or other damage.
Examine all hardware and d-rings for rust or corrosion, abnormal distortion (twists, bends),
cracks or breaks, or any other damage.
Examine carabiners, hooks and other connectors for proper function and any damage
suggested above.
Examine swivels, modular buckles, and any other components, to ensure proper function
and that nothing is damaged.
Ensure zippers function and open and close properly.
Consider whether any of the above inhibits the safety of the product and consider
replacement if necessary.
// STORAGE AND CARE
Store containers in a clean, dry location, away from direct sunlight. Clean containers using
mild soap and water, and then air dry.
// DISCLAIMER
In no event, shall Tenacious Holdings, Inc., be liable for any direct, indirect, punitive,
incidental, special, or consequential damages arising out of, or associated with, the misuse
of Arsenal
®
Containers.
TOOL STORAGE PRODUCTS
USE AS INTENDED AND NOT IN A MANNER THAT MAY BE DEEMED UNSAFE.
TENACIOUS SINCE 1983.
INTERGALACTIC HEADQUARTERS: 44˚ 58' 18.31" N 93˚ 09' 12.88" W ALT. 934 FT.
1021 BANDANA BOULEVARD EAST SUITE 220 SAINT PAUL, MN, USA 55108
PHONE 651 642 9889 // 800 225 8238 WWW.ERGODYNE.COM
  • Page 1 1

Ergodyne 5550 Operating instructions

Type
Operating instructions
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI